Problem: Vim9: no support for bitwise operators in lambda funcs
Solution: move "evaluate" assignment a bit up in order to decide
to perform bitwise operations
closes: #13342closes: #13345
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: no filetype detection for Debian sources
Solution: Add new deb822sources filetype
closes: #13320
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: James McCoy <jamessan@jamessan.com>
Problem: When clicking in the middle of a TAB, getmousepos() returns
the column of the next char instead of the TAB.
Solution: Break out of the loop when the vcol to find is inside current
char. Fix invalid memory access when calling virtcol2col() on
an empty line.
closes: #13321
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: complete_info() returns wrong index
Solution: Make order of 'info' in completion_info consistent
Start the iteration from the same point and follow the same direction as
done when assigning the completion numbers. This way we remove the
dependence on the completion direction and make the order of 'info'
consistent.
closes: #12230closes: #12971
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: linebreak applies for leading whitespace
Solution: only apply linebreak, once we have found non-breakat chars in
the line
closes: #13228closes: #13243
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: assignment operators don't work for class vars
Solution: implement it
closes: #13306
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: does not handle islocked() from a method correctly
Solution: Handle islocked() builtin from a method.
- Setup `lval_root` from `f_islocked()`.
- Add function `fill_exec_lval_root()` to get info about executing method.
- `sync_root` added in get_lval to handle method member access.
- Conservative approach to reference counting.
closes: #13309
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Vim9: error message can be more accurate
Solution: Fix the error messages
Fix message for some single use error messages.
closes: #13312
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: INI files not detected
Solution: detect uppercase .INI as dosini files
It previo~1 only worked for lower-case .ini files, but upperc~1 .INI is
also somewhat common on account of DOS' old 8.3 upperc~2 only filena~1.
closes: #13316
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Martin Tournoij <martin@arp242.net>
Problem: cmdline-completion for comma-separated options wrong
Solution: Fix command-line expansions for options with filenames with
commas
Fix command-line expansions for options with filenames with commas
Cmdline expansion for option values that take a comma-separated list
of file names is currently not handling file names with commas as the
commas are not escaped. For such options, the commas in file names need
to be escaped (to differentiate from a comma that delimit the list
items). The escaped comma is unescaped in `copy_option_part()` during
option parsing.
Fix as follows:
- Cmdline completion for option values with comma-separated file/folder
names will not start a new match when seeing `\\,` and will instead
consider it as one value.
- File/folder regex matching will strip the `\\` when seeing `\\,` to
make sure it can match the correct files/folders.
- The expanded value will escape `,` with `\\,`, similar to how spaces
are escaped to make sure the option value is correct on the cmdline.
This fix also takes into account the fact that Win32 Vim handles file
name escaping differently. Typing '\,' for a file name results in it
being handled literally but in other platforms '\,' is interpreted as a
simple ',' and commas need to be escaped using '\\,' instead.
Also, make sure this new logic only applies to comma-separated options
like 'path'. Non-list options like 'set makeprg=<Tab>' and regular ex
commands like `:edit <Tab>` do not require escaping and will continue to
work.
Also fix up documentation to be clearer. The original docs are slightly
misleading in how it discusses triple slashes for 'tags'.
closes: #13303
related: #13301
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: test: undofile left behind
Solution: cleanup undofile
fix: tmp file not deleted when running make test_undo
Temporary file `.Xtestfile.txt.un~` was left running `make test_undo`
and vim was configured with:
```
./configure --with-features=normal --enable-gui=no --enable-terminal
```
closes: #13304
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Dominique Pellé <dominique.pelle@tomtom.com>
Problem: Vim9: covariant parameter types allowed when assigning
functions
Solution: Enforce invariant type check for arguments and return value
when assigning a funcref
closes: #13299closes: #13305
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: need cleanup of class related interface code
Solution: Remove the unused class variable and class method related code
for interfaces.
Remove unused class variable and class method related code for
interfaces.
Refactor the code.
Optimize the object/class member double lookup in compile_lhs().
Change unused global functions to static functions.
closes: #13302
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: segfault with islocked()
Solution: Check that the lval pointer is not null for objects and
class variables
closes: #13295
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Vim9: use-after-free in deep call stack
Solution: Get the objct pointer from execution stack
closes: #13296
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: some error messages can be improved
Solution: Mention the defining class for variable access error message
closes: #13272
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: xxd: cannot reverse a bit dump
Solution: implement reversing the bit dump using -b -r
closes: #13286
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: tristhaus <tristhaus@yahoo.de>
Problem: no cmdline completion for setting the font
Solution: enable it on Win32 and GTK builds
Add guifont cmdline completion (for Windows and GTK)
For Windows, auto-complete will only suggest monospace fonts as that's
the only types allowed. Will also suggest font options after the colon,
including suggesting the current font size for convenience, and misc
charset and quality options like `cANSI` and `qCLEARTYPE`.
