Problem: no overflow check for string formatting
Solution: Check message formatting function for overflow.
(Chris van Willegen)
closes: #13799
Signed-off-by: Christ van Willegen <cvwillegen@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: E1513 might be confusing
(Christoph Thoma)
Solution: reword error message, fix test to not
depend on the actual message
fixes: #14189
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: winframe functions incorrectly recompute window positions if
the altframe wasn't adjacent to the closed frame, which is
possible if adjacent windows had 'winfix{width,height}' set.
Solution: recompute for windows within the parent of the altframe and
closed frame. Skip this (as before) if the altframe was
top/left, but only if adjacent to the closed frame, as
positions won't change in that case. Also correct the return
value documentation for win_screenpos. (Sean Dewar)
The issue revealed itself after removing the win_comp_pos call below
winframe_restore in win_splitmove. Similarly, wrong positions could result from
windows closed in other tabpages, as win_free_mem uses winframe_remove (at least
until it is entered later, where enter_tabpage calls win_comp_pos).
NOTE: As win_comp_pos handles only curtab, it's possible via other means for
positions in non-current tabpages to be wrong (e.g: after changing 'laststatus',
'showtabline', etc.). Given enter_tabpage recomputes it, maybe it's intentional
as an optimization? Should probably be documented in win_screenpos then, but I
won't address that here.
closes: #14191
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: more places exist where curwin == prevwin, and it may even be
expected in some cases.
Solution: revert v9.1.0001, but document that it's possible instead.
(Sean Dewar)
I've had a change of heart for the following reasons:
- A quick 'n dirty [GitHub code
search](https://github.com/search?q=%2F%28winnr%5C%28%5C%29%5Cs*%3D%3D%5Cs*winnr%5C%28%5B%27%22%5D%23%5B%27%22%5D%5C%29%7Cwinnr%5C%28%5B%27%22%5D%23%5B%27%22%5D%5C%29%5Cs*%3D%3D%5Cs*winnr%5C%28%5C%29%29%2F&type=code)
reveals some cases where it's expected in the wild.
Particularly, it made me aware `winnr() == winnr('#')` is possible when curwin
is changed temporarily during the evaluation of a &statusline expression item
(`%{...}`), and is used to show something different on the statusline
belonging to the previous window; that behaviour wasn't changed in v9.1.0001,
but it means curwin == prevwin makes sense in some cases.
- The definition and call sites of back_to_prevwin imply some expectation that
prevwin == wp (== curwin) is possible, as it's used to skip entering the
prevwin in that case.
- Prior to v9.1.0001, `:wincmd p` would not beep in the case that was patched in
v9.1.0001, but now does. That resulted in #14047 being opened, as it affected
the CtrlP plugin.
I find it odd that `:wincmd p` had cases where it wouldn't beep despite doing
nothing, but it may be preferable to keep things that way (or instead also
beep if curwin == prevwin, if that's preferred).
- After more digging, I found cases in win_free_mem, enter_tabpage,
aucmd_restbuf and qf_open_new_cwindow where curwin == prevwin is possible
(many of them from autocommands). Others probably exist too, especially in
places where curwin is changed temporarily.
fixes: #14047closes: #14186
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Make it not sound like a buffer option.
- "!" is called a modifier, not an option.
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Duplicate assignment in f_getregion().
Solution: Remove the duplicate assignment. Also improve getregion()
docs wording and fix an unrelated typo (zeertzjq)
closes: #14154
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: can only call getregion() for current buffer
Solution: Allow to retrieve selections from different buffers
(Shougo Matsushita)
closes: #14131
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: several minor 'winfixbuf' issues exist, mostly relating to the
quickfix list
Solution: address them and adjust tests. Retab and reflow a few things too.
(Sean Dewar)
Things touched include:
- Replace the semsgs with gettext'd emsgs.
- Handle window switching in ex_listdo properly, so curbuf and curwin
are kept in-sync and trigger autocommands; handle those properly.
