Give priority to (placement) command modifiers, specifically
`:vertical`, `:horizontal` and `:tab`, ahead of `g:ft_man_open_mode`,
so that if the user says e.g. `:vert Man`, Vim does the expected thing.
closes: #15117
Signed-off-by: Ivan Shapovalov <intelfx@intelfx.name>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- update tags to detect djangohtml based on
https://docs.djangoproject.com/en/5.0/ref/templates/builtins/#built-in-tag-reference
- increase the lines to inspect to 40 lines
10 lines is too few and might result in high false negative.
Increasing it to 40 lines should reduce the false negative.
closes: #15037
Signed-off-by: Afiq Nazrie <afnazrie@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim-script files may not be recognised
Solution: Add shebang line detection (Doug Kearns)
closes: #15012
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
This was wrongly included as of patch 1c6734291295bf8aa39577840b40bb
because apparently I messed up the use of git apply :/
Signed-off-by: Christian Brabandt <cb@256bit.org>
This change does the following 3 things:
1) non need to quote the file to be extracted
The zipfile plugin used to quote and fnameescape() the path to the
file to be extracted. However testing with unzip showed, that while this
works on Linux on Windows you shall not escape the blanks in filenames.
As long as the pathname is properly quoted, this words on Linux and
Windows.
2) reset shellslash (MS-Windows only)
When shellslash is set, filenames to the zip archive will be forward
quoted. However since the filename is eventually handed over to the
unzip command, we need to make sure to use native paths so that the
command will understand what file to open. Therefore, if shellslash is
set (and the shell is cmd.exe), replace any forward slashes by the
expected backslashes
3) style:
Use tabs for the Header, remove a few comments in the s:Escape() and
zip#read() functions
fixes: #14998
Signed-off-by: Christian Brabandt <cb@256bit.org>
Refactored zig ftplugin, removed upstream comment, aucmd and
auto formatting support. Updated documentation for zig configuration
settings and added new maintainer.
closes: #13803
Signed-off-by: Tiseno <mathias.lindgren@stabelo.se>
Signed-off-by: Christian Brabandt <cb@256bit.org>
regression introduced in ce2ad9ffd79fe6b2307cd46b9
The current logic is a bit funny, in that it checks for an executable of
scp, then pscp and if neither exists, it uses: scp :/
Anyway, let's fall back to the logic used before the above commit.
related: #14739
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: zsh module files are not recognized
Solution: Detect '*.mdh' and '*.epro' as C filetype, '*.mdd' as zsh
filetype, determine zsh-modules '*.pro' from from it's content
(Wu, Zhenyu)
closes: #14737
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: runtime(uci): No support for uci file types
(Wu, Zhenyu)
Solution: include basic uci ftplugin and syntax plugins
(Colin Caine)
closes: #14575
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Colin Caine <complaints@cmcaine.co.uk>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: some TeX files are not recognized
Solution: Add more patterns for TeX files and inspect
a few more files for being TeX files
(Wu, Zhenyu)
closes: #14456
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Update Last-Change Header for netrw and doc/indent.txt, fix a trailing
whitespace in indent.txt and make CI happy.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Modula-2 files with a specified priority are not detected.
Solution: Match the priority syntax in module header lines when
performing heuristic content detection.
Disable the :defcompile debug line. This was accidentally left enabled
in commit 68a8947.
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Make pattern, which retrieves the path component from e.g.
`scp://user@host//opt/program/file.ext` non-greedy.
Signed-off-by: GuyBrush <miguel.barro@live.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Originally reported at: https://github.com/vim-jp/issues/issues/1428
'isk' was unintentionally changed by netrw, regression
introduced in Commit: 71badf9547e8f89571b9a095183671cbb333d528
Signed-off-by: Ken Takata <kentkt@csc.jp>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Use `printf("%c")` instead of `nr2char()` to handle '%xx' as a byte.
