Problem: console dialog cannot save unnamed buffers
Solution: set bufname before save (glepnir). Define dialog_con_gui
to test for GUI+Console dialog support, use it to skip
the test when the GUI feature has been defined.
Note: The dialog_changed() function will also try to call the
browse_save_fname() function, when FEAT_BROWSE is defined (which is only
defined in a GUI build of Vim). This will eventually lead to a call of
do_browse(), which causes an error message if a GUI is not currently
running (see the TODO: in do_browse()) and will then lead to a failure
in Test_goto_buf_with_onfirm().
Therefore, we must disable the Test_goto_buf_with_onfirm(), when the
dialog_con_gui feature is enabled (which basically means dialog feature
for GUI and Console builds, in contrast to the dialog_con and dialog_gui
feature).
(Previously this wasn't a problem, because the test aborted in the YES
case for the :confirm :b XgotoConf case and did therefore not run into
the browse function call)
closes: #14398
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: libgpm may delete some signal handlers
Solution: restore these signal handlers after calling gpm
(Julio B)
When 'mouse' is set, vim is trying to detect mouse support on startup.
Eventually, vim resorts to using libgpm as the final method of
mouse detection. This library may delete some signals handlers that were
initially set up by vim.
This is how:
- mch_setmouse() calls gpm_open()
- Gpm_Open is executed, which returns early on line 210 [1]
- Keep in mind that lines 353-373 [2] are skipped, so
gpm_saved_suspend_hook and gpm_saved_winch_hook are empty
- Finally, Gpm_Close is called, which will reset [3] SIGWINCH and
SIGTSTP to an empty sigaction.
[1] e82d1a653c/src/lib/liblow.c (L210)
[2] e82d1a653c/src/lib/liblow.c (L353-L373)
[3] e82d1a653c/src/lib/liblow.c (L419-L424)fixes: #12154closes: #14401
Signed-off-by: Julio B <julio.bacel@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: Problem with lambda blocks in enums and classes
(Aliaksei Budavei)
Solution: Support evaluating lambda blocks from a string, skip over
comments (Yegappan Lakshmanan)
fixes: #14350closes: #14405
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Test for TextChanged is flaky with ASAN.
Solution: Wait for the file to be non-empty.
(zeertzjq)
closes: #14404
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: protected class and funcrefs accessible outside the class
(Aliaksei Budavei)
Solution: Check if class and object funcrefs are protected
(Yegappan)
closes: #14407
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: "zb" does not reveal filler lines at the start of a buffer.
Scrolled cursor position with 'smoothscroll' is unpredictable,
and may reset skipcol later if it is not visible (after v9.1.258)
Solution: Replace confusing for loop that reaches final control value too
early with while loop. Set "w_curswant" accordingly so cursor
will be placed in visible part of topline.
(Luuk van Baal)
closes: #14394
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Normal mode TextChanged isn't tested properly.
Solution: Combine Test_Changed_ChangedI() and Test_Changed_ChangedI_2()
and also run it on Windows. Fix a typo in main.c.
(zeertzjq)
closes: #14396
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Support for 'smoothscroll' in (half-)page scrolling
broke backward compatibility and can be made to work better.
(after v9.1.215)
Solution: Restore the previous cursor and end-of-buffer behavior for
half-page scrolling and improve 'smoothscroll' support.
(Luuk van Baal)
fixes: #14338closes: #14377
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: :call may not find imported class members
(mityu)
Solution: Set the typval of an imported lval variable correctly
(Yegappan Lakshmanan)
fixes: #14334closes: #14386
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Finding autocmd events is inefficient
Solution: Use binary search to find events, cache last found events,
avoid use of strlen(), add SessionWritePost autocmd,
fix test_codestyle and avoid endless loop
(John Marriott)
closes: #14287
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: no indication of script nr in stack trace of classes
Solution: Prefix the class name with the script name in the stack trace.
(Ernie Rael)
fixes: #14376closes: #14390
Signed-off-by: Ernie Rael <errael@raelity.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: Heap buffer overflow when calling complete_add()
in the first call of 'completefunc'
Solution: Call check_cursor() after calling 'completefunc' (zeertzjq)
closes: #14391
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: typespec files are not recognized
Solution: Detect '*.tsp' files as typespec
(Hilmar Wiegand)
Specs is at https://typespec.io/closes: #14392
Signed-off-by: Hilmar Wiegand <me@hwgnd.de>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: segfault with static in super class
(Ernie Rael)
Solution: When initializing lhs, use the correct class where a class
variable is defined (Yegappan Lakshmanan)
fixes: #14352closes: #14372
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Filetype test fails.
Solution: Move detection by name before detection by extension.
Improve TextChanged test and remove wrong test and fix
a typo in a comment (zeertzjq).
closes: #14373
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: rock_manifest and config.ld files are not recognized
Solution: Detect 'rock_manifest' and 'config.ld' as lua
(Wu, Zhenyu)
closes: #14370
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: fontconfig files are not recognized
Solution: detect 'fonts.conf' as xml
(Wu, Zhenyu)
closes: #14367
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: zsh theme, history and zunit files are not
recognized.
