Problem: [security]: overflow in shift_line
Solution: allow a max indent of INT_MAX
[security]: overflow in shift_line
When shifting lines in operator pending mode and using a very large
value, we may overflow the size of integer. Fix this by using a long
variable, testing if the result would be larger than INT_MAX and if so,
indent by INT_MAX value.
Special case: We cannot use long here, since on 32bit architectures (or
on Windows?), it typically cannot take larger values than a plain int,
so we have to use long long count, decide whether the resulting
multiplication of the shiftwidth value * amount is larger than INT_MAX
and if so, we will store INT_MAX as possible larges value in the long
long count variable.
Then we can safely cast it back to int when calling the functions to set
the indent (set_indent() or change_indent()). So this should be safe.
Add a test that when using a huge value in operator pending mode for
shifting, we will shift by INT_MAX
closes: #13535
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: overflow in get_number
Solution: Return 0 when the count gets too large
[security]: overflow in get_number
When using the z= command, we may overflow the count with values larger
than MAX_INT. So verify that we do not overflow and in case when an
overflow is detected, simply return 0
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: overflow in ex address parsing
Solution: Verify that lnum is positive, before substracting from
LONG_MAX
[security]: overflow in ex address parsing
When parsing relative ex addresses one may unintentionally cause an
overflow (because LONG_MAX - lnum will overflow for negative addresses).
So verify that lnum is actually positive before doing the overflow
check.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: overflow in nv_z_get_count
Solution: break out, if count is too large
When getting the count for a normal z command, it may overflow for large
counts given. So verify, that we can safely store the result in a long.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: overflow with count for :s command
Solution: Abort the :s command if the count is too large
If the count after the :s command is larger than what fits into a
(signed) long variable, abort with e_value_too_large.
Adds a test with INT_MAX as count and verify it correctly fails.
It seems the return value on Windows using mingw compiler wraps around,
so the initial test using :s/./b/9999999999999999999999999990 doesn't
fail there, since the count is wrapping around several times and finally
is no longer larger than 2147483647. So let's just use 2147483647 in the
test, which hopefully will always cause a failure
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: FPE in adjust_plines_for_skipcol
Solution: don't divide by zero, return zero
Prevent a floating point exception when calculating w_skipcol (which can
happen with a small window when the number option is set and cpo+=n).
Add a test to verify
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: Use-after-free in win_close()
Solution: Check window is valid, before accessing it
If the current window structure is no longer valid (because a previous
autocommand has already freed this window), fail and return before
attempting to set win->w_closing variable.
Add a test to trigger ASAN in CI
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Skipcol is not reset when topline changed scrolling cursor to top
Solution: reset skipcol
closes: #13528closes: #13532
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: wast filetype should be replaced by wat filetype
Solution: start using the official wat filetype name
runtime: rename `wast` filetype to `wat` (Wasm text format)
The problem is the name of the current filetype wast. When the plugin
was initially created, the file extension for Wasm text format was not
fixed and .wast was more popular.
However, recently .wat became the official file extension for
WebAssembly text (WAT) format and .wast is now a file extension for the
unofficial WAST format, which is a superset of .wat for the convenience
to describe the Wasm specification conformance tests.
https://webassembly.js.org/docs/contrib-wat-vs-wast.html
However for now, let's keep using the `wat` filetype even for the .wast
extension, so that we at least do not lose the filetype settings and
syntax highlighting. This can be adjusted later, if it turns out to have
a separate need for.
closes: #13533
Signed-off-by: rhysd <lin90162@yahoo.co.jp>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: recursive callback may cause issues on some archs
Solution: Decrease the limit drastically to 20
Recursive callback limit causes problems on some architectures
Since commit 47510f3d6598a1218958c03ed11337a43b73f48d we have a test
that causes a recursive popup callback function to be executed. However
it seems the current limit of 'maxfuncdepth' option value is still too
recursive for some 32bit architectures (e.g. 32bit ARM).
So instead of allowing a default limit of 100 (default value for
'maxfuncdepth'), let's reduce this limit to 20. I don't think there is a
use case where one would need such a high recursive callback limit and a
limit of 20 seems reasonable (although it is currently hard-coded).
closes: #13495closes: #13502
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: matchparen highlight not cleared in completion mode
Solution: Clear matchparen highlighting in completion mode
Remove hard-coded hack in insexpand.c to clear the :3match before
displaying the completion menu.
Add a test for matchparen highlighting. While at it, move all test tests
related to the matchparen plugin into a separate test file.
closes: #13493closes: #13524
Signed-off-by: Christian Brabandt <cb@256bit.org>
// related #12589
// that should be the last chat (I) with Bram, r.i.p
Signed-off-by: shane.xb.qian <shane.qian@foxmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: CI: test_termdebug may still fail
Solution: use term_wait() to make it more robust
closes: #13529
Signed-off-by: shane.xb.qian <shane.qian@foxmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: CI: test_termdebug fails
Solution: only test for a changed winlayout, if the window
width actually changed
Also, include an unrelated comment (which doesn't warrant its own patch
number)
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: No filetype support for xcompose files
Solution: Add filetype detection
closes: #13508
Signed-off-by: ObserverOfTime <chronobserver@disroot.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: No support for cypher files
Solution: Add cypher filetype detection
Cypher query language support to work with (mostly) graph databases.
