scrape/ubitx-v5x
1
0
Fork 0
Code Issues 10 Pull Requests Projects Releases Wiki Activity

beta 0.25 commit

Browse Source
This commit is contained in:
phdlee
2018-01-10 11:34:15 +09:00
parent 8176b50f48
commit f563e74a4e
7 changed files with 2044 additions and 420 deletions
Download Patch File Download Diff File Expand all files Collapse all files

428
ubitx_20/ubitx_20.ino
View File

@@ -96,6 +96,8 @@
#include <LiquidCrystal.h>
LiquidCrystal lcd(8,9,10,11,12,13);
#define VERSION_NUM 0x01 //for KD8CEC'S firmware and for memory management software
/**
* The Arduino, unlike C/C++ on a regular computer with gigabytes of RAM, has very little memory.
* We have to be very careful with variables that are declared inside the functions as they are
@@ -141,6 +143,26 @@ int count = 0; //to generally count ticks, loops, etc
#define CW_SIDETONE 24
#define CW_SPEED 28
//AT328 has 1KBytes EEPROM
#define VFO_A_MODE 256
#define VFO_B_MODE 257
#define CW_DELAY 258
#define CW_START 259
//
#define VERSION_ADDRESS 779 //check Firmware version
//USER INFORMATION
#define USER_CALLSIGN_KEY 780 //0x59
#define USER_CALLSIGN_LEN 781 //1BYTE (OPTION + LENGTH) + CALLSIGN (MAXIMUM 18)
#define USER_CALLSIGN_DAT 782 //CALL SIGN DATA //direct EEPROM to LCD basic offset
//AUTO KEY STRUCTURE
//AUTO KEY USE 800 ~ 1023
#define CW_AUTO_MAGIC_KEY 800 //0x73
#define CW_AUTO_COUNT 801 //0 ~ 255
#define CW_AUTO_DATA 803 //[INDEX, INDEX, INDEX,DATA,DATA, DATA (Positon offset is CW_AUTO_DATA
#define CW_DATA_OFSTADJ CW_AUTO_DATA - USER_CALLSIGN_DAT //offset adjust for ditect eeprom to lcd (basic offset is USER_CALLSIGN_DAT
#define CW_STATION_LEN 1023 //value range : 4 ~ 30
/**
* The uBITX is an upconnversion transceiver. The first IF is at 45 MHz.
* The first IF frequency is not exactly at 45 Mhz but about 5 khz lower,
@@ -168,6 +190,10 @@ int count = 0; //to generally count ticks, loops, etc
#define LOWEST_FREQ (3000000l)
#define HIGHEST_FREQ (30000000l)
//When the frequency is moved by the dial, the maximum value by KD8CEC
#define LOWEST_FREQ_DIAL (3000l)
#define HIGHEST_FREQ_DIAL (60000000l)
//we directly generate the CW by programmin the Si5351 to the cw tx frequency, hence, both are different modes
//these are the parameter passed to startTx
#define TX_SSB 0
@@ -177,11 +203,47 @@ char ritOn = 0;
char vfoActive = VFO_A;
int8_t meter_reading = 0; // a -1 on meter makes it invisible
unsigned long vfoA=7150000L, vfoB=14200000L, sideTone=800, usbCarrier;
unsigned long vfoA_eeprom, vfoB_eeprom; //for protect eeprom life
unsigned long frequency, ritRxFrequency, ritTxFrequency; //frequency is the current frequency on the dial
int cwSpeed = 100; //this is actuall the dot period in milliseconds
extern int32_t calibration;
//for store the mode in eeprom
byte vfoA_mode=0, vfoB_mode = 0; //0: default, 1:not use, 2:LSB, 3:USB, 4:CW, 5:AM, 6:FM
byte vfoA_mode_eeprom, vfoB_mode_eeprom; //for protect eeprom life
//KD8CEC
//for AutoSave and protect eeprom life
byte saveIntervalSec = 10; //second
unsigned long saveCheckTime = 0;
unsigned long saveCheckFreq = 0;
bool isSplitOn = false;
byte cwDelayTime = 60;
byte delayBeforeCWStartTime = 50;
//sideTonePitch + sideToneSub = sideTone
byte sideTonePitch=0;
byte sideToneSub = 0;
//DialLock
byte isDialLock = 0;
byte isTxOff = 0;
//Variables for auto cw mode
byte isCWAutoMode = 0; //0 : none, 1 : CW_AutoMode_Menu_Selection, 2 : CW_AutoMode Sending
byte cwAutoTextCount = 0; //cwAutoText Count
byte beforeCWTextIndex = 255; //when auto cw start, always beforeCWTextIndex = 255, (for first time check)
byte cwAutoDialType = 0; //0 : CW Text Change, 1 : Frequency Tune
#define AUTO_CW_RESERVE_MAX 3
byte autoCWSendReserv[AUTO_CW_RESERVE_MAX]; //Reserve CW Auto Send
byte autoCWSendReservCount = 0; //Reserve CW Text Cound
byte sendingCWTextIndex = 0; //cw auto seding Text Index
byte userCallsignLength = 0; //7 : display callsign at system startup, 6~0 : callsign length (range : 1~18)
/**
* Raduino needs to keep track of current state of the transceiver. These are a few variables that do it
*/
@@ -202,6 +264,41 @@ boolean modeCalibrate = false;//this mode of menus shows extended menus to calib
* you start hacking around
*/
/*
KD8CEC
When using the basic delay of the Arduino, the program freezes.
