Problem: Terminal scrollback doesn't shrink when reducing
'termwinscroll'
Solution: Check if option value was decreased (Milly).
closes: #15904
Signed-off-by: Milly <milly.ca@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: testing of options can be further improved
Solution: split the generated option test into test_options_all.vim,
add more test cases, save and restore values, fix use-after-free
closes: #15894
Signed-off-by: Milly <milly.ca@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: not enough tests for setting options
Solution: Add more comprehensive tests to test_options (Milly).
closes: #15856
Signed-off-by: Milly <milly.ca@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: 'shortmess' "F" flag doesn't work properly with 'autoread'
(after 9.1.0154)
Solution: Hide the file info message instead of the warning dialog
(zeertzjq)
closes: #14159closes: #14158
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Insufficient testing for 'delcombine'.
Solution: Add test for both Normal and Insert modes without Arabic.
(zeertzjq)
closes: #14086
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Keymap completion is not available
Solution: Add keymap completion (Doug Kearns)
Add keymap completion to the 'keymap' option, user commands and builtin
completion functions.
closes: #13692
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The options[] array is not sorted alphabetically.
Solution: Sort it alphabetically. Add a test. Avoid unnecessary loop
iterations in findoption().
closes: #13648
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: With 'smoothscroll' set, "w_skipcol" is not reset when unsetting 'wrap'.
Resulting in incorrect calculation of the cursor position.
Solution: Reset "w_skipcol" when unsetting 'wrap'.
fixes: #12970closes: #13439
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: A few remaining cmdline completion issues with C-E/Y
Solution: Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not
used at the end
Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not used at the end
A few places in the cmdline completion code only works properly when the
user hits Tab (or 'wildchar') at the end of the cmdline, even though
it's supposed to work even in the middle of the line.
For fuzzy search, `:e ++ff`, and `:set hl=`, fix completion code to make
sure to use `xp_pattern_len` instead of assuming the entire `xp_pattern`
is the search pattern (since it contains texts after the cursor).
Fix Ctrl-E / Ctrl-Y to not jump to the end when canceling/accepting a
wildmenu completion. Also, make them work even when not using
`set wildoptions+=pum` as there is no drawback to doing so.
(Related issue where this was brought up: #13331)
closes: #13362
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: [security] use-after-free with wildmenu
Solution: properly clean up the wildmenu when exiting
Fix wildchar/wildmenu/pum memory corruption with special wildchar's
Currently, using `wildchar=<Esc>` or `wildchar=<C-\>` can lead to a
memory corruption if using wildmenu+pum, or wrong states if only using
wildmenu. This is due to the code only using one single place inside the
cmdline process loop to perform wild menu clean up (by checking
`end_wildmenu`) but there are other odd situations where the loop could
have exited and we need a post-loop clean up just to be sure. If the
clean up was not done you would have a stale popup menu referring to
invalid memory, or if not using popup menu, incorrect status line (if
`laststatus=0`).
For example, if you hit `<Esc>` two times when it's wildchar, there's a
hard-coded behavior to exit command-line as a failsafe for user, and if
you hit `<C-\><C-\><C-N>` it will also exit command-line, but the clean
up code would not have hit because of specialized `<C-\>` handling.
Fix Ctrl-E / Ctrl-Y to not cancel/accept wildmenu if they are also
used for 'wildchar'/'wildcharm'. Currently they don't behave properly,
and also have potentially memory unsafe behavior as the logic is
currently not accounting for this situation and try to do both.
(Previous patch that addressed this: #11677)
Also, correctly document Escape key behavior (double-hit it to escape)
in wildchar docs as it's previously undocumented.
In addition, block known invalid chars to be set in `wildchar` option,
such as Ctrl-C and `<CR>`. This is just to make it clear to the user
they shouldn't be set, and is not required for this bug fix.
closes: #13361
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: cmdline-completion for comma-separated options wrong
Solution: Fix command-line expansions for options with filenames with
commas
Fix command-line expansions for options with filenames with commas
Cmdline expansion for option values that take a comma-separated list
of file names is currently not handling file names with commas as the
commas are not escaped. For such options, the commas in file names need
to be escaped (to differentiate from a comma that delimit the list
items). The escaped comma is unescaped in `copy_option_part()` during
option parsing.
Fix as follows:
- Cmdline completion for option values with comma-separated file/folder
names will not start a new match when seeing `\\,` and will instead
consider it as one value.
- File/folder regex matching will strip the `\\` when seeing `\\,` to
make sure it can match the correct files/folders.
- The expanded value will escape `,` with `\\,`, similar to how spaces
are escaped to make sure the option value is correct on the cmdline.
This fix also takes into account the fact that Win32 Vim handles file
name escaping differently. Typing '\,' for a file name results in it
being handled literally but in other platforms '\,' is interpreted as a
simple ',' and commas need to be escaped using '\\,' instead.
Also, make sure this new logic only applies to comma-separated options
like 'path'. Non-list options like 'set makeprg=<Tab>' and regular ex
commands like `:edit <Tab>` do not require escaping and will continue to
work.
