Problem: Not enough tests for getregion() with multibyte chars.
Solution: Add a few more tests (zeertzjq).
closes: #14844
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Can't use a blockwise selection with a width for getregion().
Solution: Add support for blockwise selection with width like the return
value of getregtype() or the "regtype" value of TextYankPost
(zeertzjq).
closes: #14842
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: getregionpos() can't properly indicate positions beyond eol.
Solution: Add an "eol" flag that enables handling positions beyond end
of line like getpos() does (zeertzjq).
Also fix the problem that a position still has the coladd beyond the end
of the line when its column has been clamped. In the last test case
with TABs at the end of the line the old behavior is obviously wrong.
I decided to gate this behind a flag because returning positions that
don't correspond to actual characters in the line may lead to mistakes
for callers that want to calculate the length of the selected text, so
the behavior is only enabled if the caller wants it.
closes: #14838
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong yanking with exclusive selection and virtualedit=all,
and integer overflow when using getregion() on it.
Solution: Set coladd when decreasing column and 'virtualedit' is active.
Add more tests for getregion() with 'virtualedit' (zeertzjq).
closes: #14830
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: getregionpos() doesn't handle one char selection.
Solution: Handle startspaces differently when is_oneChar is set.
Also add a test for an exclusive charwise selection with
multibyte chars (zeertzjq)
closes: #14825
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: getregionpos() wrong with blockwise mode and multibyte.
Solution: Use textcol and textlen instead of start_vcol and end_vcol.
Handle coladd properly (zeertzjq).
Also remove unnecessary buflist_findnr() in add_regionpos_range(), as
getregionpos() has already switched buffer.
closes: #14805
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: block_editing errors out when using del
(@Jamarley)
Solution: Change ins_len from size_t to int and
properly check that it doesn't become negative
There is a check in os.c that verifies that `ins_len` does not become
negative:
```
if (pre_textlen >= 0 && (ins_len = len - pre_textlen - offset) > 0)
```
However this only works, if ins_len can actually become negative and
unfortunately, ins_len has been declared as `size_t` so instead of
becoming negative it will wrap around and be very large.
So let's define it as integer, after which the condition above
properly catches this condition.
fixes: #14734closes: #14735
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot get a list of positions describing a region
(Justin M. Keyes, after v9.1.0120)
Solution: Add the getregionpos() function
(Shougo Matsushita)
fixes: #14609closes: #14617
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Internal error with blockwise getregion() in another buffer
Solution: Also change curwin->w_buffer when changing curbuf (zeertzjq)
closes: #14179
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Internal error or crash when passing invalid position to
getregion().
Solution: Give an error for invalid position (zeertzjq).
closes: #14172
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: can only call getregion() for current buffer
Solution: Allow to retrieve selections from different buffers
(Shougo Matsushita)
closes: #14131
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: getregion() needs more tests
Solution: Run the getregion() test in both the legacy and Vim9 contexts
(Yegappan Lakshmanan)
closes: #14114
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: getregion() can be improved (after v9.1.120)
Solution: change getregion() implementation to use pos as lists and
one optional {opt} dictionary (Shougo Matsushita)
Note: The following is a breaking change!
Currently, the getregion() function (included as of patch v9.1.120) takes
3 arguments: the first 2 arguments are strings, describing a position,
arg3 is the type string.
However, that is slightly inflexible, there is no way to specify
additional arguments. So let's instead change the function signature to:
getregion(pos1, pos2 [, {Dict}]) where both pos1 and pos2 are lists.
This is slightly cleaner, and gives us the flexibility to specify
additional arguments as key/value pairs to the optional Dict arg.
Now it supports the "type" key to specify the selection type
(characterwise, blockwise or linewise) and now in addition one can also
define the selection type, independently of what the 'selection' option
actually is.
Technically, this is a breaking change, but since the getregion()
Vimscript function is still quite new, this should be fine.
closes: #14090
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Internal error when passing mark in another buffer to
getregion().
Solution: Don't allow marks in another buffer (zeertzjq)
closes: #14076
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Internal error when passing mark in another buffer to getregion()
Problem: hard to get visual region using Vim script
Solution: Add getregion() Vim script function
(Shougo Matsushita, Jakub Łuczyński)
closes: #13998closes: #11579
Co-authored-by: =?UTF-8?q?Jakub=20=C5=81uczy=C5=84ski?= <doubleloop@o2.pl>
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: upper-case of ß should be U+1E9E (CAPITAL LETTER SHARP S)
(fenuks)
Solution: Make gU, ~ and g~ convert the U+00DF LATIN SMALL LETTER SHARP S (ß)
to U+1E9E LATIN CAPITAL LETTER SHARP S (ẞ), update tests
(glepnir)
This is part of Unicode 5.1.0 from April 2008, so should be fairly safe
to use now and since 2017 is part of the German standard orthography,
according to Wikipedia:
https://en.wikipedia.org/wiki/Capital_%E1%BA%9E#cite_note-auto-12
There is however one exception: UnicodeData.txt for U+00DF
LATIN SMALL LETTER SHARP S does NOT define U+1E9E LATIN CAPITAL LETTER
SHARP S as its upper case version. Therefore, toupper() won't be able
to convert from lower sharp s to upper case sharp s (the other way
around however works, since U+00DF is considered the lower case
character of U+1E9E and therefore tolower() works correctly for the
upper case version).
fixes: #5573closes: #14018
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: ml_get: invalid lnum when :s replaces visual selection
(@ropery)
Solution: substitute may decrement the number of lines in a buffer,
so validate, that the bottom lines of the visual selection
stays within the max buffer line
fixes: #13890closes: #13892
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong cursor position when dragging out of window.
Solution: Don't use ScreenCols[] when mouse is not in current window.
closes: #13717
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: r_CTRL-C works differently in visual mode
Solution: Make r_CTRL-C behave consistent in visual mode
in terminal and Windows GUI
in visual mode, r CTRL-C behaves strange in Unix like environments. It
seems to end visual mode, but still is waiting for few more chars,
however it never seems to replace it by any characters and eventually
just returns back into normal mode.
In contrast in Windows GUI mode, r_CTRL-C replaces in the selected area
all characters by a literal CTRL-C.
Not sure why it behaves like this. It seems in the Windows GUI, got_int
is not set and therefore behaves as if any other normal character has
been pressed.
So remove the special casing of what happens when got_int is set and
make it always behave like in Windows GUI mode. Add a test to verify it
always behaves like replacing in the selected area each selected
character by a literal CTRL-C.
closes: #13091closes: #13112
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Visual highlight not working with cursor at end of screen line
and 'showbreak'.
Solution: Only update "vcol_prev" when drawing buffer text.
closes: #12865
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Cursor in wrong position with Visual substitute.
Solution: When restoring 'linebreak' mark the virtual column as invalid.
(closes#11309, closes#11311)
Problem: Put in Visual mode cannot be repeated.
Solution: Use "P" to put without yanking the deleted text into the unnamed
register. (Shougo Matsushita, closes#9591)