For GTK, auto-complete will suggest only monospace fonts for `guifont`
but will include all fonts for `guifontwide`. The completion code
doesn't currently suggest the current font size, as the GTK guifont
format does not have a clear delimiter (':' for other platforms).
closes: #13264
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Vim9: potential use-after-free for class members
Solution: Use the class-related grow array for storing the
member type instead of using a temporary type
list grow array
Use the type list grow array associated with the class than using a
temporary type list grow array to allocate the class member type.
For simple types, a predefined type is used. For complex types, the type
is dynamically allocated from a grow array. For class variables, the
type grow array in the class should be used. So that the lifetime of the
type is same as the lifetime of the class.
closes: #13279
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Scrolling non-current window using mouse is inconsistent
depending on 'scrollbind'/'scrolloff' and different from GUI
vertical scrollbar when 'cursorbind' is set.
Solution: Don't move cursor in non-current windows for 'cursorbind' if
cursor in the current window didn't move.
closes: #13219closes: #13210
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: vim9: clean up from v9.0.1955
Solution: Fix a few remaining issues, improve error message
- Use `cl_exec`, the executing class, to check permissions in `get_lval()`.
- Handle lockvar of script variable from class.
- Add 'in class "Xxx"' to e_cannot_access_private_variable_str.
closes: #13222
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Cannot scroll up in diff mode with many filler lines and zero
'scrolloff'.
Solution: Invalidate w_cline_row before calling comp_botline().
closes: #13256
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: No filetype detection for just files
Solution: Detect just files (*.just, justfile, etc)
closes: #13271
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: dundargoc <gocdundar@gmail.com>
Problem: Vim9: object members can change type
Solution: Check type during assignment to object/class var
closes: #13127closes: #13262
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Clean up cmdline option completion code
Solution: Fix various minor problems
- Fix manual array size calculations to just use `ARRAY_LENGTH()`.
- Fix unintentional typo in comments due to copy-paste error.
- Fix assert_equal() usages to pass the expected value to first
parameter instead of 2nd one to avoid confusion.
- Fix signed vs unsigned warnings
- Correct misplaced comments about set_op_T and set_prefix_T
and fix a typo in another comment
closes: #13249closes: #13237
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: win32: missing '**' expansion test (after v9.0.1947)
Solution: Add test for MS-Windows
win32: Add "**" test
Vim supports "**" on MS-Windows. However, it is not tested by
`Test_glob_extended_bash`.
Unlike Unix, it doesn't use 'shell' and doesn't support {,} expansion.
So, I added as a separate test.
related: #13205closes: #13250
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: buffer-overflow in trunc_string()
Solution: Add NULL at end of buffer
Currently trunc_string() assumes that when the string is too long,
buf[e-1] will always be writeable. But that assumption may not always be
true. The condition currently looks like this
else if (e + 3 < buflen)
[...]
else
{
// can't fit in the "...", just truncate it
buf[e - 1] = NUL;
}
but this means, we may run into the last else clause with e still being
larger than buflen. So a buffer overflow occurs.
So instead of using `buf[e - 1]`, let's just always
truncate at `buf[buflen - 1]` which should always be writable.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: cmdline completion should consider key option
Solution: Disable cmdline completion for key option, slightly
refactor how P_NO_CMD_EXPAND is handled
Harden crypto 'key' option: turn off cmdline completion, disable set-=
"set-=" can be used maliciously with a crypto key, as it allows an
attacker (who either has access to the computer or a plugin author) to
guess a substring by observing the modified state. Simply turn off
set+=/-=/^= for this option as there is no good reason for them to be
used.
Update docs to make that clear as well.
Also, don't allow cmdline completion for 'key' as it just shows *****
which is not useful and confusing to the user what it means (if the user
accidentally hits enter they will have replaced their key with "*****"
instead).
Move logic to better location, don't use above 32-bit for flags
Move P_NO_CMD_EXPAND to use the unused 0x20 instead of going above
32-bits, as currently the flags parameter is only 32-bits on some
systems. Left a comment to warn that future additions will need to
change how the flags work either by making it 64-bit or split into two
member vars.
Also, move the logic for detecting P_NO_CMD_EXPAND earlier so it's not
up to each handler to decide, and you won't see the temporary "..." that
Vim shows while waiting for completion handler to complete.
closes: #13224
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: xattr errors not translated
Solution: mark for translation, consistently capitalize
first letter.
closes: #13236
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Configure script may not detect xattr correctly
Solution: include sys/xattr instead of attr/xattr,
make Test_write_with_xattr_support() test
xattr feature correctly
This also applies to the Smack security feature, so change the include
and configure script for it as well.
closes: #13229
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: No support for writing extended attributes
Solution: Add extended attribute support for linux
It's been a long standing issue, that if you write a file with extended
attributes and backupcopy is set to no, the file will loose the extended
attributes.
