Improve backslash handling in :set option values. There is no special
handling for options supporting Windows path separators yet.
See :help option-backslash.
Remove the vimSetString syntax group. Option string values cannot be
specified with a quoted string, this is a command terminating tail
comment.
fixes: #16913closes: #17034
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Tuples were introduced in commit 9cb865e. See PR #16776.
fixes: #16965closes: #16935
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: cannot set the maximum popup menu width
(Lucas Mior)
Solution: add the new global option value 'pummaxwidth'
(glepnir)
fixes: #10901closes: #16943
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Diff mode's inline highlighting is lackluster. It only
performs a line-by-line comparison, and calculates a single
shortest range within a line that could encompass all the
changes. In lines with multiple changes, or those that span
multiple lines, this approach tends to end up highlighting
much more than necessary.
Solution: Implement new inline highlighting modes by doing per-character
or per-word diff within the diff block, and highlight only the
relevant parts, add "inline:simple" to the defaults (which is
the old behaviour)
This change introduces a new diffopt option "inline:<type>". Setting to
"none" will disable all inline highlighting, "simple" (the default) will
use the old behavior, "char" / "word" will perform a character/word-wise
diff of the texts within each diff block and only highlight the
differences.
The new char/word inline diff only use the internal xdiff, and will
respect diff options such as algorithm choice, icase, and misc iwhite
options. indent-heuristics is always on to perform better sliding.
For character highlight, a post-process of the diff results is first
applied before we show the highlight. This is because a naive diff will
create a result with a lot of small diff chunks and gaps, due to the
repetitive nature of individual characters. The post-process is a
heuristic-based refinement that attempts to merge adjacent diff blocks
if they are separated by a short gap (1-3 characters), and can be
further tuned in the future for better results. This process results in
more characters than necessary being highlighted but overall less visual
noise.
For word highlight, always use first buffer's iskeyword definition.
Otherwise if each buffer has different iskeyword settings we would not
be able to group words properly.
The char/word diffing is always per-diff block, not per line, meaning
that changes that span multiple lines will show up correctly.
Added/removed newlines are not shown by default, but if the user has
'list' set (with "eol" listchar defined), the eol character will be be
highlighted correctly for the specific newline characters.
Also, add a new "DiffTextAdd" highlight group linked to "DiffText" by
default. It allows color schemes to use different colors for texts that
have been added within a line versus modified.
This doesn't interact with linematch perfectly currently. The linematch
feature splits up diff blocks into multiple smaller blocks for better
visual matching, which makes inline highlight less useful especially for
multi-line change (e.g. a line is broken into two lines). This could be
addressed in the future.
As a side change, this also removes the bounds checking introduced to
diff_read() as they were added to mask existing logic bugs that were
properly fixed in #16768.
closes: #16881
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: if_python: no tuple data type support (after v9.1.1232)
Solution: Add support for using Vim tuple in the python interface
(Yegappan Lakshmanan)
closes: #16964
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Support for protected constructors was added in commit 7e89800.
closes: 16618
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Patch 9.1.1213 has some issues
Solution: revert it for now
This reverts commit 250739d442b51ba76589d6eb67672d95645527ec.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Synchronisation was lost in commit 0fab891 and the error propagated to
the output file in commit 5606ca5.
closes: #16889
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Only match valid predefined and option variables.
- Match scope dictionaries.
- Highlight scope prefixed variables as a scope dictionary accessor. The
vimVarScope syntax group can be linked to vimVar to disable this.
- Include support for Neovim-only predefined and option variables.
Temporary collateral damage - scope dictionaries match instead of keys
in dictionary literals.
closes: #16727
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Allow trailing backslashes in option values.
- Match :map-special modifier.
- Match :map-arguments case-sensitively.
- Remove <*Leader> from map modifier list and allow in RHS of a mapping.
closes: #16822
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: not possible to generate completion candidates using fuzzy
matching
Solution: add the 'completefuzzycollect' option for (some) ins-completion
modes (glepnir)
fixes#15296fixes#15295fixes#15294closes: #16032
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Match Vim9 function calls after ex-bar. These are also currently
matched but invalid syntax for legacy script.
fixes: #16721closes: #16747
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Contain the vimNotation syntax group, matching this at top level is
unnecessary and very slow.
The removed vimString and vimNumber definitions are broken and/or never
match. They have long been replaced by newer definitions.
closes: #16645
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Match Vim9 boolean and null literals in parenthesised expressions and
function argument lists.
- Match read-only registers in expressions.
closes: #16622
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Match variables after operators, including line continuations.
- Match option variables without leading whitespace.
- Explicitly match expression subscripts.
- Match Vim9 variables in LHS of assignments and method calls.
- Match option variables (&option) with a dedicated syntax group like
environment variables.
