Bharat Mediratta
190d7aaa55
Remove debug code.
2009-09-10 21:12:15 -07:00
Bharat Mediratta
b8053c9ddf
Rename "after_installer" to "welcome_message" in the code to make it
...
clearer what its purpose is. Add some spacing in the theme for it
so that it's less cramped.
2009-09-10 21:10:20 -07:00
Bharat Mediratta
752c857116
Rename ORM_MPTT::is_descendant() to ORM_MPTT::contains() to make the
...
API a little clearer. Write a test for it, too.
2009-09-10 10:28:43 -07:00
Bharat Mediratta
b550a06045
Rename $album to $target in move_to()
2009-09-10 10:08:29 -07:00
Tim Almdal
2bbe162339
A better fix for #741... the original problem was that the source and album variables were reversed
2009-09-10 10:09:09 -07:00
Tim Almdal
bea89be268
If the current drop target is not defined, in that we have moved out of the range of the current li elements, then assume the drop is occurring at the end of the list items. Fixes #742
2009-09-10 07:59:29 -07:00
Tim Almdal
eb345cb870
Changed the check in organize_Controller::move_to:
...
1) check that target and source are not the same.
2) check that the source is not already a child of the target (use to be a
descendant) Fixes #741 .
2009-09-10 06:17:21 -07:00
Bharat Mediratta
6e65a8208f
Fix a thinko-- of course we want urls to be the path to the file itself.
2009-09-08 21:52:15 -07:00
Bharat Mediratta
0df4b7d705
Fix line > 100 chars.
2009-09-08 21:49:28 -07:00
Bharat Mediratta
77bd3d3d40
Replace two preg_replace() calls with a single trim() call.
2009-09-08 21:49:09 -07:00
Bharat Mediratta
0709f7526d
Change $this->_photo to just $photo
2009-09-08 21:33:45 -07:00
Bharat Mediratta
5d76a73596
Fix test to support new slug code.
2009-09-08 21:32:21 -07:00
Bharat Mediratta
2ca20e8ab1
Check for subscribers *before* going through the process of creating
...
and rendering the email message. Fixes ticket #724 .
2009-09-08 21:19:00 -07:00
Bharat Mediratta
3bd8be2651
Change the relative_path_cache and relative_url_cache columns to store
...
urlencoded data for ease of use when we're dealing with the data.
This fixes ticket #569 by not allowing the urls that we put into our
RSS feeds to have bad characters in them.
We have to convert a path like var/albums/foo/"quotes"/bar.jpg into
something like var/albums/foo/%22quotes%22/bar.jpg. If we take the
approach of storing native data in the cache, then we have to explode
the path, urlencode the bits, and implode it again to avoid escaping
the / char. By storing it escaped, we avoid this problem. I believe
(but have not tested) that this is more efficient.
2009-09-08 21:02:45 -07:00
Bharat Mediratta
6cfcab2a5e
Amend the v12 installer to empty out the relative_url_cache and
...
relative_path_cache columns.
2009-09-08 20:59:39 -07:00
Bharat Mediratta
48becbe017
Update item::convert_filename_to_slug() to eliminate leading and
...
trailing hyphens.
2009-09-08 20:03:55 -07:00
Bharat Mediratta
453fb76443
Actually use the slug when creating new albums (instead of just converting the
...
filename over).
2009-09-08 20:00:04 -07:00
Bharat Mediratta
f69dee8841
Trim leading and trailing hyphens from the slug.
2009-09-08 19:58:27 -07:00
Bharat Mediratta
df85f43aa1
Remove unused $feed->link.
2009-09-08 17:05:38 -07:00
Bharat Mediratta
cf0c8b6319
Minor tweaks to the url refactor.
2009-09-08 17:01:59 -07:00
Bharat Mediratta
2aad580f53
Move specialized (pretty) url generation back into Item_Model so that
...
we're not relying on overriding url::site() to do tricks around item
urls. This means that you won't get item urls by doing
url::site("albums/37"), for example, but it also means that we won't
get pretty urls where we don't expect them (like in the action of a
<form> element).
Incidentally, this will help us move over to using the slug format
because if you've got a bad character in a url, the edit forms will
now work on it since they'll be id based.
2009-09-08 13:44:52 -07:00
Bharat Mediratta
6084848088
Improve comment.
2009-09-08 10:20:06 -07:00
Bharat Mediratta
714a82d1e0
Automagically generate pretty urls for movies, too.
2009-09-07 21:49:19 -07:00
Bharat Mediratta
7889ae1085
Fix a bug where we were not properly decoding the path in the fallback
...
code in get_item_from_uri() by using relative_url() instead of
relative_path().