- Don't change the list entry index in qf_jump_edit_buffer if we fail
due to 'wfb' (achieved by returning FAIL; QF_ABORT should only be used
if the list was changed).
- Make qf_jump_edit_buffer actually switch to prevwin when using `:cXX`
commands **outside** of the list window if 'wfb' is set in curwin.
Handle autocommands properly in case they mess with the list.
NOTE: previously, it seemed to split if 'wfb' was set, but do nothing
and fail if prevwin is *valid*. This behaviour seemed strange, and maybe
unintentional? Now it aligns more with what's described for the `:cXX`
commands in the original PR description when used outside a list window,
I think.
- In both functions, only consider prevwin if 'wfb' isn't set for it;
fallback to splitting otherwise.
- Use win_split to split. Not sure if there was a specific reason for
using ex_splitview. win_split is simpler and respects modifiers like
:vertical that may have been used. Plus, its return value can be checked
for setting opened_window in qf code (technically win_split_ins autocmds
could immediately close it or change windows, in which the qf code might
close some other window on failure; it's already the case elsewhere,
though).
closes: #14142
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: can't call internal methods with objects
Solution: Add support for empty(), len() and string() function
calls for objects (Yegappan Lakshmanan)
closes: #14129
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot keep a buffer focused in a window
(Amit Levy)
Solution: Add the 'winfixbuf' window-local option
(Colin Kennedy)
fixes: #6445closes: #13903
Signed-off-by: Colin Kennedy <colinvfx@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Update Last-Change Header for netrw and doc/indent.txt, fix a trailing
whitespace in indent.txt and make CI happy.
Signed-off-by: Christian Brabandt <cb@256bit.org>
There have been many complaints about Yaml indenting too much, because
it considers values to be multi-line by default, which leads to
unintended indenting for (apparently most) users.
So let's hide this feature behind the new feature flag, keep it
simple and prefer single line value key pairs by default.
If you want the old behaviour, set the following value: >
:let g:yaml_indent_multiline_scalar = 1
If not set, it will indent the same as the previous line.
closes#13845
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: getregion() can be improved (after v9.1.120)
Solution: change getregion() implementation to use pos as lists and
one optional {opt} dictionary (Shougo Matsushita)
Note: The following is a breaking change!
Currently, the getregion() function (included as of patch v9.1.120) takes
3 arguments: the first 2 arguments are strings, describing a position,
arg3 is the type string.
However, that is slightly inflexible, there is no way to specify
additional arguments. So let's instead change the function signature to:
getregion(pos1, pos2 [, {Dict}]) where both pos1 and pos2 are lists.
This is slightly cleaner, and gives us the flexibility to specify
additional arguments as key/value pairs to the optional Dict arg.
Now it supports the "type" key to specify the selection type
(characterwise, blockwise or linewise) and now in addition one can also
define the selection type, independently of what the 'selection' option
actually is.
Technically, this is a breaking change, but since the getregion()
Vimscript function is still quite new, this should be fine.
closes: #14090
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
methods
Problem: Vim9: need more test for exists()
Solution: Add test for exists() with class/objct variables and methods
(Yegappan Lakshmanan)
closes: #14088
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: font ligatures don't render correctly in the Win32 GUI-version
of gvim even when set rop=type:directx is used. Setting
guiligatures also doesn't make any difference. This leads to
broken font ligatures when the cursor passes through them. It
does not recover from this, and they remain broken until you
re-render the whole buffer (e.g. by using Ctrl+L).
Solution: the problem is that we only re-draw the current and previous
character in gui_undraw_cursor() and only have the special case
for GTK when it comes to rendering ligatures. So let's enable
gui_adjust_undraw_cursor_for_ligatures() to also happen for
Win32 GUI if guiligatures is setup correctly (all this does is
expand the range of gui_undraw_cursor() with ligature characters).
related: #9181
related: #12901closes: #14084
Signed-off-by: Erik S. V. Jansson <caffeineviking@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Internal error when passing mark in another buffer to
getregion().