- Match list literals, fixes: #5830
- Match :{un}lockvar arguments.
- Match registers and environment variables in :let unpack lists.
- Match lambda expressions
- Match Vim9 scope blocks
- Match variables in :for subject
- Highlight user variables with Normal
- Improve this/super keyword matching, fixes: #15970closes: #16476
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Unable to persistently ignore events in a window and its buffers.
Solution: Add 'eventignorewin' option to ignore events in a window and buffer
(Luuk van Baal)
Add the window-local 'eventignorewin' option that is analogous to
'eventignore', but applies to a certain window and its buffers. Identify
events that should be allowed in 'eventignorewin', adapt "auto_event"
and "event_tab" to encode this information. Window context is not passed
onto apply_autocmds_group(), and when to ignore an event is a bit
ambiguous when "buf" is not "curbuf", rather than a large refactor, only
ignore an event when all windows into "buf" are ignoring the event.
closes: #16530
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Match :0debuggreedy as a special case until better range/count support
is implemented.
closes: #16572
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Match is? and isnot? operators.
- Limit other comparison operators to one match modifier rather than
two.
closes: #16482
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Match the '' escape sequence in literal strings. These were previously
ending the current string and starting another concatenated literal
string.
closes: #16415
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Always match ex-bang explicitly rather than incidentally as the ! operator.
fixes: #16221closes: #16410
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: some ex commands can be shortened
Solution: disallow shortening of :abstract, :interface and :type
(h-east)
closes: #16356
Signed-off-by: h-east <h.east.727@gmail.com>
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: hard to view an existing buffer in the preview window
Solution: add the :pbuffer command (Yinzuo Jiang)
Similar as `:pedit` and `:buffer` command. `:pbuffer` edits buffer [N]
from the buffer list in the preview window.
`:pbuffer` can also open special buffer, for example terminal buffer.
closes: #16222
Signed-off-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Fix command name termination, match bang, and allow a line-continued
argument.
closes: #15358
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: current command completion is a bit limited
Solution: Add the shellcmdline completion type and getmdcomplpat()
function (Ruslan Russkikh).
closes: #15823
Signed-off-by: Ruslan Russkikh <dvrussk@yandex.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Enable folding of class, enum and interface declarations.
- Highlight constructor names with the Function highlight group, like
other special methods.
- Mark function definitions using special method names as errors.
- Highlight :type arguments.
fixes: #14393#issuecomment-2042796198.
closes: #13810
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Allow function command modifiers.
- Match function bodies starting with empty lines.
Command modifiers reported by @Konfekt.
fixes#15671closes: #15674
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Match Vim9 boolean and null literals in expression arguments of :if,
:elseif, :while and :return.
closes: #15684
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Match -addr and -keepscript attributes and generate -addr values.
- Match attribute errors where = is specified.
- Highlight attributes with Special like other Ex command options.
- Don't highlight user-specified completion function args.
- Match :delcommand -buffer attribute.
closes: #15586
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Match '(,'),'[,'],'{, and '} marks in Ex command ranges.
Thanks to Maxim Kim.
Fixes#15332.
Closes#15337.
Signed-off-by: Maxim Kim <habamax@gmail.com>
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Match :loadkeymap after Ex colons and bars.
Don't generate :loadkeymap as it is matched with a custom syntax group.
closes: #15554
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The end marker is not required to match the indent of :let when "trim"
is specified, it may also appear without leading whitespace as normal.
closes: #15564
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
* Improve heredoc handling
- Support "trim" for all the embedded scripts.
- Check the indent of "trim" for "let" and all the embedded scripts.
* Update missing part of vim.vim.base in the commit
d164f2a521f8e52e587727657fb1c19e9a25f32a.
* Update gen_syntax_vim.vim to catch up with 9.1.0685's source code.
closes: #15542
Signed-off-by: K.Takata <kentkt@csc.jp>
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The end marker must appear on line of its own without any trailing
whitespace.
Whitespace is incorrectly allowed before all end markers. Limiting this
only to heredocs where "trim" was specified, and with the correct
indent, is currently an intractable problem given that contained syntax
groups (in this case :let) cannot be limited to start patterns.
Highlight interpolated expressions when "eval" is specified.
cloess: #15511
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Match bang, "all" and "termcap" options, and trailing command
separator "|".
- Highlight set assignment operators.
- Match multiline :set and multiline option values.
- Mention the newer "0o" octal prefix at :help :set=.
closes: #15329
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Match :map ( RHS properly.
Only match ! after :map, :noremap, :unmap and :mapclear.
closes: #15297
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Match types in Vim9 variable declarations.
Match Vim9 boolean and null literals. These are not matched in all
contexts yet.
related: #15277
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