When the delay is used, the program will generate an error because it is not communicating,
so Create a new delay function that can do background processing.
*/
unsigned long delayBeforeTime = 0;
byte delay_background(unsigned delayTime, byte fromType){ //fromType : 4 autoCWKey -> Check Paddle
delayBeforeTime = millis();
while (millis() <= delayBeforeTime + delayTime) {
if (fromType == 4)
{
//CHECK PADDLE
if (getPaddle() != 0) //Interrupt : Stop cw Auto mode by Paddle -> Change Auto to Manual
return 1;
//Check PTT while auto Sending
autoSendPTTCheck();
Check_Cat(3);
}
else
{
//Background Work
Check_Cat(fromType);
}
}
return 0;
}
/**
* Select the properly tx harmonic filters
* The four harmonic filters use only three relays
@@ -257,7 +354,10 @@ void setTXFilters(unsigned long freq){
void setFrequency(unsigned long f){
uint64_t osc_f;
//1 digits discarded
f = (f / 50) * 50;
setTXFilters(f);
if (isUSB){
@@ -278,9 +378,12 @@ void setFrequency(unsigned long f){
* Note: In cw mode, doesnt key the radio, only puts it in tx mode
*/
void startTx(byte txMode){
unsigned long tx_freq = 0;
digitalWrite(TX_RX, 1);
void startTx(byte txMode, byte isDisplayUpdate){
unsigned long tx_freq = 0;
if (isTxOff != 1)
digitalWrite(TX_RX, 1);
inTx = 1;
if (ritOn){
@@ -302,7 +405,10 @@ void startTx(byte txMode){
else
si5351bx_setfreq(2, frequency - sideTone);
}
updateDisplay();
//reduce latency time when begin of CW mode
if (isDisplayUpdate == 1)
updateDisplay();
}
void stopTx(){
@@ -355,7 +461,7 @@ void checkPTT(){
return;
if (digitalRead(PTT) == 0 && inTx == 0){
startTx(TX_SSB);
startTx(TX_SSB, 1);
delay(50); //debounce the PTT
}
@@ -374,9 +480,12 @@ void checkButton(){
return;
doMenu();
//wait for the button to go up again
while(btnDown())
while(btnDown()) {
delay(10);
Check_Cat(0);
}
delay(50);//debounce
}
@@ -389,33 +498,46 @@ void checkButton(){
*/
void doTuning(){
int s;
int s = 0;
unsigned long prev_freq;
int incdecValue = 0;
if (isDialLock == 1)
return;
if (isCWAutoMode == 0 || cwAutoDialType == 1)
s = enc_read();
s = enc_read();
if (s){
prev_freq = frequency;
if (s > 10)
frequency += 200000l;
incdecValue = 200000l;
if (s > 7)
frequency += 10000l;
incdecValue = 10000l;
else if (s > 4)
frequency += 1000l;
incdecValue = 1000l;
else if (s > 2)
frequency += 500;
incdecValue = 500;
else if (s > 0)
frequency += 50l;
incdecValue = 50l;
else if (s > -2)
frequency -= 50l;
incdecValue = -50l;
else if (s > -4)
frequency -= 500l;
incdecValue = -500l;
else if (s > -7)
frequency -= 1000l;
incdecValue = -1000l;
else if (s > -9)
frequency -= 10000l;
incdecValue = -10000l;
else
frequency -= 200000l;
incdecValue = -200000l;
if (incdecValue > 0 && frequency + incdecValue > HIGHEST_FREQ_DIAL)
frequency = HIGHEST_FREQ_DIAL;
else if (incdecValue < 0 && frequency < -incdecValue + LOWEST_FREQ_DIAL) //for compute and compare based integer type.