So this patch adds support for retrieving the extended attributes and
copying it to the new file. It currently only works on linux, mainly
because I don't know the different APIs for other systems (BSD, MacOSX and
Solaris). On linux, this should be supported since Kernel 2.4 or
something, so this should be pretty safe to use now.
Enable the extended attribute support with normal builds.
I also added it explicitly to the :version output as well as make it
able to check using `:echo has("xattr")`, to have users easily check
that this is available.
In contrast to the similar support for SELINUX and SMACK support (which
also internally uses extended attributes), I have made this a FEAT_XATTR
define, instead of the similar HAVE_XATTR.
Add a test and change CI to include relevant packages so that CI can
test that extended attributes are correctly written.
closes: #306closes: #13203
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cmdline completion for 'listchars' fields doesn't include
"multispace" and "leadmultispace" (after 9.0.1958).
Solution: Include "multispace" and "leadmultispace" in lcstab.
closes: #13225
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Vim9: methods parameters and types are covariant
Solution: Support contra-variant type check for object method arguments
(similar to Dart).
closes: #12965closes: #13221
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: cannot complete option values
Solution: Add completion functions for several options
Add cmdline tab-completion for setting string options
Add tab-completion for setting string options on the cmdline using
`:set=` (along with `:set+=` and `:set-=`).
The existing tab completion for setting options currently only works
when nothing is typed yet, and it only fills in with the existing value,
e.g. when the user does `:set diffopt=<Tab>` it will be completed to
`set diffopt=internal,filler,closeoff` and nothing else. This isn't too
useful as a user usually wants auto-complete to suggest all the possible
values, such as 'iblank', or 'algorithm:patience'.
For set= and set+=, this adds a new optional callback function for each
option that can be invoked when doing completion. This allows for each
option to have control over how completion works. For example, in
'diffopt', it will suggest the default enumeration, but if `algorithm:`
is selected, it will further suggest different algorithm types like
'meyers' and 'patience'. When using set=, the existing option value will
be filled in as the first choice to preserve the existing behavior. When
using set+= this won't happen as it doesn't make sense.
For flag list options (e.g. 'mouse' and 'guioptions'), completion will
take into account existing typed values (and in the case of set+=, the
existing option value) to make sure it doesn't suggest duplicates.
For set-=, there is a new `ExpandSettingSubtract` function which will
handle flag list and comma-separated options smartly, by only suggesting
values that currently exist in the option.
Note that Vim has some existing code that adds special handling for
'filetype', 'syntax', and misc dir options like 'backupdir'. This change
preserves them as they already work, instead of converting to the new
callback API for each option.
closes: #13182
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: termcap options should change on keyprotocol setting
Solution: Apply termcap entries when 'keyprotocol' changes
When the 'keyprotocol' option was set after startup (including in a
user's .vimrc) the termcap entries associated with the matching protocol
were not applied. Thus, setting the option has no affect.
When 'keyprotocol' is changed it should also update the termcap entries.
closes: #13211
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: Custom cmdline completion skips original cmdline when pressing
Ctrl-P at first match if completion function invokes glob().
Solution: Move orig_save into struct expand_T.
closes: #13216
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Vim9: lockvar issues with objects/classes
Solution: fix `get_lhs()` object/class access and avoid `SEGV`,
make error messages more accurate.
- `get_lval()` detects/returns object/class access
- `compile_lock_unlock()` generate code for bare static and obj_arg access
- `do_lock_var()` check lval for `ll_object`/`ll_class` and fail if so.
Details:
- Add `ll_object`/`ll_class`/`ll_oi` to `lval_T`.
- Add `lockunlock_T` to `isn_T` for `is_arg` to specify handling of `lval_root` in `get_lval()`.
- In `get_lval()`, fill in `ll_object`/`ll_class`/`ll_oi` as needed; when no `[idx] or .key`, check lval_root on the way out.
- In `do_lock_var()` check for `ll_object`/`ll_class`; also bullet proof ll_dict case
and give `Dictionay required` if problem. (not needed to avoid lockvar crash anymore)
- In `compile_lock_unlock()` compile for the class variable and func arg cases.
closes: #13174
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Vim9: hard to debug vim9_class errors from CI
Solution: Include the line number in assert_xxx() calls. Include the
entire error message in the tests. Fix the indentation in the
test file. Add tags for new error codes.
closes: #13206
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: error codes spread out
Solution: group them together and reserve 100
more for future use
Reserve 100 error codes for future enhancements to the Vim9 class
support
closes: #13207
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
