Problem: Filetype test fails.
Solution: Move detection by name before detection by extension.
Improve TextChanged test and remove wrong test and fix
a typo in a comment (zeertzjq).
closes: #14373
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: TextChanged autocommand not triggered under some circumstances
(Sergey Vlasov)
Solution: Trigger TextChanged when TextChangedI has not been triggered
fixes: #14332closes: #14339
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Unnecessary multiplications in backspace code, as
"col / ts * ts" is the same as "col - col % ts".
Solution: Change "col / ts * ts" to "col - col % ts". Adjust the loop
and the comments ins_bs() to be easier to understand. Update
tests to reset 'smarttab' properly.
(zeertzjq)
closes: #14308
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Page-wise scrolling with Ctrl-D/Ctrl-U implements
it's own logic to change the topline and cursor.
More logic than necessary for scrolling with Ctrl-F/Ctrl-B
was removed in patch 9.1.0211.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y/Ctrl-F/Ctrl-B while
staying backward compatible as much as possible.
Restore some of the logic that determined how many lines will
be scrolled (Luuk van Baal)
closes: #14316
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Backspace inserts spaces with virtual text and 'smarttab'.
Solution: Ignore virtual text and wrapping when backspacing.
(zeertzjq)
related: neovim/neovim#28005
closes: #14296
Co-authored-by: VanaIgr <vanaigranov@gmail.com>
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: More code can use ml_get_buf_len() instead of STRLEN().
Solution: Change more STRLEN() calls to ml_get_buf_len(). Also do not
set ml_line_textlen in ml_replace_len() if "has_props" is set,
because "len_arg" also includes the size of text properties in
that case. (zeertzjq)
closes: #14183
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: too many STRLEN() calls
Solution: Make use of ml_get_len() calls instead
(John Marriott)
closes: #14123
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Calling STRLEN() to compute ml_line_textlen when not needed.
Solution: Use 0 when STRLEN() will be required and call STRLEN() later.
(zeertzjq)
closes: #14155
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Text properties corrupted with fo+=aw and backspace
Solution: Allocate line and move text properties
(zeertzjq)
closes: #14147
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: ml_get_buf_len() does not consider text properties
(zeertzj)
Solution: Store text length excluding text properties length
in addition in the memline
related #14123closes: #14133
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: TextChanged not triggered for :norm! commands
(machakann, after v9.0.2031)
Solution: Only reset curbuf->b_last_changedtick if TextChangedI
was triggered in insert mode (and not blocked)
Note: for unknown reasons, the test fails on Windows (but seems to work
fine when running interactively)
fixes: #13967closes: #13984
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot map Super Keys in GTK UI
(Casey Tucker)
Solution: Enable Super Key mappings in GTK using <D-Key>
(Casey Tucker)
As a developer who works in both Mac and Linux using the same keyboard,
it can be frustrating having to remember different key combinations or
having to rely on system utilities to remap keys.
This change allows `<D-z>` `<D-x>` `<D-c>` `<D-v>` etc. to be recognized
by the `map` commands, along with the `<D-S-...>` shifted variants.
```vimrc
if has('gui_gtk')
nnoremap <D-z> u
nnoremap <D-S-Z> <C-r>
vnoremap <D-x> "+d
vnoremap <D-c> "+y
cnoremap <D-v> <C-R>+
inoremap <D-v> <C-o>"+gP
nnoremap <D-v> "+P
vnoremap <D-v> "-d"+P
nnoremap <D-s> :w<CR>
inoremap <D-s> <C-o>:w<CR>
nnoremap <D-w> :q<CR>
nnoremap <D-q> :qa<CR>
nnoremap <D-t> :tabe<CR>
nnoremap <D-S-T> :vs#<CR><C-w>T
nnoremap <D-a> ggVG
vnoremap <D-a> <ESC>ggVG
inoremap <D-a> <ESC>ggVG
nnoremap <D-f> /
nnoremap <D-g> n
nnoremap <D-S-G> N
vnoremap <D-x> "+x
endif
```
closes: #12698
Signed-off-by: Casey Tucker <dctucker@hotmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: i_CTRL-] triggers InsertCharPre
Solution: Return if CTRL-] is received. InsertCharPre
is supposed to be only used for chars to be inserted
but i_CTRL-] triggers expansion and is not inserted
into the buffer (altermo)
closes: #13853closes: #13864
Signed-off-by: altermo
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: incorrect use of W_WINROW in edit.c
Solution: compare against curwin->w_height instead
Remove incorrect use of W_WINROW
In structs.h it is mentioned that w_wrow is relative to w_winrow, so
using W_WINROW doesn't make sense when comparing with window height.
