diff --git a/ansible/roles/scanner_digirig/tasks/main.yml b/ansible/roles/scanner_digirig/tasks/main.yml
new file mode 100644
index 0000000..4ce3409
--- /dev/null
+++ b/ansible/roles/scanner_digirig/tasks/main.yml
@@ -0,0 +1,122 @@
+# Role: scanner_digirig
+# Configure direwolf with the Digirig device
+#
+# - Set up udev rules to make special device drivers for the Digirig in /dev/radio so we don't
+#   have to relay on /dev/ttyUSB0, 1 or whatever number the OS happens to assign. This gives the
+#   device names consistency.
+#
+# - Set up systemd service to start Direwolf when the device is connected via USB, and to stop it
+#   when the radio is disconnected.
+#
+# - Copy configuration files
+#
+
+- name: Create various directories
+  file:
+    path: "{{item}}"
+    state: directory
+    owner: busnet
+    group: busnet
+    mode: u=rwx,g=rwx,o=rx
+  with_items:
+    - /opt/busnet/direwolf
+    - /opt/busnet/direwolf/config
+    - /opt/busnet/direwolf/logs
+
+- name: Make sure busnet user is in groups for audio and USB access
+  ansible.builtin.user:
+    name: busnet
+    groups: "{{item}}"
+    append: yes
+  with_items:
+    - dialout
+    - pulse-access
+    - audio
+    - plugdev
+
+###################################################################################################
+# DIREWOLF CONF
+###################################################################################################
+
+- name: Copy Direwolf config for Digirig
+  template:
+    src: "templates/digirig-direwolf.conf.j2"
+    dest: "/opt/busnet/direwolf/config/digirig.conf"
+    owner: busnet
+    group: busnet
+
+
+###################################################################################################
+# SYSTEMD
+###################################################################################################
+
+# udev rules start this automatically when the radio USB is connected, and stop when disconnected.
+- name: Install systemd unit file for Direwolf and Digirig USB sound card
+  template:
+    src: "templates/digirig-direwolf.service.j2"
+    dest: "/etc/systemd/system/digirig-direwolf.service"
+    owner: root
+    group: root
+    mode: "0644"
+
+- name: Enable digirig-direwolf service
+  systemd:
+    name: "digirig-direwolf"
+    daemon_reload: true
+    enabled: true
+
+# socat creates a full duplex/bidirectional pipe between a serial port /dev/radio/digirig-tnc and
+# Direwolf's KISS TCP interface, which is running on localhost:8001. The kissattach program needs
+# a serial port to work, and this is how we accomplish connecting kissattach to direwolf.
+- name: Install systemd unit file for digirig-socat
+  template:
+    src: "templates/digirig-socat.service.j2"
+    dest: "/etc/systemd/system/digirig-socat.service"
+    owner: root
+    group: root
+    mode: "0644"
+
+- name: Enable digirig-socat service
+  systemd:
+    name: "digirig-socat"
+    daemon_reload: true
+    enabled: true
+
+# This starts after digirig-socat and makes the attachment to the new serial device we just created
+# with socat! This effectively connects the Linux AX.25 system to direwolf's KISS TCP port.
+- name: Install systemd unit file for digirig-kissattach
+  template:
+    src: "templates/digirig-kissattach.service.j2"
+    dest: "/etc/systemd/system/digirig-kissattach.service"
+    owner: root
+    group: root
+    mode: "0644"
+
+- name: Enable digirig-kissattach service
+  systemd:
+    name: "digirig-kissattach"
+    daemon_reload: true
+    enabled: true
+
+
+###################################################################################################
+# UDEV RULES
+###################################################################################################
+
+- name: Copy udev rules for the Digirig USB sound card
+  template:
+    src: templates/98-digirig-udev.rules.j2
+    dest: /etc/udev/rules.d/98-digirig-udev.rules
+    owner: root
+    group: root
+  register: digirig_udev_result
+
+- name: Reload udev rules
+  ansible.builtin.command:
+    cmd: "udevadm control --reload"
+  when: digirig_udev_result.changed
+
+- name: udevadm trigger
+  ansible.builtin.command:
+    cmd: "udevadm trigger"
+  when: digirig_udev_result.changed
diff --git a/ansible/roles/scanner_digirig/templates/98-digirig-udev.rules.j2 b/ansible/roles/scanner_digirig/templates/98-digirig-udev.rules.j2
new file mode 100644
index 0000000..5035e98
--- /dev/null
+++ b/ansible/roles/scanner_digirig/templates/98-digirig-udev.rules.j2
@@ -0,0 +1,27 @@
+# udev rule to provide fixed device name for my Digirig and start/stop services automatically!