Close#13787
Signed-off-by: Ken Takata <kentkt@csc.jp>
Signed-off-by: Christian Brabandt <cb@256bit.org>
From: #138331:
- Updating .tar.zst files was broken. Fixes#12639.
- Extracting files from .tar.zst / .tzs files was also broken and
works now.
From: #12637:
- Fixes variable assignment and typo
From: #8109:
- Rename .tzs to the more standard .tzst
fixes: #12639fixes: #8105closes: #8109closes: #12637closes: #13831
Co-authored-by: Martin Rys <martin@rys.pw>
Co-authored-by: Eisuke Kawashima <e-kwsm@users.noreply.github.com>
Co-authored-by: Carlo Teubner <carlo@cteubner.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Update to the ConTeXt runtime files. Changes:
1. shared syntax files updated with `mtxrun --script interface --vim`
using the latest ConTeXt LMTX.
2. fixed reference to `make` tag in the help file.
3. added `keepend` to mitigate issues with embedded Lua syntax (see
below).
4. the latest revision date of each ConTeXt runtime file has been
updated to the date of this commit.
The issue about embedded Lua was reported by a user:
>Take the following valid ConTeXt file:
> \starttext
> \ctxlua{context("Text generated from Lua.")}
> \ctxlua{context("Another text generated from Lua.")}
> \stoptext
>On my Vim installation (including when I start Vim with `--clean`), the
>closing bracket and curly braces on line 2 are highlighted red and the
>syntax highlighting after that is off.
>I was trying to dig a little bit into what was going on, using the
>`synID()` and `synIDattr()` functions. It appears that the closing
>bracket on line 2 is matched as a `luaParentError` instead of the end
>of the `luaParen` region. Therefore, the `luaParen` region continues
>all the way to the end of the file. The closing curly brace on line
>2 is matched as a `luaError`, the 2nd `\ctxlua` on line 3 as
>`luaParen`, etc.
>This issue doesn't occur in a plain Lua file, where the closing bracket
>is correctly matched as the end of the `luaParen` region. So it seems
>that something goes wrong when the Lua syntax file is included in the
>ConTeXt one.
By adding `keepend`, the right parenthesis for some reason is still
highlighted as a `luaParenError`, but at least the right curly brace
should correctly end the Lua block.
From what I've seen, I think it is very difficult to embed Lua syntax
properly without help from the Lua syntax file (that is, without
patching it). It has global rules such as:
syn match luaParenError ")"
syn match luaError "}"
which make it difficult, if not impossible, to contain Lua syntax
without `keepend` (and its limitations).
Signed-off-by: Lifepillar <lifepillar@lifepillar.me>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: no filetype detection for execline scripts
Solution: Add filetype detection for execline
as a prior to adding syntax support for execline (see
https://github.com/djpohly/vim-execline/issues/2), i went ahead and made
the filetype detection for execline scripts.
closes: #13689
Signed-Off-By: Mazunki Hoksaas <rolferen@gmail.com>
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
This brings the included Racket runtime files to commit 43bfc87 (update
headers, 2023-12-15) of https://github.com/benknoble/vim-racket. Note
that not all files from that repository are included. (In particular,
the ftdetect script is omitted for now.)
Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Add syntax and filetype plugins for SWIG (Simplified Wrapper Interface
Generator) description files.
The default syntax for .i files highlights comments in a reverse
color scheme which doesn't look well. This syntax builds
on vim's c++ syntax by adding highlighting for common swig
directives and user defined directives. For an alternative
syntax, see vimscript #1247 (which I found after writing this).
closes: #13562
Co-authored-by: Matěj Cepl <mcepl@cepl.eu>
Co-authored-by: Julien Marrec <julien.marrec@gmail.com>
Signed-off-by: Julien Marrec <julien.marrec@gmail.com>
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
If there is a file with a very long filename (longer than
g:netrw_maxfilenamelen), and if g:netrw_liststyle is set to 1, no space
is inserted between the filename and the filesize and the file cannot be
opened because of this.