Solution: Detect '.zsh_history', '*.zsh-theme' and '*.zunit' as zsh
(Wu, Zhenyu)
closes: #14366
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: bash history files are not recognized
Solution: detect .bash-history and .bash_history files as bash
(Wu, Zhenyu)
closes: #14365
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: netrw history file is not recognized
Solution: Detect .netrwhist as vim files (Wu, Zhenyu)
closes: #14364
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: mysql history files are not recognized
Solution: Detect .mysql_history as mysql
(Wu, Zhenyu)
closes: #14362
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: jupyterlab and sublime config are not recognized
Solution: Detect jupyterlab and sublime config files as json
(Wu, Zhenyu)
closes: #14359
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: supertux files are not recognized
Solution: Supertux uses lisp to store hotkeys in config and game stage information,
so add a pattern for supertux files.
(Wu, Zhenyu)
Reference: https://github.com/SuperTux/supertux/wiki/S-Expressioncloses: #14356
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: support for Intel HEX files is lacking
Solution: Add more file extensions that are typical for Intel HEX files
(Wu, Zhenyu)
Reference: https://en.wikipedia.org/wiki/Intel_HEXcloses: #14355
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: string() output of enum is problematic
Solution: Make string() output for an enum consistent with that of a
regular object (Yegappan Lakshmanan).
closes: #14343
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Conceal test fails when rightleft feature is disabled.
Solution: Skip test if rightleft feature is missing (Julio B).
closes: #14342
Signed-off-by: Julio B <julio.bacel@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Filetype may be undetected when a SwapExists autocommand sets
filetype in another buffer.
Solution: Make filetype detection state buffer-specific. Also fix a
similar problem for 'modified' (zeertzjq).
closes: #14344
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: TextChanged autocommand not triggered under some circumstances
(Sergey Vlasov)
Solution: Trigger TextChanged when TextChangedI has not been triggered
fixes: #14332closes: #14339
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Error E877 is not translated (RestorerZ)
Solution: Declare the error with N_ to mark it as translatable, add _()
around the error message in regexp_nfa.c
fixes: #14333
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Two unrelated things are tested by a single test.
Solution: Split it into two, restoring the old Test_brace_single_line().
Add missing cleanup to some tests.
(zeertzjq)
closes: #14323
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Recording may still be wrong in Select mode (after 8.2.3993).
Solution: Make sure a character isn't split between two buffer blocks.
(zeertzjq)
closes: #14326
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Not able to assign enum values to an enum static variable
(zzzyxwvut)
Solution: Make it work
(Yegappan Lakshmanan)
related: #14224closes: #14329
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: test_matchparen not run in CI
Solution: add test_matchparen.res to NEW_TESTS_RES in Makefile,
update changed highlighting dump from v9.1.61
closes: #14322
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: If a line has "right" & "below" virtual text properties,
where the "below" property may be stored first due to lack of
ordering between them, then the line height is calculated to
be 1 more and causes the cursor to far over the line.
Solution: Remove some unnecessary setting of a
`next_right_goes_below = TRUE` flag for "below" and "above"
text properties. (Dylan Thacker-Smith)
I modified a regression test I recently added to cover this case,
leveraging the fact that "after", "right" & "below" text properties are
being stored in the reverse of the order they are added in. The
previous version of this regression test was crafted to workaround this
issue so it can be addressed by this separate patch.
closes: #14317
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: There are two dense conditions with duplication that needs to
be kept in sync between the while loop break condition and the
condition to skip certain text properties.
Solution: Refactor the loop by moving while loop conditions into the
body of the while loop so they can be shared with skip
conditions. `break` and an `active` variable are used to
handle the outcome of these merged conditions.
(Dylan Thacker-Smith)
closes: #14307
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When a line is truncated just before 'after'/'right' virtual
text and the line also has 'below' virtual text, then the
'below' virtual text would not be displayed, depending on the
order these text properties were added.
Solution: In the loop to make text properties active, skip instead of
break for 'after'/'right' virtual text properties that are
ignored due to truncation, so following 'below' text
properties can still be made active.
Similarly, a loop is needed to determine if a text property
follows at the end of the screen. (Dylan Thacker-Smith)
related: #14307
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The if branch to set `text_prop_follows` was both checking if
it was at the end of the buffer text line or if it was at the
end of the screen line, but the former being true skipped
a guard condition in the latter to only consider 'below'
virtual text to follow. `text_prop_follows` being improperly
set caused it to skip a conditional block to break at the end
as well as one to move `ptr` to the end of the text line,
while repeated for each following line of the window.
Solution: Move the check for whether 'below' virtual text should follow
so it is also used when at the end of the buffer text line.
(Dylan Thacker-Smith)
fixes: #12213
related: #14307
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Unnecessary multiplications in backspace code, as
"col / ts * ts" is the same as "col - col % ts".
Solution: Change "col / ts * ts" to "col - col % ts". Adjust the loop
and the comments ins_bs() to be easier to understand. Update
tests to reset 'smarttab' properly.
(zeertzjq)
closes: #14308
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Error on exit with EXITFREE and 'winfixbuf'.
Solution: Handle DT_FREE before checking for 'winfixbuf'.
(zeertzjq)
closes: #14314
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Page-wise scrolling with Ctrl-D/Ctrl-U implements
it's own logic to change the topline and cursor.
More logic than necessary for scrolling with Ctrl-F/Ctrl-B
was removed in patch 9.1.0211.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y/Ctrl-F/Ctrl-B while
staying backward compatible as much as possible.
Restore some of the logic that determined how many lines will
be scrolled (Luuk van Baal)
closes: #14316
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