2009-09-07 21:33:00 -07:00
Bharat Mediratta
86f88769f9
Update Item_Model::save() to consider the relative_xxx_cache fields as
...
insignificant, in addition to the view_count field. This means that
we won't trigger an event, nor will we adjust the updated field if
*only* those fields are changed.
2009-09-07 21:30:48 -07:00
Bharat Mediratta
78a42d9b83
1. Actually set the slug to the new value in the controllers.
...
2. Fix up an issue where we were crashing if there were no conflicting rows
3. Amend Item_Model so that if you change the slug, it flushes the cache
for all children
2009-09-07 21:09:52 -07:00
Bharat Mediratta
f28353f4e1
Add the 'Internet Address' field to all items, along with proper
...
validation for the fields.
2009-09-07 21:01:51 -07:00
Bharat Mediratta
dccfce4c00
Correct a mental mistake in the prior change. All the xxx_url()
...
methods actually refer to the url to the file on disk, not the logical
item. That's relative_url(). Perhaps some API renaming is in order?
2009-09-07 21:00:52 -07:00
Bharat Mediratta
a73b5e8226
Switch to using Item_Model::relative_url() for the url path.
2009-09-07 20:59:42 -07:00
Bharat Mediratta
83ebc2e2b0
Remove unused item::validate_no_name_conflict() and a debug line.
2009-09-07 20:59:11 -07:00
Bharat Mediratta
2f666f4c52
Add item::validate_url_safe() with a test.
2009-09-07 20:07:37 -07:00
Bharat Mediratta
6bc2235b27
Populate the slug field from the title as well.
2009-09-07 16:29:51 -07:00
Bharat Mediratta
795675e2b5
Add the slug to album, photo, and movie forms.
2009-09-07 16:21:58 -07:00
Bharat Mediratta
991bb0c063
Update golden file.
2009-09-07 16:21:58 -07:00
Bharat Mediratta
3f997562de
Add support for a per-item "slug" which will be the user-visible url
...
component for that given item. Album hierarchies are represented by
nested slugs. By default, we convert the filename to a slug when you
create an album, photo or movie.
2009-09-07 15:42:08 -07:00
Bharat Mediratta
68a78f7cce
Quiet down ffmpeg in movie::extract_frame()
2009-09-07 15:34:01 -07:00
Bharat Mediratta
14ba8505cc
Don't allow users to take away their own edit permissions. If we
...
detect that they did, just give it back. There's no visible message
in that case.
2009-09-06 11:45:41 -07:00
Bharat Mediratta
6c60310522
Don't show clickable link for breadcrumb items where the user doesn't
...
have edit permissions.
2009-09-06 11:34:51 -07:00
Bharat Mediratta
ac8c9d6670
Fix indentation.
2009-09-06 11:26:20 -07:00
Bharat Mediratta
d8f5b0f5a3
Change click() to change() so that we immediately update the UI when
...
the user picks a new option.
2009-09-05 21:14:25 -07:00
Andy Staudacher
b3d0cb5a4c
Bugfixes for locales::locale_from_http_request(), and adding tests.
...
(And the tests should illustrate that kohana 2.4's API doesn't quite fit our purpose of simply getting the best match between the accepted (client) and the installed (g3) locales.)
2009-09-05 18:55:44 -07:00
Andy Staudacher
b01596c0f0
Update XSS test golden data file.
2009-09-05 18:19:13 -07:00
Andy Staudacher
beb232a1cc
Revert previous edit. Prefer « none » (sweet, nice Unicode characters) instead of HTML entities.
2009-09-05 17:43:47 -07:00
Andy Staudacher
047196b23c
Add missing view for language selection
2009-09-05 17:39:49 -07:00
Bharat Mediratta
9fbdcf3efd
Change the module installer so that you don't need to provide your own
...
install() function if all you're going to do is to set the version of
the module from module.info into the database. This means that for some
simple modules, you don't need an install.php file at all.
2009-09-05 13:39:30 -07:00
Bharat Mediratta
ab7323d17b
Fix the url in the call to get subsequent entries to have the right
...
url, and to be json. Fixes #719 , which I introduced in my refactor.
2009-09-04 21:27:23 -07:00
Bharat Mediratta
add134cc75
placeholder for a missing view
2009-09-04 20:29:12 -07:00
Bharat Mediratta
a25640f9b2
Shorten the name in the block so that it doesn't wrap.
...
Use « and » in the << none >> text.
2009-09-04 20:28:46 -07:00
Bharat Mediratta
49de9bba68
Add @todo to replace locales::locale_from_http_request()
...
request::accepts_language() when we upgrade to Kohana 2.4
2009-09-04 20:19:15 -07:00
Andy Staudacher
f63766556a
XSS test golden data file update
2009-09-04 11:20:02 -07:00