E.g.:
```
$ echo hello > 12345678901234567890123456789012 # 32 bytes: OK
$ echo hello > 123456789012345678901234567890123 # 33 bytes: not OK
$ echo hello > 1234567890123456789012345678901234 # 34 bytes: not OK
$ echo hello > こんにちは # multibyte filename
$ LC_ALL=C.UTF-8 vim . --clean --cmd "set loadplugins" --cmd "let g:netrw_liststyle=1"
```
Then, it will be shown like this:
```
" ============================================================================
" Netrw Directory Listing (netrw v171)
" /cygdrive/c/work/netrw-test
" Sorted by name
" Sort sequence: [\/]$,\<core\%(\.\d\+\)\=\>,\.h$,\.c$,\.cpp$,\~\=\*$,*,\.o$,\
" Quick Help: <F1>:help -:go up dir D:delete R:rename s:sort-by x:special
" ==============================================================================
../ 0 Mon Mar 13 19:25:16 2023
./ 0 Mon Mar 13 19:44:58 2023
12345678901234567890123456789012 6 Mon Mar 13 19:29:43 2023
12345678901234567890123456789012346 Mon Mar 13 19:32:40 2023
1234567890123456789012345678901236 Mon Mar 13 19:29:49 2023
こんにちは 6 Mon Mar 13 19:30:41 2023
```
If the length of the filename is 32 bytes, there is a space between the
filename and the filesize. However, when it is longer than 32 bytes, no
space is shown.
Also, you may find that the filesize of the multibyte named file is not
aligned.
After this patch is applied, the filelist will be shown like this:
```
" ============================================================================
" Netrw Directory Listing (netrw v171)
" /cygdrive/c/work/netrw-test
" Sorted by name
" Sort sequence: [\/]$,\<core\%(\.\d\+\)\=\>,\.h$,\.c$,\.cpp$,\~\=\*$,*,\.o$,\
" Quick Help: <F1>:help -:go up dir D:delete R:rename s:sort-by x:special
" ==============================================================================
../ 0 Mon Mar 13 20:49:22 2023
./ 0 Mon Mar 13 21:12:14 2023
1234567890123456789012345678901 10000 Mon Mar 13 20:57:55 2023
12345678901234567890123456789012 6 Mon Mar 13 19:29:43 2023
123456789012345678901234567890123 6 Mon Mar 13 19:29:49 2023
1234567890123456789012345678901234 6 Mon Mar 13 19:32:40 2023
1234567890123456789012345678901234567 10000 Mon Mar 13 21:03:23 2023
1234567890123456789012345678901234567890 10000 Mon Mar 13 21:03:36 2023
123456789012345678901234567890123456789012 10000 Mon Mar 13 21:03:59 2023
1234567890123456789012345678901234567890123 10000 Mon Mar 13 21:03:45 2023
1234567890123456789012345678901234567890123456 5 Mon Mar 13 21:08:15 2023
12345678901234567890123456789012345678901234567 10 Mon Mar 13 21:05:21 2023
こんにちは 6 Mon Mar 13 19:30:41 2023
```
Now we have 32 + 2 + 15 = 49 characters for filename and filesize.
It tries to align the filesize as much as possible.
The last line that has multibyte filename is also aligned.
Also fixed the issue that the file list is not shown correctly when
g:netrw_sort_by is set to 'size' and g:netrw_sizestyle is set to 'h' or
'H'.
Signed-off-by: Christian Brabandt <cb@256bit.org>
When expanding $COMSPEC and a user has set :set wildignore=*.exe
netrw won't be able to properly cmd.exe, because it does not ignore the
wildignore setting.
So let's explicitly use expand() without applying the 'wildignore' and
'suffixes' settings to the result
closes: #13426
Signed-off-by: Christian Brabandt <cb@256bit.org>
