Update runtime files. Add support for J.

runtime/doc/change.txt

@@ -1126,7 +1126,7 @@ less than one line (the small delete register is used then).  An exception is
 made for the delete operator with these movement commands: |%|, |(|, |)|, |`|,
 |/|, |?|, |n|, |N|, |{| and |}|.  Register "1 is always used then (this is Vi
 compatible).  The "- register is used as well if the delete is within a line.
-Note that these character may be mapped.  E.g. |%| is mapped by the matchit
+Note that these characters may be mapped.  E.g. |%| is mapped by the matchit
 plugin.
    With each successive deletion or change, Vim shifts the previous contents
 of register 1 into register 2, 2 into 3, and so forth, losing the previous

runtime/doc/diff.txt

@@ -1,4 +1,4 @@
-*diff.txt*      For Vim version 7.4.  Last change: 2013 Jul 07
+*diff.txt*      For Vim version 7.4.  Last change: 2013 Sep 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -123,10 +123,14 @@ Since the option values are remembered with the buffer, you can edit another
 file for a moment and come back to the same file and be in diff mode again.
 
 							*:diffo* *:diffoff*
-:diffo[ff]	Switch off diff mode for the current window.
+:diffo[ff]	Switch off diff mode for the current window.  Resets related
+		options also when 'diff' was not set.
 
 :diffo[ff]!	Switch off diff mode for the current window and in all windows
-		in the current tab page where 'diff' is set.
+		in the current tab page where 'diff' is set.  Resetting
+		related options only happens in a window that has 'diff' set,
+		if the current window does not have 'diff' set then no options
+		in it are changed.
 
 The ":diffoff" command resets the relevant options to the values they had when
 using |:diffsplit|, |:diffpatch| , |:diffthis|. or starting Vim in diff mode.

runtime/doc/indent.txt

@@ -581,8 +581,8 @@ CLOJURE					*ft-clojure-indent* *clojure-indent*
 
 Clojure indentation differs somewhat from traditional Lisps, due in part to
 the use of square and curly brackets, and otherwise by community convention.
-These conventions are not always universally followed, so the Clojure indent
-script offers a few configurable options, listed below.
+These conventions are not universally followed, so the Clojure indent script
+offers a few configurable options, listed below.
 
 If the current vim does not include searchpairpos(), the indent script falls
 back to normal 'lisp' indenting, and the following options are ignored.

runtime/doc/pi_vimball.txt

@@ -188,7 +188,7 @@ WINDOWS							*vimball-windows*
 			  * Changed silent! to sil! (shorter)
 			  * Safed |'swf'| setting (during vimball extraction,
 			    its now turned off)
-	32 : May 19, 2010 * (Christian Brabrandt) :so someplugin.vba and
+	32 : May 19, 2010 * (Christian Brabandt) :so someplugin.vba and
 			    :so someplugin.vba.gz (and the other supported
 			    compression types) now works
 			  * (Jan Steffens) added support for xz compression

runtime/doc/todo.txt

@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 7.4.  Last change: 2013 Sep 05
+*todo.txt*      For Vim version 7.4.  Last change: 2013 Sep 22
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -36,23 +36,47 @@ not be repeated below, unless there is extra information.
 
 NFA engine mismatch, with example. (ZyX, 2013 Aug 29)
 
-php syntax file update. (Jason Woofenden, Aug 30)
+NFA engine difference, with test case. (Axel Bender, 2013 Sep 17)
+Comments from Vlad Irnov Sep 18.
 
 Problem positioning the cursor after auto-formatting without a comment. (Tor
 Perkins, 2013 Sep 1)
 
+Patch to fix test 92 and 93 failing in a bad way. (Hirohito Higashi, 2013 Sep
+11)
+
+Patch to fix using "p" in Visual block mode. (Christian Brabandt, 2013 Sep 19)
+
+Using \1 in pattern goes one line too far. (Bohr Shaw, 2013 Sep 5)
+Column is OK.  "/\v(^.+\n)\1/e" (John Little, Sep 5)
+Also, matches start of 2nd line, not the whole line.
+
+Error for incomplete help argument. (John Beckett, 2013 Sep 12)
+
 Popup menu: first item is not selected when typing more than one character?
 
