Problem: A cmdlen == 0 condition is always true as ccline.cmdlen == 0
was already checked above (after v9.1.0766).
Solution: Remove the condition and the variable.
(zeertzjq)
closes: #15830
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: No test for patches 6.2.418 and 7.3.489
Solution: Add a test. Fix some whitespace problems in test_mapping.vim.
Document the behavior (zeertzjq).
closes: #15815
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Check that mapping rhs starts with lhs doesn't work if lhs is
not simplified.
Solution: Keep track of the mapblock containing the alternative lhs and
also compare with it (zeertzjq).
fixes: #15376closes: #15384
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Crash when typing many keys with D- modifier (after 9.1.0227).
Solution: Don't treat a 0x80 byte inside a special sequence as the start
of a special sequence (zeertzjq).
closes: #14613
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: No test that completing a partial mapping clears 'showcmd'.
Solution: Complete partial mappings in Test_showcmd_part_map() instead
of using :echo. Adjust some comments (zeertzjq).
closes: #14580
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: 'showcmd' is wrong for partial mapping with multibyte char,
and isn't very readable with modifyOtherKeys.
Solution: Decode multibyte char and merge modifiers into the char.
(zeertzjq)
This improves the following situations:
- Multibyte chars whose individual bytes are considered unprintable are
now shown properly in 'showcmd' area.
- Ctrl-W with modifyOtherKeys now shows ^W in 'showcmd' area.
The following situation may still need improvement:
- If the char is a special key or has modifiers that cannot be merged
into it, internal keycodes are shown in 'showcmd' area like before.
This applies to keys typed in Normal mode commands as well, and it's
hard to decide how to make it more readable due to the limited space
taken by 'showcmd', so I'll leave it for later.
closes: #14572
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot map Super Keys in GTK UI
(Casey Tucker)
Solution: Enable Super Key mappings in GTK using <D-Key>
(Casey Tucker)
As a developer who works in both Mac and Linux using the same keyboard,
it can be frustrating having to remember different key combinations or
having to rely on system utilities to remap keys.
This change allows `<D-z>` `<D-x>` `<D-c>` `<D-v>` etc. to be recognized
by the `map` commands, along with the `<D-S-...>` shifted variants.
```vimrc
if has('gui_gtk')
nnoremap <D-z> u
nnoremap <D-S-Z> <C-r>
vnoremap <D-x> "+d
vnoremap <D-c> "+y
cnoremap <D-v> <C-R>+
inoremap <D-v> <C-o>"+gP
nnoremap <D-v> "+P
vnoremap <D-v> "-d"+P
nnoremap <D-s> :w<CR>
inoremap <D-s> <C-o>:w<CR>
nnoremap <D-w> :q<CR>
nnoremap <D-q> :qa<CR>
nnoremap <D-t> :tabe<CR>
nnoremap <D-S-T> :vs#<CR><C-w>T
nnoremap <D-a> ggVG
vnoremap <D-a> <ESC>ggVG
inoremap <D-a> <ESC>ggVG
nnoremap <D-f> /
nnoremap <D-g> n
nnoremap <D-S-G> N
vnoremap <D-x> "+x
endif
```
closes: #12698
Signed-off-by: Casey Tucker <dctucker@hotmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
This is a collection of various PRs from github that all require a minor
patch number:
1) https://github.com/vim/vim/pull/12612
Do not conflate dictionary key with end of block
2) https://github.com/vim/vim/pull/12729:
When saving and restoring 'undolevels', the constructs `&undolevels` and
`:set undolevels` are problematic.
The construct `&undolevels` reads an unpredictable value; it will be the
local option value (if one has been set), or the global option value
(otherwise), making it unsuitable for saving a value for later
restoration.
Similarly, if a local option value has been set for 'undolevels',
temporarily modifying the option via `:set undolevels` changes the local
value as well as the global value, requiring extra work to restore both
values.
Saving and restoring the option value in one step via the construct
`:let &undolevels = &undolevels` appears to make no changes to the
'undolevels' option, but if a local option has been set to a different
value than the global option, it has the unintended effect of changing
the global 'undolevels' value to the local value.
Update the documentation to explain these issues and recommend explicit
use of global and local option values when saving and restoring. Update
some unit tests to use `g:undolevels`.
3) https://github.com/vim/vim/pull/12702:
Problem: Pip requirements files are not recognized.
Solution: Add a pattern to match pip requirements files.
4) https://github.com/vim/vim/pull/12688:
Add indent file and tests for ABB Rapid
5) https://github.com/vim/vim/pull/12668:
Use Lua 5.1 numeric escapes in tests and add to CI
Only Lua 5.2+ and LuaJIT understand hexadecimal escapes in strings. Lua
5.1 only supports decimal escapes:
> A character in a string can also be specified by its numerical value
> using the escape sequence \ddd, where ddd is a sequence of up to three
> decimal digits. (Note that if a numerical escape is to be followed by a
> digit, it must be expressed using exactly three digits.) Strings in Lua
> can contain any 8-bit value, including embedded zeros, which can be
> specified as '\0'.
To make sure this works with Lua 5.4 and Lua 5.1 change the Vim CI to
run with Lua 5.1 as well as Lua 5.4
6) https://github.com/vim/vim/pull/12631:
Add hurl filetype detection
7) https://github.com/vim/vim/pull/12573:
Problem: Files for haskell persistent library are not recognized
Solution: Add pattern persistentmodels for haskell persistent library
closes: #12612closes: #12729closes: #12702closes: #12688closes: #12668closes: #12631closes: #12573
Co-authored-by: lacygoill <lacygoill@lacygoill.me>
Co-authored-by: Michael Henry <drmikehenry@drmikehenry.com>
Co-authored-by: ObserverOfTime <chronobserver@disroot.org>
Co-authored-by: KnoP-01 <knosowski@graeffrobotics.de>
Co-authored-by: James McCoy <jamessan@jamessan.com>
Co-authored-by: Jacob Pfeifer <jacob@pfeifer.dev>
Co-authored-by: Borys Lykah <lykahb@fastmail.com>
Problem: Cannot detect whether modifyOtherKeys is enabled.
Solution: Use XTQMODKEYS introduced by xterm version 377 to request the
modifyOtherKeys level. Update the keycode check results.
Problem: repeating a <ScriptCmd> mapping does not use the right script
context.
Solution: When using a mapping put <SID>{sid}; in the redo buffer.
(closes#11049)
Problem: An error from an expression mapping messes up the display.
Solution: When the expression results in an empty string return K_IGNORE.
In cmdline mode redraw the command line. (closes#9726)
Problem: Vim9: finding global function without g: prefix but not finding
global variable is inconsistent.
Solution: Require using g: for a global function. Change the vim9.vim
script into a Vim9 script with exports. Fix that import in legacy
script does not work.
Problem: Deleting any mapping may cause <ScritpCmd> to not set the script
context.
Solution: Only reset last_used_map if it is the deleted mapping.
(closes#9568)
Problem: Using freed memory if an expression abbreviation deletes the
abbreviation.
Solution: Do not access the pointer after evaluating the expression.
Problem: Script context not restored after using <ScriptCmd>.
Solution: Also restore context when not in a script. (closes#9536)
Add the 'c' flag to feedkeys() to be able to test this.
Problem: Terminal test for current directory not used on FreeBSD.
Solution: Make it work on FreeBSD. (Ozaki Kiichi, closes#9516) Add
TermWait() inside Run_shell_in_terminal() as a generic solution.
