Problem: tests: some issues with termdebug mapping test
Solution: Use assert_{true,false} if suitable, change
order of expected and actual arguments in assert() calls.
(Ken Takata)
closes: #14818
related: 7fbbd7f
Signed-off-by: Ken Takata <kentkt@csc.jp>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: getregionpos() wrong with blockwise mode and multibyte.
Solution: Use textcol and textlen instead of start_vcol and end_vcol.
Handle coladd properly (zeertzjq).
Also remove unnecessary buflist_findnr() in add_regionpos_range(), as
getregionpos() has already switched buffer.
closes: #14805
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: function echo_string_core() is too long
Solution: Refactor into several smaller functions
(Yegappan Lakshmanan)
closes: #14804
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: :browse oldfiles prompts even with single entry
Solution: Do not prompt, but edit the file directly,
also when using :filter /pat/ browse oldfiles
closes: #14794
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: eval.c not sufficiently tested
Solution: Add a few more additional tests for eval.c,
(Yegappan Lakshmanan)
closes: #14799
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot move to previous/next rare word
(Colin Kennedy)
Solution: Add the ]r and [r motions (Christ van Willegen)
fixes: #14773closes: #14780
Signed-off-by: Christ van Willegen - van Noort <github.com@vanwillegen-vannoort.nl>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: some screen dump tests can be improved (after 9.1.0414)
Solution: Make sure screen state changes properly and is captured in the
screen dumps (Luuk van Baal)
closes: #14788
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Some functions are not tested
Solution: Add a few more tests, fix a few minor problems
(Yegappan Lakshmanan)
closes: #14789
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Unable to leave long line with 'smoothscroll' and 'scrolloff'.
Corrupted screen near the end of a long line with 'scrolloff'.
(Ernie Rael, after 9.1.0280)
Solution: Only correct cursor in case scroll_cursor_bot() was not itself
called to make the cursor visible. Avoid adjusting for
'scrolloff' beyond the text line height (Luuk van Baal)
fixes: #14726closes: #14783
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: smoothscroll may cause infinite loop, with
very narrow windows
(Jaehwang Jung, after v9.1.0280)
Solution: Check for width1 being negative, verify
that win_linetabsize does not overflow
fixes: #14750closes: #14772
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: No scrolling happens with half-page scrolling with line
filling entire window when 'smoothscroll' is disabled.
(Mathias Rav, after v9.1.0285)
Solution: Adjust amount to move cursor by so that it is moved the same
number of lines as was scrolled, even when scrolling different
number of lines than requested with 'nosmoothscroll'.
fixes: #14743closes: #14746
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Divide by zero with getmousepos() and 'smoothscroll'.
Solution: Don't compute skip_lines when width1 is zero.
(zeertzjq)
closes: #14747
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: [security] xxd: buffer-overflow with specific flags
Solution: Correctly calculate the required buffer space
(Lennard Hofmann)
xxd writes each output line into a global buffer before printing.
The maximum size of that buffer was not calculated correctly.
This command was crashing in AddressSanitizer:
$ xxd -Ralways -g1 -c256 -d -o 9223372036854775808 /etc/passwd
This prints a line of 6680 bytes but the buffer only had room for 6549 bytes.
If the output from "-b" was colored, the line could be even longer.
closes: #14738
Co-authored-by: K.Takata <kentkt@csc.jp>
Signed-off-by: Lennard Hofmann <lennard.hofmann@web.de>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: not able to import file from start dir
(Danielle McLean)
Solution: Allow to import from start directory
(Yegappan Lakshmanan)
fixes: #13313closes: #14740
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: zsh module files are not recognized
Solution: Detect '*.mdh' and '*.epro' as C filetype, '*.mdd' as zsh
filetype, determine zsh-modules '*.pro' from from it's content
(Wu, Zhenyu)
closes: #14737
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: confusing error message for unknown type
(Doug Kearns)
Solution: For an unknown type, display only the type name in the error
message (Yegappan Lakshmanan)
fixes: #13153closes: #14736
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: block_editing errors out when using del
(@Jamarley)
Solution: Change ins_len from size_t to int and
properly check that it doesn't become negative
There is a check in os.c that verifies that `ins_len` does not become
negative:
```
if (pre_textlen >= 0 && (ins_len = len - pre_textlen - offset) > 0)
```
However this only works, if ins_len can actually become negative and
unfortunately, ins_len has been declared as `size_t` so instead of
becoming negative it will wrap around and be very large.