 Patch to add async functionality. (Geoff Greer, 2013 Sep 1)
 
 Patch to avoid mouse cursor flickering. (Ken Takata,, 2013 Sep 2)
 
+Patch to make zg and zb work better. (Christian Brabandt, 2013 Sep 8)
+
+Patch to fix that VC10 does not stat() a symlink to a directory.
+(Ken Takata,, 2013 Sep 20)  Update Sep 21
+
 Should win_redr_custom() not be allowed to use recursively?
 (Yasuhiro Matsumoto, 2013 Aug 15)
 
 NFA engine combining character mismatch. (glts, 2013 Aug 27)
 Remark Dominique, Aug 27
 
+Patch to make Tcl 8.6 work. (Issue 167)
+
+Patch to make input() work while inside :normal. (Yasuhiro Matsumoto, 2013 Sep
+19)
+
+Problem using ":try" inside ":execute". (ZyX, 2013 Sep 15)
+
 Issue 164: freeze on regexp search.
 
 Python: ":py raw_input('prompt')" doesn't work. (Manu Hack)
@@ -61,7 +85,7 @@ Patch to fix substitute prompt with line number. (Benoit Pierre, 2013 Aug 27,
 third message)
 
 Patch to avoid problem with colon in file name. (Yasuhiro Matsumoto, 2013 Sep
-5) Only copy file name when needed.
+5) Only copy file name when needed: Sep 9.
 
 Include systemverilog file?  Two votes yes.
 
@@ -69,6 +93,10 @@ Wrapping around end of file does not work for "." after "cgn".  (Dimitar
 Dimitrov)
 Patch by Christian Brabandt, 2013 Aug 22
 
+Clang error for integer overflow. (Dominique Pelle, 2013 Sep 21)
+
+Patch to add v:hlsearch. (ZyX, 2013 Sep 22)
+
 Problem with 'spellsuggest' file, only works for some words.
 (Cesar Romani, 2013 Aug 20)  Depends on file name? (Aug 24)
 Additional remark by glts: the suggested words are marked bad?
@@ -83,6 +111,11 @@ Patch to make has() check for Vim version and patch at the same time.
 Several syntax file match "^\s*" which may get underlined if that's in the
 highlight group.  Add a "\zs" after it?
 
+Win32: When a directory name contains an exclamation mark, completion doesn't
+complete the contents of the directory.  No escaping for the "!"? (Jan
+Stocker, 2012 Jan 5; 2013 Aug 20)
+Patch 2013 Sept 10, test: Sept 11.
+
 Go through more coverity reports.
 
 With "$" in 'cpoptions' the popup menu isn't fully drawn. (Matti Niemenmaa,
@@ -99,7 +132,7 @@ Patches to fix this. (Ken Takata, 2013 Aug 9)
 :help gives example for z?, but it does not work.  m? and t? do work.
 
 Patch to add funcref to Lua.  (Luis Carvalho, 2013 Sep 4)
-Missing tests.
+With tests: Sep 5.
 
 Discussion about canonicalization of Hebrew. (Ron Aaron, 2011 April 10)
 
@@ -131,10 +164,6 @@ Works OK for echo, just not for  ":call" and ":call call()". (Ted, 2011 Mar
 Patch by Christian Brabandt, 2013 Mar 23.
 Not 100% sure this is the right solution.
 