Also fix up documentation to be clearer. The original docs are slightly
misleading in how it discusses triple slashes for 'tags'.
closes: #13303
related: #13301
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Clean up cmdline option completion code
Solution: Fix various minor problems
- Fix manual array size calculations to just use `ARRAY_LENGTH()`.
- Fix unintentional typo in comments due to copy-paste error.
- Fix assert_equal() usages to pass the expected value to first
parameter instead of 2nd one to avoid confusion.
- Fix signed vs unsigned warnings
- Correct misplaced comments about set_op_T and set_prefix_T
and fix a typo in another comment
closes: #13249closes: #13237
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: cmdline completion should consider key option
Solution: Disable cmdline completion for key option, slightly
refactor how P_NO_CMD_EXPAND is handled
Harden crypto 'key' option: turn off cmdline completion, disable set-=
"set-=" can be used maliciously with a crypto key, as it allows an
attacker (who either has access to the computer or a plugin author) to
guess a substring by observing the modified state. Simply turn off
set+=/-=/^= for this option as there is no good reason for them to be
used.
Update docs to make that clear as well.
Also, don't allow cmdline completion for 'key' as it just shows *****
which is not useful and confusing to the user what it means (if the user
accidentally hits enter they will have replaced their key with "*****"
instead).
Move logic to better location, don't use above 32-bit for flags
Move P_NO_CMD_EXPAND to use the unused 0x20 instead of going above
32-bits, as currently the flags parameter is only 32-bits on some
systems. Left a comment to warn that future additions will need to
change how the flags work either by making it 64-bit or split into two
member vars.
Also, move the logic for detecting P_NO_CMD_EXPAND earlier so it's not
up to each handler to decide, and you won't see the temporary "..." that
Vim shows while waiting for completion handler to complete.
closes: #13224
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Cmdline completion for 'listchars' fields doesn't include
"multispace" and "leadmultispace" (after 9.0.1958).
Solution: Include "multispace" and "leadmultispace" in lcstab.
closes: #13225
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: cannot complete option values
Solution: Add completion functions for several options
Add cmdline tab-completion for setting string options
Add tab-completion for setting string options on the cmdline using
`:set=` (along with `:set+=` and `:set-=`).
The existing tab completion for setting options currently only works
when nothing is typed yet, and it only fills in with the existing value,
e.g. when the user does `:set diffopt=<Tab>` it will be completed to
`set diffopt=internal,filler,closeoff` and nothing else. This isn't too
useful as a user usually wants auto-complete to suggest all the possible
values, such as 'iblank', or 'algorithm:patience'.
For set= and set+=, this adds a new optional callback function for each
option that can be invoked when doing completion. This allows for each
option to have control over how completion works. For example, in
'diffopt', it will suggest the default enumeration, but if `algorithm:`
is selected, it will further suggest different algorithm types like
'meyers' and 'patience'. When using set=, the existing option value will
be filled in as the first choice to preserve the existing behavior. When
using set+= this won't happen as it doesn't make sense.
For flag list options (e.g. 'mouse' and 'guioptions'), completion will
take into account existing typed values (and in the case of set+=, the
existing option value) to make sure it doesn't suggest duplicates.
For set-=, there is a new `ExpandSettingSubtract` function which will
handle flag list and comma-separated options smartly, by only suggesting
values that currently exist in the option.
Note that Vim has some existing code that adds special handling for
'filetype', 'syntax', and misc dir options like 'backupdir'. This change
preserves them as they already work, instead of converting to the new
callback API for each option.
closes: #13182
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: termcap options should change on keyprotocol setting
Solution: Apply termcap entries when 'keyprotocol' changes
When the 'keyprotocol' option was set after startup (including in a
user's .vimrc) the termcap entries associated with the matching protocol
were not applied. Thus, setting the option has no affect.
When 'keyprotocol' is changed it should also update the termcap entries.
closes: #13211
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: Problems when setting bin/paste option
Solution: When setting binary/paste, remember that this also affects
depending options, so that :verbose set returns the right
location.
Mention if depending options for 'binary' or 'paste' have been reset
indirectly. Add a test to verify it works.
Also noticed as small bug, that the global option value for expandtab
was not reset when paste option is set, so fix that while at it.
closes: #12837closes: #12879
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: sidescrolloff and scrolloff options work slightly
different than other global-local options
Solution: Make it behave consistent for all global-local options
It was noticed, that sidescrolloff and scrolloff options behave
differently in comparison to other global-local window options like
'listchars'
So make those two behave like other global-local options. Also add some
extra documentation for a few special local-window options.
Add a few tests to make sure all global-local window options behave
similar
closes: #12956closes: #12643
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Still some "else if" constructs for setting options.
Solution: Add a few more functions for handling options. (Yegappan
Lakshmanan, closes#12090)
Problem: Too many "else if" statements in handling options.
Solution: Add more functions for handling option changes. (Yegappan
Lakshmanan, closes#12060)
Problem: Fuzzy expansion of option names is not right.
Solution: Pass the fuzzy flag down the call chain. (Christian Brabandt,
closes#10380, closes#10318)