This change won't lead to any observable behavior change:
The condition intends to check if there are 'scrolloff' lines between
the current cursor when the bottom of the window. When W_WINROW(curwin)
is added to curwin->w_height - 1 - get_scrolloff_value(), the condition
is instead satisfied when the cursor is on some screen line below that
position. However,
- If 'scrolloff' is smaller than half the window height, this condition
can only be satisfied when W_WINROW(curwin) == 0. And if it is not
satisfied, update_topline() does the actual scrolling.
- If 'scrolloff' is larger than half the window height, update_topline()
will put the cursor at the center of the window soon afterwards
anyway, because set_topline() now unsets VALID_TOPLINE flag starting
from 7db7bb45b0.
To put it in another way, 7db7bb45b0
makes the update_topline() just below correct the mistakes made in this
block, so this incorrect use of W_WINROW() no longer affects observable
behavior.
closes: #12331
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: is*() and to*() function may be unsafe
Solution: Add SAFE_* macros and start using those instead
(Keith Thompson)
Use SAFE_() macros for is*() and to*() functions
The standard is*() and to*() functions declared in <ctype.h> have
undefined behavior for negative arguments other than EOF. If plain char
is signed, passing an unchecked value from argv for from user input
to one of these functions has undefined behavior.
Solution: Add SAFE_*() macros that cast the argument to unsigned char.
Most implementations behave sanely for negative arguments, and most
character values in practice are non-negative, but it's still best
to avoid undefined behavior.
The change from #13347 has been omitted, as this has already been
separately fixed in commit ac709e2fc0db6d31abb7da96f743c40956b60c3a
(v9.0.2054)
fixes: #13332closes: #13347
Signed-off-by: Keith Thompson <Keith.S.Thompson@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong scrolling in Insert mode with 'smoothscroll' at the
bottom of the window.
Solution: Don't use set_topline() when 'smoothscroll' is set.
fixes: #13612closes: #13613
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: TextChangedI may not always trigger
Solution: trigger it in more cases: for insert/
append/change operations, and when
opening a new line,
fixes: #13367closes: #13375
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem: `TextChangedI` can trigger on entering Insert mode if there
was previously a change not in Insert mode.
Solution: Make it trigger only when text is actually changed in Insert
mode.
closes: #13265closes: #13338
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem: i_CTRL-O does not reset Select Mode
Solution: Reset select mode on CTRL-O in insert mode
closes: #13001closes: #12115
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong display with wrapping virtual text or unprintable chars,
'showbreak' and 'smoothscroll'.
Solution: Don't skip cells taken by 'showbreak' in screen lines before
"w_skipcol". Combined "n_skip" and "skip_cells".
closes: #12597
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Cursor not adjusted when near top or bottom of window and
'splitkeep' is not "cursor".
Solution: Move boundary checks to outer cursor move functions, inner
functions should only return valid cursor positions. (Luuk van
Baal, closes#12480)
Problem: RedrawingDisabled not used consistently.
Solution: Avoid RedrawingDisabled going negative. Set RedrawingDisabled in
win_split_ins(). (closes#11961)
Problem: Cursor in wrong position when leaving insert mode.
Solution: Update the w_valid flags. Position the cursor also when not
redrawing. (closes#12137)
Problem: The keyboard state response may end up in a shell command.
Solution: Only request the keyboard protocol state when the typeahead is
empty, no more commands are following and not exiting. Add the
t_RK termcap entry for this.
Problem: Cannot debug the Kitty keyboard protocol with TermDebug.
Solution: Add Kitty keyboard protocol support to the libvterm fork.
Recognize the escape sequences that the protocol generates. Add
the 'keyprotocol' option to allow the user to specify for which
terminal what protocol is to be used, instead of hard-coding this.
Add recognizing the kitty keyboard protocol status.
Problem: Horizontal mouse scroll only works in the GUI.
Solution: Make horizontal mouse scroll also work in a terminal.
(Christopher Plewright, closes#11448)
Problem: Cursor position invalid when scrolling with 'smoothscroll' set.
(Ernie Rael)
Solution: Add w_valid_skipcol and clear flags when it changes. Adjust
w_skipcol after moving the cursor.
Problem: Too many #ifdefs.
Solution: Graduate the +cmdwin feature. Now the tiny and small builds are
equal, drop the small build. (Martin Tournoij, closes#11268)
Problem: With spell checking, deleting a full stop at the end of a line
does not update SpellCap at the start of the next line.
Solution: Update the next line when characters have been deleted. Also when
using undo.
Problem: With 'nosplitscroll' folds are not handled correctly.
Solution: Take care of closed folds when moving the cursor. (Luuk van Baal,
closes#11234)
Problem: After exiting Insert mode spelling is not checked in the next
line.
Solution: When spelling is enabled redraw the next line after exiting Insert
mode in case the spell highlight needs updating.