Solution: Don't allow marks in another buffer (zeertzjq)
closes: #14076
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Internal error when passing mark in another buffer to getregion()
While adding to the documentation, also mention the rolled-back key-translation
strategy in version9.txt
closes: #14069
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Some minor issues with the getregion() function
Solution: Fix examples in the help, use OP_NOP op_type and MBLOCK
as motion_type in f_getreg(), update vim syntax to
for getregion() (Maxim Kim)
```
:xnoremap <CR>
\ <Cmd>echow getregion('v', '.', mode())<CR>
```
`echo` while in visual mode has no visible effect, thus people trying
example might be frustrated as it looks like nothing happens.
So the option is to change it to `echow` or `echom`.
With `echom` it is again has no visible effect but one can at least inspect `:messages`.
On the other hand `echow` showes selected text in a popup window.
```
Can also be used as a |method|: >
'.'->getregion("'a', 'v')
```
Here is the typo, which makes example invalid, should be `("'a", ...`
closes: #14064
Signed-off-by: Maxim Kim <habamax@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: hard to get visual region using Vim script
Solution: Add getregion() Vim script function
(Shougo Matsushita, Jakub Łuczyński)
closes: #13998closes: #11579
Co-authored-by: =?UTF-8?q?Jakub=20=C5=81uczy=C5=84ski?= <doubleloop@o2.pl>
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: win_splitmove fires WinNewPre and possibly WinNew when moving
windows, even though no new windows are created.
Solution: don't fire WinNew and WinNewPre when inserting an existing
window, even if it isn't the current window. Improve the
accuracy of related documentation. (Sean Dewar)
Likewise, before this patch, WinClosed was not fired anyway (even for :wincmd
H/J/K/L, which also didn't fire WinNew, but did still fire WinNewPre), despite
documentation saying windows are "closed". Note that :wincmd T actually indeed
works by creating a new window (and closing the old one), unlike the others.
This also fixes issues where WinNewPre is fired when split-moving while curwin
doesn't yet have a frame or entry in the window list, causing many things to not
work (it's not considered valid at that point). This was guaranteed when using
:wincmd H/J/K/L.
Because WinNewPre is no longer fired when split-moving, this makes restoring the
previous window layout on failure easier, as we can be sure that frames are not
resized from WinNewPre autocommands if win_split_ins fails. This allows us to
use a different strategy in the following commit.
--
In my opinion, this leaves questions about the current usefulness of WinNewPre.
A motivation described in #10635 states how creating a new window can steal room
from other windows, and how WinNewPre will be useful for detecting that, but
this is also true when inserting an existing window, which now doesn't fire it.
Maybe the autocommand should be changed to have a better name?
There are also other issues I found with the current implementation of WinNewPre
that need addressing:
- it allows switching windows and tabpages, which can cause incorrect windows to
be split/moved, and big problems when switching tabpages.
- it fires before win_split_ins checks for room, before it makes any changes to
window sizes or before it considers allocating a new window. This should be
changed or documented.
I hope to address some of this stuff in a different PR, if possible.
related: #14038
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Using freed memory with full tag stack and user data
(Konstantin Khlebnikov)
Solution: Clear the user data pointer of the newest entry.
(zeertzjq, Konstantin Khlebnikov)
fixes: neovim/neovim#27498
closes: #14053
Co-authored-by: Konstantin Khlebnikov koct9i@gmail.com
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Konstantin Khlebnikov koct9i@gmail.com
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Not able to use diff() with 'diffexpr'
(rickhowe, after v9.1.0096)
Solution: Use a default context length of 0, update diff() help text,
add a test for using diff() with 'diffexpr'
(Yegappan Lakshmanan)
closes: #14013
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: diff() function uses 'diffexpr'
(rickhowe)
Solution: Make diff() always use internal diff(), add support for
unified diff context length, sort diff() options in help
(Yegappan Lakshmanan)
fixes: #13989closes: #14010
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Make doc list-concatenation more clear as for += and extend().