Already existing lsp support in Neovim's nvim-lspconfig:
https://github.com/neovim/nvim-lspconfig/blob/master/doc/server_configurations.md#cypher_lscloses: #13516
Signed-off-by: Gerrit Meier <meistermeier@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: statusline may look different than expected
Solution: do not check for highlighting of stl and stlnc characters
statusline fillchar may be different than expected
If the highlighting group for the statusline for the current window
|hl-StatusLine| or the non-current window |hl-StatusLineNC| are cleared
(or do not differ from each other), than Vim will use the hard-coded
fallback values '^' (for the non-current windows) or '=' (for the
current window). I believe this was done, to make sure the statusline
will always be visible and be distinguishable from the rest of the
window.
However, this may be unexpected, if a user explicitly defined those
fillchar characters just to notice that those values are then not used
by Vim.
So, let's assume users know what they are doing and just always return
the configured stl and stlnc values. And if they want the statusline to
be non-distinguishable from the rest of the window space, so be it. It
is their responsibility and Vim shall not know better what to use.
fixes: #13366closes: #13488
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: need more assignment tests
Solution: Add test for using different types in assignment, function
arguments and return values
closes: #13491
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Unsupported option causes rest of modeline test to be skipped.
Solution: Revert the change from patch 8.2.1432.
closes: #13499closes: #13500
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: cannot convert list to string using +=
(after 9.0.2072)
Solution: convert dict index to string later in compile_member()
fixes: #13485closes: #13486
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: complete_info() skips entries with 'noselect'
Solution: Check, if first entry is at original text state
Unfortunately, Commit daef8c74375141974d61b85199b383017644978c
introduced a regression, that when ':set completeopt+=noselect' is set
and no completion item has been selected yet, it did not fill the
complete_info['items'] list.
This happened, because the current match item did not have the
CP_ORIGINAL_TEXT flag set and then the cp->prev pointer did point to the
original flag item, which caused the following while loop to not being
run but being skipped instead.
So when the 'noselect' is set, only start with to the previous selection
item, if the initial completion item has the CP_ORIGINAL_TEXT flag set,
else use the 2nd previous item instead.
fixes: #13451closes: #13452
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: sound_playfile() fails when using powershell
Solution: quote filename using doublequotes, don't escape filename,
because it doesn't use the shell
Avoiding powershell escaping because mci open command doesn't support
single quoted filenames: open 'C:\whatever\sound.wav' is not valid.
closes: #13471
Signed-off-by: GuyBrush <miguel.barro@live.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: code cleanup for option callbacks needed
Solution: remove flag os_doskip, it's not necessary, as we can check,
whether an error message was returned
Remove unnecessary field os_doskip
Callback functions for boolean options set os_doskip immediately before
returning an error message, so os_doskip isn't actually needed.
closes: #13461
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: abstract can be used in interface
Solution: Disallow the use of abstract in an interface
fixes: #13456closes: #13464
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Perl: xsubpp may be in non-standard location
Solution: Add --with-subpp configure option
configure.ac: Add --with-xsubpp configure option
Some environments (such as flatpaks) cannot count on xsubpp being
in the common Perl directory, so a configure option should be used for
clean solution.
closes: #13470
Signed-off-by: Zdenek Dohnal <zdohnal@redhat.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: test_channel may fail because of IPv6 config issues
Solution: Catch and skip the test, if getaddrinfo() fails with
'Address family not supported'
Mark tests as skipped when ch_open encounters E901
On some of the Debian build systems, the IPv6 channel tests fail because
`ch_open('[::1]:<port>', ...)` raises the error "E901: getaddrinfo() in
channel_open(): Address family for hostname not supported".
This appears to happen because getaddrinfo() can't perform the reverse
lookup for the ::1, which is a config issue on that system. Therefore,
instead of reporting a test failure, mark the test as skipped due to the
bad network config
closes: #13473
Signed-off-by: James McCoy <jamessan@jamessan.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: With 'smoothscroll' set, "w_skipcol" is not reset when unsetting 'wrap'.
Resulting in incorrect calculation of the cursor position.
Solution: Reset "w_skipcol" when unsetting 'wrap'.
fixes: #12970closes: #13439
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: vim9_script test too large
Solution: split vim9 type alias test into
separate test file
Move type alias tests to a separate test file
closes: #13447
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: several problems with type aliases
Solution: Check for more error conditions, add tests,
fix issues
Check for more error conditions and add additional tests
fixes #13434
fixes #13437
fixes #13438closes#13441
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: No support for type aliases
Solution: Implement :type command
A type definition is giving a name to a type specification. This also known
type alias.