frequency = LOWEST_FREQ_DIAL;
else
frequency += incdecValue;
if (prev_freq < 10000000l && frequency > 10000000l)
isUSB = true;
@@ -448,6 +570,39 @@ void doRIT(){
}
}
/**
save Frequency and mode to eeprom
*/
void storeFrequencyAndMode(byte saveType)
{
//freqType : 0 Both (vfoA and vfoB), 1 : vfoA, 2 : vfoB
if (saveType == 0 || saveType == 1) //vfoA
{
if (vfoA != vfoA_eeprom) {
EEPROM.put(VFO_A, vfoA);
vfoA_eeprom = vfoA;
}
if (vfoA_mode != vfoA_mode_eeprom) {
EEPROM.put(VFO_A_MODE, vfoA_mode);
vfoA_mode_eeprom = vfoA_mode;
}
}
if (saveType == 0 || saveType == 2) //vfoB
{
if (vfoB != vfoB_eeprom) {
EEPROM.put(VFO_B, vfoB);
vfoB_eeprom = vfoB;
}
if (vfoB_mode != vfoB_mode_eeprom) {
EEPROM.put(VFO_B_MODE, vfoB_mode);
vfoB_mode_eeprom = vfoB_mode;
}
}
}
/**
* The settings are read from EEPROM. The first time around, the values may not be
* present or out of range, in this case, some intelligent defaults are copied into the
@@ -462,17 +617,67 @@ void initSettings(){
EEPROM.get(VFO_B, vfoB);
EEPROM.get(CW_SIDETONE, sideTone);
EEPROM.get(CW_SPEED, cwSpeed);
//for Save VFO_A_MODE to eeprom
//0: default, 1:not use, 2:LSB, 3:USB, 4:CW, 5:AM, 6:FM
EEPROM.get(VFO_A_MODE, vfoA_mode);
EEPROM.get(VFO_B_MODE, vfoB_mode);
//CW DelayTime
EEPROM.get(CW_DELAY, cwDelayTime);
//CW interval between TX and CW Start
EEPROM.get(CW_START, delayBeforeCWStartTime);
//User callsign information
if (EEPROM.read(USER_CALLSIGN_KEY) == 0x59)
userCallsignLength = EEPROM.read(USER_CALLSIGN_LEN); //MAXIMUM 18 LENGTH
//Version Write for Memory Management Software
if (EEPROM.read(VERSION_ADDRESS) != VERSION_NUM)
EEPROM.write(VERSION_ADDRESS, VERSION_NUM);
if (cwDelayTime < 1 || cwDelayTime > 250)
cwDelayTime = 60;
if (vfoA_mode < 2)
vfoA_mode = 2;
if (vfoB_mode < 2)
vfoB_mode = 3;
if (usbCarrier > 12010000l || usbCarrier < 11990000l)
usbCarrier = 11997000l;
if (vfoA > 35000000l || 3500000l > vfoA)
usbCarrier = 11995000l;
if (vfoA > 35000000l || 3500000l > vfoA) {
vfoA = 7150000l;
if (vfoB > 35000000l || 3500000l > vfoB)
vfoA_mode = 2;
}
if (vfoB > 35000000l || 3500000l > vfoB) {
vfoB = 14150000l;
vfoB_mode = 3;
}
//for protect eeprom life
vfoA_eeprom = vfoA;
vfoB_eeprom = vfoB;
vfoA_mode_eeprom = vfoA_mode;
vfoB_mode_eeprom = vfoB_mode;
if (sideTone < 100 || 2000 < sideTone)
sideTone = 800;
if (cwSpeed < 10 || 1000 < cwSpeed)
cwSpeed = 100;
if (sideTone < 300 || sideTone > 1000) {
sideTonePitch = 0;
sideToneSub = 0;;
}
else{
sideTonePitch = (sideTone - 300) / 50;
sideToneSub = sideTone % 50;
}
}
void initPorts(){
@@ -510,41 +715,185 @@ void initPorts(){
void setup()
{
Serial.begin(9600);