1. describe `+=` for list-concatenation more accurately
2. add `extend()` example for list-concatenation
3. Fix CI errors for missing helptags reference |+=|
closes: #13983
Signed-off-by: qeatzy <qeatzy@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: unexpected error for modifying final list using += operator
(Ernie Rael)
Solution: Allow List value modification of a final variable using +=
operator
(Yegappan Lakshmanan)
fixes: #13745fixes: #13959closes: #13962
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Added a syntax region for command blocks so that the highlighting of
`::` comments in them can be controlled. The `dosbatch_colons_comment`
variable now controls if all `::` comments in a code block are
highlighted as comments or errors. A `::` comment at the end of a
command block is always highlighted as an error.
This re-enables the highlighting of `::` comments in `.bat` files as
requested in #13666, while allowing control of highlighting them in
command blocks requested in #11778 and first attempted in #11980.
related: #11980fixes: #13666
Co-authored-by: Mike Williams <mikew@globalgraphics.com>
Signed-off-by: Mike Williams <mikew@globalgraphics.com>
Signed-off-by: mevanlc <mevanlc@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Vim will lookup color names from the v:colornames dictionary by its
lower case color name. So when sourcing the v:colornames dictionary,
make sure to convert upper case color names to lower case.
Also, while at it, mention in the documentation, that the dictionary
should contain lower case names only.
fixes: #13976
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Need a diff() Vim script function
Solution: Add the diff() Vim script function using the
xdiff internal diff library, add support for
"unified" and "indices" mode.
(Yegappan Lakshmanan)
fixes: #4241closes: #12321
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: No Wayland support
Solution: Add Wayland UI support
(lilydjwg)
closes: #9639
Signed-off-by: lilydjwg <lilydjwg@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: No event is triggered before creating a window.
(Sergey Vlasov)
Solution: Add the WinNewPre event (Sergey Vlasov)
fixes: #10635closes: #12761
Signed-off-by: Sergey Vlasov <sergey@vlasov.me>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot map Super Keys in GTK UI
(Casey Tucker)
Solution: Enable Super Key mappings in GTK using <D-Key>
(Casey Tucker)
As a developer who works in both Mac and Linux using the same keyboard,
it can be frustrating having to remember different key combinations or
having to rely on system utilities to remap keys.
This change allows `<D-z>` `<D-x>` `<D-c>` `<D-v>` etc. to be recognized
by the `map` commands, along with the `<D-S-...>` shifted variants.
```vimrc
if has('gui_gtk')
nnoremap <D-z> u
nnoremap <D-S-Z> <C-r>
vnoremap <D-x> "+d
vnoremap <D-c> "+y
cnoremap <D-v> <C-R>+
inoremap <D-v> <C-o>"+gP
nnoremap <D-v> "+P
vnoremap <D-v> "-d"+P
nnoremap <D-s> :w<CR>
inoremap <D-s> <C-o>:w<CR>
nnoremap <D-w> :q<CR>
nnoremap <D-q> :qa<CR>
nnoremap <D-t> :tabe<CR>
nnoremap <D-S-T> :vs#<CR><C-w>T
nnoremap <D-a> ggVG
vnoremap <D-a> <ESC>ggVG
inoremap <D-a> <ESC>ggVG
nnoremap <D-f> /
nnoremap <D-g> n
nnoremap <D-S-G> N
vnoremap <D-x> "+x
endif
```
closes: #12698
Signed-off-by: Casey Tucker <dctucker@hotmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Win32 Keyboard handling is sub-optimal and has
many issues with international keyboards
(risa2000) (after v8.2.4807)
Solution: soft-rollback the change, allow the user to select
a suitable key-translation strategy
(Anton Sharonov)
Read about the details in the help:
:h w32-experimental-keycode-trans-strategy
fixes: #10615fixes: #12595closes: #12752
Signed-off-by: Anton Sharonov <anton.sharonov@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