:type ListOfStrings = list<string>
The type alias can be used wherever a built-in type can be used. The type
alias name must start with an upper case character.
closes: #13407
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: TextChangedI may not always trigger
Solution: trigger it in more cases: for insert/
append/change operations, and when
opening a new line,
fixes: #13367closes: #13375
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem: Completion menu may be wrong
Solution: Check for the original direction of the completion menu,
add more tests, make it work with 'noselect'
completion: move in right direction when filling completion_info()
When moving through the insert completion menu and switching directions,
we need to make sure we start at the correct position in the list and
move correctly forward/backwards through it, so that we do not skip
entries and the selected item points to the correct entry in the list
of completion entries generated by the completion_info() function.
The general case is this:
1) CTRL-X CTRL-N, we will traverse the list starting from
compl_first_match and then go forwards (using the cp->next pointer)
through the list (skipping the very first entry, which has the
CP_ORIGINAL_TEXT flag set (since that is the empty/non-selected entry
2) CTRL-X CTRL-P, we will traverse the list starting from
compl_first_match (which now points to the last entry). The previous
entry will have the CP_ORIGINAL_TEXT flag set, so we need to start
traversing the list from the second prev pointer.
There are in fact 2 special cases after starting the completion menu
with CTRL-X:
3) CTRL-N and then going backwards by pressing CTRL-P again.
compl_first_match will point to the same entry as in step 1 above,
but since compl_dir_foward() has been switched by pressing CTRL-P
to backwards we need to pretend to be in still in case 1 and still
traverse the list in forward direction using the cp_next pointer
4) CTRL-P and then going forwards by pressing CTRL-N again.
compl_first_match will point to the same entry as in step 2 above,
but since compl_dir_foward() has been switched by pressing CTRL-N
to forwards we need to pretend to be in still in case 2 and still
traverse the list in backward direction using the cp_prev pointer
For the 'noselect' case however, this is slightly different again. When
going backwards, we only need to go one cp_prev pointer back. And
resting of the direction works again slightly different. So we need to
take the noselect option into account when deciding in which direction
to iterate through the list of matches.
related: #13402
related: #12971closes: #13408
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: no nr2str conversion in list-unpack
Solution: Generate 2STRING instruction to convert dict index to string
Generate instruction to convert dict index to a string
fixes: #13417closes: #13424
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: objdump files not recognized
Solution: detect *.objdump files, add a filetype plugin
Added the objdump file/text format
closes: #13425
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Colin Kennedy <colinvfx@gmail.com>
Problem: [security] disallow setting env in restricted mode
Solution: Setting environment variables in restricted mode could
potentially be used to execute shell commands. Disallow this.
restricted mode: disable allow setting of environment variables
Setting environment variables in restricted mode, may have some unwanted
consequences. So, for example by setting $GCONV_PATH in restricted mode
and then calling the iconv() function, one may be able to execute some
unwanted payload, because the `iconv_open()` function internally uses
the `$GCONV_PATH` variable to find its conversion data.
So let's disable setting environment variables, even so this is no
complete protection, since we are not clearing the existing environment.
I tried a few ways but wasn't successful :(
One could also argue to disable the iconv() function completely in
restricted mode, but who knows what other API functions can be
influenced by setting some other unrelated environment variables.
So let's leave it as it is currently.
closes: #13394
See: https://huntr.com/bounties/b0a2eda1-459c-4e36-98e6-0cc7d7faccfe/
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: possible to escape bracketed paste mode with Ctrl-C
Solution: Do not handle Ctrl-C specially when key_protocol
is in use, makes bracketed paste mode more robust
When a key protocol is in use Ctrl-C will be sent as an escape sequence,
but a raw Ctrl-C can be sent when pasting data. Pass this through, so
that a Ctrl-C can be pasted and won't result in exiting insert mode
(where the rest of the pasted keys can cause all kind of nasty
side-effects).
Many terminals will strip control characters in paste data (and xterm
will strip ^C since version 388), but this provides some defense in
depth if users change settings like xterm's allowPasteControls.
closes: #13398
Signed-off-by: David Leadbeater <dgl@dgl.cx>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: [security] overflow in :history
Solution: Check that value fits into int
The get_list_range() function, used to parse numbers for the :history
and :clist command internally uses long variables to store the numbers.
However function arguments are integer pointers, which can then
overflow.
Check that the return value from the vim_str2nr() function is not larger
than INT_MAX and if yes, bail out with an error. I guess nobody uses a
cmdline/clist history that needs so many entries... (famous last words).
It is only a moderate vulnerability, so impact should be low.
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-q22m-h7m2-9mgm
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: xxd: coloring was disabled on Cygwin
Solution: don't include WIN32
xxd: Fix that color was disabled on Cygwin
"windows.h" was unintentionally included on Cygwin since 9.0.1834.
This accidentally disabled coloring on Cygwin.
Stop including "windows.h" on Cygwin.
closes: #13414
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
