The variable current_workspace, that contains the current workspace
is moved to the global workspace properties.
Now the screen is not needed to know the workspace_count.
This patch changes the keybinding check in cycling keyrelease.
Now, the variable binding contains the keypressed, so we can
check if the key pressed is the same than the keybinding. If
the keybinding is different (user press other key) then finish.
Without the loop, the code is faster.
Then, the keybinding variable is not used anymore, and can be removed.
Signed-off-by: Rodolfo García Peñas (kix) <kix@kix.es>
The function StartWindozeCycle() uses now the variable WShortKey
to store the shortcut key.
The code is the same, but now the hasModifier variable is calculated
in only one place.
Signed-off-by: Rodolfo García Peñas (kix) <kix@kix.es>
Explicitly match a Return keypress in the switchpanel, so that the
currently selected window is focused without the keypress event being
handled elsewhere.
Pressing Return to commit the window selection is intuitive but other
shortcuts may bind Return. Any keypress not explicitly handled in the
switchpanel code will be passed through to other shortcut processing.
If, for example, alt+return were mapped to Select Window and the
switchpanel is open, pressing return while holding alt would both commit
the window change AND select the window, which is not intuitive.
If the new preference SwitchPanelOnlyOpen is set to YES, pressing
alt-tab or similar shortcut will only open the panel without
automatically switching to the next window. Shortcuts will continue to
function normally once the panel is open.
Users can enable the new preference if they find themselves regularly
opening the switchpanel just to visualise which windows are open, or to
initiate same-class cycling.
The default value of the new preference is NO. Behaviour is unchanged
unless the preference is explicitly enabled with the following command:
$ wdwrite WindowMaker SwitchPanelOnlyOpen YES
The file cycling.h includes the function prototypes for cycling.c.
The prototypes included were moved from funcs.h.
Signed-off-by: Rodolfo García Peñas (kix) <kix@kix.es>
A while loop in StartWindozeCycle() was checking the value of the panel
pointer and setting a flag to break out of the loop if it were NULL.
The current iteration of the loop was allowed to continue, however, with
the result that the null pointer could be passed to one of the
switchpanel functions and cause a segfault.
To reproduce, close all windows except one. Open the inspector and set
the window's "Do not show in the switch panel" flag. Then close the
inspector and press alt-tab to open the switchpanel. As there is only
one window and it is not allowed to appear in the switchpanel, a null
panel pointer is returned, then later passed to wSwitchPanelSelectNext()
causing wmaker to crash.
The fix is to break out of the loop immediately instead of setting the
done flag.
If the switchpanel was opened with either FocusNextKey or FocusPrevKey
shortcut, and the user presses GroupNextKey or GroupPrevKey, skip over
windows of a different class when cycling through windows in the
switchpanel.
In the case where the switchpanel was opened with FocusNextKey or
FocusPrevKey initially, the check can be skipped because all the
available choices are necessarily of the same class already.
The hasModifier flag was set if the FocusNextKey or FocusPrevKey
shortcuts had modifiers, depending on which shortcut was used to open
the switchpanel.
The switchpanel can also be opened with the GroupNextKey or GroupPrevKey
shortcuts, so we should account for those when setting hasModifier.
As the name implies, StartWindozeCycle() cycles windows in the same way
that a popular commercially-available operating system does. However
Window Maker's handling of the shift key in the switchpanel does not
currently mirror that of its commercial counterpart.
In the popular operating system:
Holding alt and shift then pressing and releasing tab will highlight
the previous window in the switcher.
Releasing shift with alt still held will not close the switcher.
The window change is commited when alt is released.
In Window Maker:
Holding alt and shift then pressing and releasing tab will highlight
the previous window in the switchpanel.
Releasing shift with alt still held will close the switchpanel and commit
the window change.
This patch adds the StrictWindozeCycle boolean preference. When it is
set to YES the switchpanel will remain open as long as alt is held even
if shift is pressed and released.
Added CycleIgnoreMinimized configuration option settable on Expert page in WPrefs.
When option is set, switch panel cycling ignores minimized (grayed) windows. They
are still visible and can be selected using left/right arrows or mouse click.
The problem was the following. While alt-tabbing from one
window to a xterm, wait for the xterm to be raised but
keep the alt key pressed. Now move the mouse cursor
over the xterm and release the alt key.
The result is a xterm in a zoombie focused state; its titlebar
has the focused color but xterm itself is not focused and does
not accept any input.
Fix this by reinstating the check for a NULL pointer from
wSwitchPanelHandleEvent() before changing focus. That function
detects if the mouse cursor moved over to the same window which
is currently being pointed out by the switchpanel, and returns
NULL in this case (the check for panel->current != focus fails).