+
+# This information was retrieved by the following. Assuming the radio USB sound card is hooked 
+# up to /dev/ttyUSB0
+#
+# craig@scanner:~$ udevadm info /dev/ttyUSB0 | grep ID_SERIAL
+# E: ID_SERIAL=Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_809986b5195bed119acbed165820eef3
+# E: ID_SERIAL_SHORT=809986b5195bed119acbed165820eef3
+#
+
+
+# This creates /dev/radio/digirig-sound which is a USB sound card device
+# It does not matter what USB port it's plugged into, or how many other USB devices are also plugged in.
+# ---------------------------------------------------------------------------------------------------
+SUBSYSTEM=="tty", ENV{ID_SERIAL_SHORT}=="809986b5195bed119acbed165820eef3", SYMLINK+="radio/digirig-sound", MODE="660", GROUP="plugdev"
+
+
+# Automatically start direwolf when the radio is connected. Identify the radio by the
+# unique setial number.
+# - This direwolf instance is only for this radio.
+# ---------------------------------------------------------------------------------------------------
+ACTION=="add", SUBSYSTEM=="tty", ENV{ID_SERIAL_SHORT}=="809986b5195bed119acbed165820eef3", TAG+="systemd" ENV{SYSTEMD_WANTS}+="digirig-direwolf.service"
+
+
+# Automatically stop direwolf when the radio is connected.
+# ---------------------------------------------------------------------------------------------------
+ACTION=="remove", SUBSYSTEM=="tty", ENV{ID_SERIAL_SHORT}=="809986b5195bed119acbed165820eef3",TAG+="systemd" ENV{SYSTEMD_WANTS}-="digirig-direwolf.service"
diff --git a/ansible/roles/scanner_digirig/templates/digirig-direwolf.conf.j2 b/ansible/roles/scanner_digirig/templates/digirig-direwolf.conf.j2
new file mode 100644
index 0000000..4a2e2fb
--- /dev/null
+++ b/ansible/roles/scanner_digirig/templates/digirig-direwolf.conf.j2
@@ -0,0 +1,24 @@
+# This file is managed by BusNet Ansible
+#
+# This is the Direwolf configuration for connecting Direwolf to the Digirig USB sound card.
+#
+# There us a udev rule which creates "/dev/radio/digirig-sound" so that we do not have to worry about
+# what USB port or tty number is assigned when this device is connected to the computer.
+
+ADEVICE plughw:Device,0
+
+# The custom udev rule makes this device available by name.
+PTT /dev/radio/digirig-sound RTS
+
+MYCALL K0BIT
+
+MODEM 1200
+
+# Enable FX.25 with fallback to regular AX.25
+FX25TX 1 
+
+AGWPORT 8000
+KISSPORT 8001
+
+# In the future, I might set up a RV BBS! I would beacon it here.
+#PBEACON every=1 overlay=S symbol="bus" lat=29.958260914551104 long=-90.05442788530239 comment="I'm like testing APRS, man" via=WIDE1-1,WIDE2-1
diff --git a/ansible/roles/scanner_digirig/templates/digirig-direwolf.service.j2 b/ansible/roles/scanner_digirig/templates/digirig-direwolf.service.j2
new file mode 100644
index 0000000..6bf0b1e
--- /dev/null
+++ b/ansible/roles/scanner_digirig/templates/digirig-direwolf.service.j2
@@ -0,0 +1,24 @@
+# This file is managed by BusNet Ansible.
+#
+# This service starts Direwolf when the Digirig device is connected to this computer.
+#
+# There is a corresponding udev rule that triggers this service automatically when it detects that
+# the radio's USB devices are connected. There is also a udev rule that shuts it down when the USB
+# is disconnected.