//Init EEProm for Fault EEProm TEST and Factory Reset
/*
for (int i = 0; i < 1024; i++)
EEPROM.write(i, 0);
*/
//Serial.begin(9600);
lcd.begin(16, 2);
//we print this line so this shows up even if the raduino
//crashes later in the code
printLine1("uBITX v0.20");
delay(500);
Init_Cat(38400, SERIAL_8N1);
initMeter(); //not used in this build
initSettings();
printLineF(1, F("CECBT v0.25"));
if (userCallsignLength > 0 && ((userCallsignLength & 0x80) == 0x80))
{
userCallsignLength = userCallsignLength & 0x7F;
printLineFromEEPRom(0, 0, 0, userCallsignLength -1); //eeprom to lcd use offset (USER_CALLSIGN_DAT)
}
else
{
printLineF(0, F("uBITX v0.20"));
delay_background(500, 0);
printLine2("");
}
initPorts();
initOscillators();
frequency = vfoA;
saveCheckFreq = frequency; //for auto save frequency
byteToMode(vfoA_mode);
setFrequency(vfoA);
updateDisplay();
if (btnDown())
factory_alignment();
/*
//This is for auto key test
EEPROM.put(CW_AUTO_MAGIC_KEY, 0x73); //MAGIC KEY
EEPROM.put(CW_AUTO_COUNT, 3); //WORD COUNT
EEPROM.put(CW_AUTO_DATA + 0, 6); // 0 word begin postion / CQCQ TEST K
EEPROM.put(CW_AUTO_DATA + 1, 33); // 0 word end postion / CQCQ TEST K
EEPROM.put(CW_AUTO_DATA + 2, 34); //1 word begin position / LOL LOL
EEPROM.put(CW_AUTO_DATA + 3, 40); //1 word end position / LOL LOL
EEPROM.put(CW_AUTO_DATA + 4, 41); //2 word begin position / /?![]789
EEPROM.put(CW_AUTO_DATA + 5, 48); //2 word end position / /?![]789
EEPROM.put(CW_AUTO_DATA + 6, 'C'); //
EEPROM.put(CW_AUTO_DATA + 7, 'Q'); //
EEPROM.put(CW_AUTO_DATA + 8, 'C'); //
EEPROM.put(CW_AUTO_DATA + 9, 'Q'); //
EEPROM.put(CW_AUTO_DATA + 10, ' '); //
EEPROM.put(CW_AUTO_DATA + 11, 'D'); //
EEPROM.put(CW_AUTO_DATA + 12, 'E'); //
EEPROM.put(CW_AUTO_DATA + 13, ' '); //
EEPROM.put(CW_AUTO_DATA + 14, 'K'); //
EEPROM.put(CW_AUTO_DATA + 15, 'D'); //
EEPROM.put(CW_AUTO_DATA + 16, '8'); //
EEPROM.put(CW_AUTO_DATA + 17, 'C'); //
EEPROM.put(CW_AUTO_DATA + 18, 'E'); //
EEPROM.put(CW_AUTO_DATA + 19, 'C'); //
EEPROM.put(CW_AUTO_DATA + 20, ' '); //
EEPROM.put(CW_AUTO_DATA + 21, 'E'); //
EEPROM.put(CW_AUTO_DATA + 22, 'M'); //
EEPROM.put(CW_AUTO_DATA + 23, '3'); //
EEPROM.put(CW_AUTO_DATA + 24, '7'); //
EEPROM.put(CW_AUTO_DATA + 25, ' '); //
EEPROM.put(CW_AUTO_DATA + 26, 'D'); //
EEPROM.put(CW_AUTO_DATA + 27, 'E'); //
EEPROM.put(CW_AUTO_DATA + 28, ' '); //
EEPROM.put(CW_AUTO_DATA + 29, 'C'); //
EEPROM.put(CW_AUTO_DATA + 30, 'E'); //
EEPROM.put(CW_AUTO_DATA + 31, 'C'); //
EEPROM.put(CW_AUTO_DATA + 32, ' '); //
EEPROM.put(CW_AUTO_DATA + 33, 'K'); //
*/
/*
EEPROM.put(CW_AUTO_DATA + 34, '<'); //
EEPROM.put(CW_AUTO_DATA + 35, ' '); //