-Win32: When a directory name contains an exclamation mark, completion doesn't
-complete the contents of the directory.  No escaping for the "!"? (Jan
-Stocker, 2012 Jan 5; 2013 Aug 20)
-
 Patch to support expression argument to sort() instead of a function name.
 Yasuhiro Matsumoto, 2013 May 31.
 Or should we add a more general mechanism, like lambda functions?
@@ -184,6 +213,7 @@ Patch to make fold updates much faster. (Christian Brabandt, 2012 Dec)
 
 TCL: With MSVC 2010 doesn't find Tcl_FindExecutable. (tux)
 Patch to define it. (Ken Takata, 2013 Aug 12)  Is this right?
+Probably not: http://code.google.com/p/vim/issues/detail?id=167
 
 MS-Windows: Patch to make tests copy files to avoid changing the fileformat of
 the files under version control. (Taro Muraoka, 2013 Jul 5)
@@ -992,8 +1022,6 @@ Also: swap files are in ~/tmp/  One has relative file name ".mozilla/...".
 Add v:motion_force. (Kana Natsuno, 2008 Dec 6)
 Maybe call it v:motiontype.
 
-Runtime files for Clojure. (Toralf Wittner, 2008 Jun 25)
-
 MS-Windows: editing the first, empty buffer, 'ffs' set to "unix,dos", ":enew"
 doesn't set 'ff' to "unix".  (Ben Fritz, 2008 Dec 5) Reusing the old buffer
 probably causes this.

runtime/doc/undo.txt

@@ -1,4 +1,4 @@
-*undo.txt*      For Vim version 7.4.  Last change: 2013 Aug 22
+*undo.txt*      For Vim version 7.4.  Last change: 2013 Sep 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -249,8 +249,9 @@ a simple scheme that maps filesystem paths directly to undo files. Vim will
 detect if an undo file is no longer synchronized with the file it was written
 for (with a hash of the file contents) and ignore it when the file was changed
 after the undo file was written, to prevent corruption.  An undo file is also
-ignored if its owner differs from the owner of the edited file.  Set 'verbose'
-to get a message about that when opening a file.
+ignored if its owner differs from the owner of the edited file, except when
+the owner of the undo file is the current user.  Set 'verbose' to get a
+message about that when opening a file.
 
 Undo files are normally saved in the same directory as the file.  This can be
 changed with the 'undodir' option.

runtime/doc/usr_45.txt

@@ -328,8 +328,8 @@ actually use Vim to convert a file.  Example: >
 *45.5*	Entering language text
 
 Computer keyboards don't have much more than a hundred keys.  Some languages
-have thousands of characters, Unicode has ten thousands.  So how do you type
-these characters?
+have thousands of characters, Unicode has over hundred thousand.  So how do
+you type these characters?
    First of all, when you don't use too many of the special characters, you
 can use digraphs.  This was already explained in |24.9|.
    When you use a language that uses many more characters than keys on your

runtime/doc/version5.txt

@@ -2020,7 +2020,7 @@ File browser added					*file-browser-5.2*
 
 The Win32, Athena and Motif GUI bring up a file requester if the user asks to
 ":browse" for the ":e", ":w", ":r", ":so", ":redirect" and
-":mkexrc/vimrc/vsess" commands.  ::browse e /foo/bar" opens the requester in
+":mkexrc/vimrc/vsess" commands.  ":browse e /foo/bar" opens the requester in
 the /foo/bar directory, so you can have nice mapping rhs's like ":browse so
 $vim/macros".  If no initial dir specified for ":browse e", can be compiled to
 either begin in the current directory, or that of the current buffer. (Negri

runtime/doc/version7.txt

@@ -2395,7 +2395,7 @@ with special attributes were redrawn.  Now only do this for characters that
 actually are bold.  Speeds up displaying considerably.
 
 When only highlighting changes and the text is scrolled at the same time
-everything is redraw instead of using a scroll and updating the changed text.
+everything is redrawn instead of using a scroll and updating the changed text.
 E.g., when using ":match" to highlight a paren that the cursor landed on.
 Added SOME_VALID: Redraw the whole window but also try to scroll to minimize
 redrawing.