+
+[Unit]
+Description=Direwolf TNC for Digirig
+
+# Automatically start these other services to complete the Linux AX25 stack.
+Requires=digirig-socat.service
+Requires=digirig-kissattach.service
+
+[Service]
+ExecStart=/usr/local/bin/direwolf -q hdx -t 0 -X 1 -c /opt/busnet/direwolf/config/digirig.conf
+Restart=on-failure
+RestartSec=5
+User=busnet
+Group=busnet
+
+[Install]
+WantedBy=multi-user.target
diff --git a/ansible/roles/scanner_digirig/templates/digirig-kissattach.service.j2 b/ansible/roles/scanner_digirig/templates/digirig-kissattach.service.j2
new file mode 100644
index 0000000..92f300e
--- /dev/null
+++ b/ansible/roles/scanner_digirig/templates/digirig-kissattach.service.j2
@@ -0,0 +1,26 @@
+[Unit]
+Description=AX.25 Interface Setup via kissattach for Digirig
+
+# We must start AFTER the socat service has created the virtual TNC link.
+#Requires=digirig-socat.service
+After=digirig-socat.service
+
+[Service]
+Type=Forking # kissattach will fork itself and run as a daemon in the background
+User=root 
+Restart=always
+RestartSec=10s
+
+# Wait 6 seconds to give both direwolf and socat time to start.
+ExecStartPre=/bin/sleep 6
+
+# This PTY is created by the digirg-socat service, which is a pipe between this device and
+# Direwolf's KISS port for the digirig. Kissattach cannot use KISS over TCP directly to Direwolf
+# so it needs the extra step of using socat.
+ExecStart=/usr/sbin/kissattach /dev/radio/digirig-tnc digirig
+
+# We must do this because it forked itself.
+ExecStop=/usr/bin/pkill -f 'kissattach /dev/radio/digirig-tnc digirig'
+
+[Install]
+WantedBy=multi-user.target
\ No newline at end of file
diff --git a/ansible/roles/scanner_digirig/templates/digirig-socat.service.j2 b/ansible/roles/scanner_digirig/templates/digirig-socat.service.j2
new file mode 100644
index 0000000..bd014a9
--- /dev/null
+++ b/ansible/roles/scanner_digirig/templates/digirig-socat.service.j2
@@ -0,0 +1,22 @@
+[Unit]
+Description=SOCAT Virtual Serial Port Bridge to Digirig Direwolf
+
+# This ensures socat only starts AFTER the main Dire Wolf service is active.
+#Requires=digirig-direwolf.service 
+After=digirig-direwolf.service
+
+[Service]
+User=root 
+Restart=always
+RestartSec=5s
+
+# Wait 3 seconds to give Direwolf time to start.
+ExecStartPre=/bin/sleep 3
+
+# socat creates a full duplex/bidirectional pipe between a serial port /dev/radio/digirig-tnc and
+# Direwolf's KISS TCP interface, which is running on localhost:8001. The kissattach program needs
+# a serial port to work, and this is how we accomplish connecting kissattach to direwolf.
+ExecStart=/usr/bin/socat PTY,raw,echo=0,link=/dev/radio/digirig-tnc TCP4:127.0.0.1:8001
+
+[Install]
+WantedBy=multi-user.target
\ No newline at end of file
diff --git a/orchestrate/ansible.sh b/orchestrate/ansible.sh
index 613b6ba..c493dcf 100755
--- a/orchestrate/ansible.sh
+++ b/orchestrate/ansible.sh
@@ -30,6 +30,7 @@ show_help()
 	echo
 	echo "scanner.busnet:"
 	echo "---------------------------------------------------------------------------------------------------------------"
+	echo "  --scanner-digirig        Set up udev rules, AX25, etc for the Digirig connected to the dedicated 2m radio"
 	echo "  --scanner-ft991a         Set up udev rules, rigctld and direwolf for the Yaesu FT-991a radio"
 	echo "  --scanner-pat            Install and configure pat winlink client on scanner.busnet"
 	echo "  --scanner-hamlib         Install and configure direwolf on scanner.busnet"