EEPROM.put(CW_AUTO_DATA + 36, '>'); //
EEPROM.put(CW_AUTO_DATA + 37, ' '); //
EEPROM.put(CW_AUTO_DATA + 38, '7'); //
EEPROM.put(CW_AUTO_DATA + 39, '3'); //
EEPROM.put(CW_AUTO_DATA + 40, 'K'); //
EEPROM.put(CW_AUTO_DATA + 41, 'C'); //
EEPROM.put(CW_AUTO_DATA + 42, 'Q'); //
EEPROM.put(CW_AUTO_DATA + 43, ' '); //
EEPROM.put(CW_AUTO_DATA + 44, '>'); // start "
EEPROM.put(CW_AUTO_DATA + 45, ' '); // end "
EEPROM.put(CW_AUTO_DATA + 46, '>'); //
EEPROM.put(CW_AUTO_DATA + 47, ' '); //
EEPROM.put(CW_AUTO_DATA + 48, 'K'); //
*/
/*
//This is for auto key test2
//USER CALL SIGN
EEPROM.put(USER_CALLSIGN_KEY, 0x59); //MAGIC KEY
//EEPROM.put(USER_CALLSIGN_LEN, 10); //WORD COUNT
EEPROM.put(USER_CALLSIGN_LEN, 10 + 0x80); //WORD COUNT
EEPROM.put(USER_CALLSIGN_DAT + 1, 'K'); //
EEPROM.put(USER_CALLSIGN_DAT + 2, 'D'); //
EEPROM.put(USER_CALLSIGN_DAT + 3, '8'); //
EEPROM.put(USER_CALLSIGN_DAT + 4, 'C'); //
EEPROM.put(USER_CALLSIGN_DAT + 5, 'E'); //
EEPROM.put(USER_CALLSIGN_DAT + 6, 'C'); //
EEPROM.put(USER_CALLSIGN_DAT + 7, '/'); //
EEPROM.put(USER_CALLSIGN_DAT + 8, 'A'); //
EEPROM.put(USER_CALLSIGN_DAT + 9, 'B'); //
EEPROM.put(USER_CALLSIGN_DAT + 10, 'C'); //
//CW QSO CALLSIGN
EEPROM.put(CW_STATION_LEN, 6); //
EEPROM.put(CW_STATION_LEN - 6 + 0 , 'A'); //
EEPROM.put(CW_STATION_LEN - 6 + 1 , 'B'); //
EEPROM.put(CW_STATION_LEN - 6 + 2 , '1'); //
EEPROM.put(CW_STATION_LEN - 6 + 3 , 'C'); //
EEPROM.put(CW_STATION_LEN - 6 + 4 , 'D'); //
EEPROM.put(CW_STATION_LEN - 6 + 5 , 'E'); //
*/
}
/**
* The loop checks for keydown, ptt, function button and tuning.
*/
//for debug
int dbgCnt = 0;
byte flasher = 0;
void loop(){
cwKeyer();
if (!txCAT)
checkPTT();
checkButton();
void checkAutoSaveFreqMode()
{
//when tx or ritOn, disable auto save
if (inTx || ritOn)
return;
//detect change frequency
if (saveCheckFreq != frequency)
{
saveCheckTime = millis();
saveCheckFreq = frequency;
}
else if (saveCheckTime != 0)
{
//check time for Frequency auto save
if (millis() - saveCheckTime > saveIntervalSec * 1000)
{
if (vfoActive == VFO_A)
{
vfoA = frequency;
vfoA_mode = modeToByte();
storeFrequencyAndMode(1);
}
else
{
vfoB = frequency;
vfoB_mode = modeToByte();
storeFrequencyAndMode(2);
}
}
}
}
void loop(){
if (isCWAutoMode == 0){ //when CW AutoKey Mode, disable this process
if (!txCAT)
checkPTT();
checkButton();
}
else
controlAutoCW();
cwKeyer();
//tune only when not tranmsitting
if (!inTx){
if (ritOn)
@@ -552,7 +901,8 @@ void loop(){
else
doTuning();
}
//we check CAT after the encoder as it might put the radio into TX
checkCAT();
Check_Cat(inTx? 1 : 0);
checkAutoSaveFreqMode();
}