Fix a few minor issues:
1. filename with whitespaces issue should be fixed now, fixes: #12357
2. ":Termdebug args" should work now, fixes: #15254closes: #15261
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Ubaldo Tiberi <ubaldo.tiberi@google.com>
This is a partial revert of 8f3f58f since this issue was fixed in #15120.
related: #15120
Signed-off-by: Mohamed Akram <mohd.akram@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: *.pdf_tex files are not recognized
Solution: Detect '*.pdf_tex' files as tex filetype
(Jonas Dujava)
Those files are generated by inkscape, when exporting, see e.g.
https://inkscape.org/doc/inkscape-man.htmlcloses: #15250
Signed-off-by: Jonas Dujava <jonas.dujava@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: style: Various lines are indented inconsistently
Solution: Retab these lines and correct some comments.
(zeertzjq)
closes: #15259
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: ex: wrong handling of commands after bar
Solution: for :append, :insert and :change use the text after the bar
as input for those commands. This is what POSIX requests.
(Mohamed Akram)
See the POSIX Spec:
https://pubs.opengroup.org/onlinepubs/9699919799/utilities/ex.html#tag_20_40_13_03
Section 12.c
closes: #15229
Signed-off-by: Mohamed Akram <mohd.akram@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: ex: no implicit print for single addresses
Solution: explicitly print even during single addresses,
as requested by POSIX (Mohamed Akram)
See the POSIX behaviour here:
https://pubs.opengroup.org/onlinepubs/9699919799/utilities/ex.html#tag_20_40_13_03
Section 6b
closes: #15230
Signed-off-by: Mohamed Akram <mohd.akram@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: .pro file detection for Prolog is broken
Solution: fixed the regex to only match on the tested
cases (igna_martinoli)
fixes: #10835closes: #15206
Signed-off-by: igna_martinoli <ignamartinoli@protonmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Taken from excerpts of the Python ftplugin and adapted,
indent script simply sources the python indent script.
closes: #15171
Signed-off-by: Riley Bruins <ribru17@hotmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: id() can be made faster
Solution: don't use printf(), use clever shift of pointer
(Ernie Rael)
closes: #15207
Signed-off-by: Ernie Rael <errael@raelity.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Added overlay, tracefs and fixed the "none" keyword in the fstab syntax definition.
closes: #15217
Signed-off-by: Radu Dineiu <radu.dineiu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: bindtextdomain() does not indicate an error
(after v9.1.509)
Solution: return false on failure (OOM).
(Chris van Willegen)
closes: #15116
Signed-off-by: Christ van Willegen <cvwillegen@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: translation of vim scripts can be improved
(after v9.1.0509)
Solution: improve documentation, add tests, include missing
libraries for the Windows CI
(RestorerZ)
closes: #15100
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: prolog detection can be improved
Solution: Improved the Prolog file detection regex and added tests for
all cases. (igna_martinoli)
fixes: #10835closes: #15206
Signed-off-by: igna_martinoli <ignamartinoli@protonmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: moving in the buffer list doesn't work as documented
(SenileFelineS)
Solution: Skip non-help buffers, when run from normal buffers, else
only move from help buffers to the next help buffer (LemonBoy)
As explained in the help section for :bnext and :bprev the commands
should jump from help buffers to help buffers (and from regular ones to
regular ones).
fixes: #4478closes: #15198
Signed-off-by: LemonBoy <thatlemon@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: angular ft detection is still problematic
(after 9.1.0551)
Solution: detect htmlangular filetype only by inspecting the content,
do not try to determine it from a generic name like
'*.component.html'
For the reasons mentioned here:
https://github.com/vim/vim/pull/13594#issuecomment-1834465890
related: #15190
related: #13594
related: #13604
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: :bw leaves jumplist and tagstack data around
(Paul "Joey" Clark)
Solution: Wipe jumplist and tagstack references to the wiped buffer
(LemonBoy)
As documented the :bwipeout command brutally deletes all the references
to the buffer, so let's make it delete all the entries in the jump list
and tag stack referring to the wiped-out buffer.
fixes: #8201closes: #15185
Signed-off-by: LemonBoy <thatlemon@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: htmlangular files are not properly detected
Solution: Use the new htmlangular filetype for angular files, because
since angular v17, those are no longer valid HTML files.
(Dennis van den Berg)
Since Angular 17, the new Control Flow Syntax is not valid HTML. This PR
adds a new filetype detection for the HTML templates of Angular.
It first checks the filename. The Angular convention is to use
*.component.html for the template. However, this is not mandatory.
If the filename does not match, it will check the contents of the file
if it contains:
- One of the Control-Flow blocks: @if, @for, @switch, @defer
- A structural directive: *ngIf, *ngFor, *ngSwitch, *ngTemplateOutlet
- Builtin Angular elements: ng-template or ng-content
- String interpolation: {{ something }}
This enables the Angular LSP to attach only to htmlangular filetypes, as
well as language parsers, such as tree-sitter.
closes: #15190
Signed-off-by: Dennis van den Berg <dennis.vandenberg@nedap.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: antlr4 files are not recognized
Solution: Detect '*.g4' as antlr4 filetype, include a simple antlr4
syntax and filetype plugin (Yinzuo Jiang)
closes: #15191
Signed-off-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: fuzzycollect regex based completion not working as expected
Solution: Revert Patch v9.1.0503 (glepnir)
closes: #15192
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: it's not possible to get a unique id for some vars
Solution: Add the id() Vim script function, which returns a unique
identifier for object, dict, list, job, blob or channel
variables (Ernie Rael)
fixes: #14374closes: #15145
Signed-off-by: Ernie Rael <errael@raelity.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: No way to get the arity of a Vim function
(Austin Ziegler)
Solution: Enhance get() Vim script function to return the function
argument info using get(func, "arity") (LemonBoy)
fixes: #15097closes: #15109
Signed-off-by: LemonBoy <thatlemon@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The original shell command could set the VIMRUNTIME variable to an
invalid path.
- since v9.0.0592 trailing spaces were typically added making the
path invalid. (I observed that spaces were added if the length of
the path wasn't equal to one less than an integer multiple of the
number of display columns.)
- newline character/s would be added, making the path invalid, if
the path was longer than the number of display columns.
The new command is shorter than the original command.
closes: #15184
Signed-off-by: Shane Harper <shane@shaneharper.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
This one just sources the objc.vim ftplugin.
closes: #15170
Signed-off-by: Riley Bruins <ribru17@hotmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Adds ftplugin support for tf (TinyFugue). Comment support taken from
[here](1e8ac0bb01/src/command.c (L568))
closes: #15168
Signed-off-by: Riley Bruins <ribru17@hotmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
This one just sources from the SQL ftplugin. Without this, *.mysql
files don't inherit the common SQL settings.
closes: #15166
Signed-off-by: Riley Bruins <ribru17@hotmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Kivy uses "#:" for preprocessing commands (like "#:import ...") which
were overridden by the comment syntax. This has been changed, and a
commentstring has been added.
closes: #15163
Signed-off-by: Riley Bruins <ribru17@hotmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