Thanks to Paul Harris for reporting it!
For those not familiar with the way Macs cycle windows, the Command-Tab
sequence (Alt-Tab elsewhere) switches between DIFFERENT application windows
and Command-Grave (key above tab) switches between windows owned by the
SAME application as is currently focused. So if you had three Safari and
two Finder windows open, and Safari had focus, Command-Tab would switch to
Finder; Command-Tab would switch back to Safari; Command-Grave would switch
to a different Safari window etc.
This patch implements "something like" the above by only populating the
switchpanel with windows matching the currently-focused WWindow's wm_class
when the new cycling mode is activated. In practice this means you can
switch to The Next XTerm or The Next Firefox Window using this method.
The configuration names for these new shortcuts are GroupNext and
GroupPrev. The patch tells WPrefs.app about them. Of course switching to
The Next Window is still possible with the (unchanged) FocusNext and
FocusPrev keys.
These are some of the fixes sent to the wmaker-dev list by
Vladimir Nadvornik, with minor modifications to address Dan
Pascu's concerns.
Original-post: http://lists.windowmaker.info/dev/msg00293.html
The switch panel was not being destroyed with the realease of
FOCUSPREV, only with FOCUSNEXT. Fix this.
One can reproduce this bug as follows.
In the "Keyboard Shortcut Preferences" of WPrefs set "Focus next window"
to e.g. "Alt+Tab" and "Focus previous window" to "Ctrl+Tab".
The switchpanel is not destroyed if we release "Ctrl+Tab" but it
is upon releasing of "Alt+Tab".
Retrieved-from: http://git.altlinux.org/people/voins/packages/?p=WindowMaker.git;a=commit;h=51c95a55c9310f499b1fdeca138106ca7bf74423
[crmafra: Commit log]
Daniel Déchelotte reported one problem with the escape handling in
the switchpanel:
"Start with two windows: a fullscreen one, and a smaller window
that appears above the fullscreen one. With the mouse, focus the
bigger window. Start alt-tabbing, then press Escape. The bigger
window will then be focused (good) *and raised* (small problem)."
Fix this by adding a test for the escape key before calling
raiseWindow().
1. Setup two windows in a workspace, one at the center and the
other at a corner. Move the mouse to the center of the screen, so
that the focus goes to the center window. Now, with the help of the
keyboard (with Alt-tab, typically), try and switch the focus to the
other window. In doing so, the switch panel shows up, gives the
focus to the other window and then disappears. However, its
disappearance make it seem to wmaker that the mouse has just
entered the center window, so wmaker gives the focus to that
window again.
2. It is a lit bit more involved. "Raise window when switching
focus with keyboard" needs to be set. In a given workspace, maximize
a first window A, then setup "above" window A two windows B and C
(one in the upper left corner and the other one in the lower right
corner, for example). Move the mouse so as to give the focus to
window B. Press the Alt key, hit the key tab once (window A moves
up to the "top"), then another time (window C is then selected).
Eventually relase the Alt key: window B is given the focus again.
Correction: it is a matter of ignoring some (EnterNotify) events
when the switch panel is active or has just been used.
Pressing the escape key (ESC) while the switchpanel is active
cancels it and gives the focus back to the window which had it
before the switchpanel was invoked.
If all windows are minimized before the switchpanel was called,
they will continue to be if ESC is pressed.
In other words, pressing ESC is like going to the parallel universe
where you never entered the switchpanel in the first place.
Based on a patch by Nicolas Bonifas from 17.08.2009.
This way we avoid code duplication in 6 places.
This changes the previous behavior of the first
instance because the helper function has an extra
CommitStacking(scr);
compared to the original code. But it should not
hurt to have it.
We can get rid of one overall tab by moving the
if(swpanel)
test -- which was done everytime in each individual case --
to the beginning, therefore encompassing all cases.
for arq in `git ls-files *.c`; do
echo $arq;
indent -linux -l115 $arq;
done
The different line break at 115 columns is because
I use a widescreen monitor :-)
Christophe CURISandCarlos R. Mafra
Rodolfo García Peñas (kix)andCarlos R. Mafra
Iain PattersonandCarlos R. Mafra
Martin FrydlandCarlos R. Mafra
Tamas TEVESZandCarlos R. Mafra
Vladimir NadvornikandCarlos R. Mafra
Alexey VoinovandCarlos R. Mafra
Nicolas BonifasandCarlos R. Mafra
Daniel DéchelotteandCarlos R. Mafra
kojima