So let's define it as integer, after which the condition above
properly catches this condition.
fixes: #14734closes: #14735
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: imported vars are not properly type checked
Solution: Check the imported variable type properly
(Yegappan Lakshmanan)
closes: #14729
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot get a list of positions describing a region
(Justin M. Keyes, after v9.1.0120)
Solution: Add the getregionpos() function
(Shougo Matsushita)
fixes: #14609closes: #14617
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Vim9 debug tests may be flaky
(Shane-XB-Qian)
Solution: Give a few more lines so that line-wrapping won't
cause a hit-enter prompt
The two tests Run_Test_debug_running_out_of_lines() and
Run_Test_debug_with_lambda() test debugging of Vim script functions.
Depending from what file-path the tests are run, it may cause
line wrapping to occur on the following output:
Entering Debug mode. Type "cont" to continue.
command line..script
/home/chrisbra/code/vim-upstream/src/testdir/XdebugFunc[15]..function
<SNR>9_Crash
and if the window is too small, this will cause a hit-enter prompt and so
the WaitForAssert() fails, causing failure of the following tests.
So increase the (internal) Vim window by a few more lines, so that even
if line-wrapping occurs, no hit-enter prompts happens and so the tests
can finish.
fixes: #14596closes: #14691
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: null value tests not sufficient
Solution: Add a more comprehensive test for null values
(Yegappan Lakshmanan)
closes: #14701
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: stylus files not recognized
Solution: Detect '*.styl' and '*.stylus' as stylus filetype,
include indent, filetype and syntax plugin
(Philip H)
closes: #14656
Signed-off-by: Philip H <47042125+pheiduck@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: vt420 terminfo entry may not be found
(Shane-XB-Qian)
Solution: check existence of terminfo vt420 and infocmp command
related: #14595closes: #14677
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: .out files recognized as tex files
Solution: Do not set an explicit filetype until it is clear what this
should be (shane.xb.qian)
closes: #14670
Signed-off-by: shane.xb.qian <shane.qian@foxmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Kbuild files are not recognized.
Solution: Detect Kbuild files as make files.
(Bruno Belanyi)
closes: #14676
Signed-off-by: Bruno Belanyi <bruno@belanyi.fr>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: cbuffer and similar quickfix and locationlist commands don't
accept a range, even so it is documented they should
(ilan-schemoul, after 8.1.1241)
Solution: Define ex commands with ADDR_LINES instead of ADDR_OTHER
fixes: #14638closes: #14657
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: There are a few typos
Solution: Fix them (zeertzjq)
closes: #14655
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: no comments allowed after class vars
(Christian Robinson, after 9.1.376)
Solution: Allow trailing comments after class vars
(Yegappan Lakshmanan)
closes: #14651
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: formatting text wrong when 'breakindent' is set
(Gary Johnson)
Solution: temporarily disable 'breakindent' option when formatting text,
so that the breakindent is not wrongly taken into account for
the line length
fixes: #14630closes: #14637
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When :edit an existing buffer, line('w$') may return a
wrong result.
Solution: Reset w_valid in curwin_init() (Jaehwang Jung)
`do_ecmd()` reinitializes the current window (`curwin_init()`) whose
`w_valid` field may have `VALID_BOTLINE` set. Resetting `w_botline`
without marking it as invalid makes subsequent `validate_botline()`
calls a no-op, thus resulting in wrong `line('w$')` value.
closes: #14642
Signed-off-by: Jaehwang Jung <tomtomjhj@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: problem when importing autoloaded scripts
Solution: In `:def` handle storing to vim9 autoload export
(Ernie Rael)
Problem occurs when `import autoload ./.../autoload/...`. The autoload
in the specified path causes the use of an autoload_prefix which combines
with the `import autoload` to create trouble.
In `generate_store_var()` `case dest_script` use ISN_STOREEXPORT,
when needed, instead of ISN_STORES. When executing ISN_STOREEXPORT,
check for autoload_prefix.
fixes: #14606closes: #14615
Signed-off-by: Ernie Rael <errael@raelity.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: compile_def_function is too long
Solution: Move out the code to compile the body of a function
(Yegappan Lakshmanan)
closes: #14622
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: ondir files are not recognized
Solution: Detect '.ondirrc' as ondir filetype
(Jon Parise)
closes: #14604
Signed-off-by: Jon Parise <jon@indelible.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Crash when typing many keys with D- modifier (after 9.1.0227).
Solution: Don't treat a 0x80 byte inside a special sequence as the start
of a special sequence (zeertzjq).
closes: #14613
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: test_vim9_builtin is a bit slow
Solution: source tests from a buffer instead of
writing and sourcing a file (Yegappan Lakshmanan)
closes: #14614
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
