Problem: cannot set special highlight kind in popupmenu
Solution: add kind_hlgroup item to complete function
(glepnir)
closes: #15561
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
In #14674, the Brazilian and Portuguese localization files were
erroneously combined, even though those are separate locales. This
reverts that change, but maintains some of the original typo fixes in
it.
closes: #15557
related: #14674
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The end marker is not required to match the indent of :let when "trim"
is specified, it may also appear without leading whitespace as normal.
closes: #15564
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
* Improve heredoc handling
- Support "trim" for all the embedded scripts.
- Check the indent of "trim" for "let" and all the embedded scripts.
* Update missing part of vim.vim.base in the commit
d164f2a521f8e52e587727657fb1c19e9a25f32a.
* Update gen_syntax_vim.vim to catch up with 9.1.0685's source code.
closes: #15542
Signed-off-by: K.Takata <kentkt@csc.jp>
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
This change does 2 things:
- make sure the mapping <Plug>ManBS sets the buffer to modified
to avoid a potential error message
- remove commented q mapping
fixes#15538closes: #15547
Signed-off-by: Luca Saccarola <github.e41mv@aleeas.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Obtain and pass through translated messages with this
function.
- If "g:java_foldtext_show_first_or_second_line" is defined,
assign this function to &foldtext.
closes: #15549
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: zip-plugin has problems with special characters
(user202729)
Solution: escape '*?[\' on Unix and handle those chars
a bit differently on MS-Windows, add a test, check
before overwriting files
runtime(zip): small fixes for zip plugin
This does the following:
- verify the unzip plugin is executable when loading the autoload plugin
- handle extracting file names with '[*?\' in its name correctly by
escaping those characters for the unzip command (and handle those
characters a bit differently on MS-Windows, since the quoting is different)
- verify, that the extract plugin is not overwriting a file (could cause
a hang, because unzip asking for confirmation)
- add a test zip file which contains those special file names
fixes: #15505closes: #15519
Signed-off-by: Christian Brabandt <cb@256bit.org>
- It's clear that :s and :& are Ex commands, so remove "command" along
with the duplicate "the".
- Use "or" instead of "and" following "without".
closes: #15527
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Problem: tests: Analyzing failed screendumps is hard
Solution: Facilitate the viewing of rendered screendumps under src/
add some documentation on how to use the viewdumps.vim
script (Aliaksei Budavei)
With the submitted "viewdumps.vim" script, a few manual
steps in typical workflows (see below) can be automated.
The updated "README.txt" contains additional information.
============================================================
Reviewing LOCAL failed screendump tests can be arranged as
follows:
1) Run tests and generate screendumps:
------------------------------------------------------------
cd /path/to/fork/src/testdir
make
------------------------------------------------------------
2) Examine the screendumps from the "failed" directory:
------------------------------------------------------------
../vim -u NONE -S viewdumps.vim
------------------------------------------------------------
============================================================
Reviewing UPLOADED failed screendump tests can be arranged
as follows (it can be further locally scripted):
1) Fetch an artifact with failed screendumps from
"github.com/vim/vim/actions/runs/A_ID/artifacts/B_ID".
2) Extract the archived files:
------------------------------------------------------------
unzip /tmp/failed-tests.zip -d /tmp
------------------------------------------------------------
3) Set up the "dumps" directory. Create a symlink to
"/path/to/fork/dirs/dumps" in the extracted directories so
that term_dumpdiff() can be used. (The lookup algorithm
resolves "dumps" for every loaded filename. So, with
"/tmp/src/testdir/failed/*.dump" files passed as script
arguments, the algorithm will make the files in
"/tmp/src/testdir/dumps" queried.)
------------------------------------------------------------
cd /path/to/fork
ln -s $(pwd)/src/testdir/dumps /tmp/src/testdir/dumps
------------------------------------------------------------
4) Examine the extracted screendumps:
------------------------------------------------------------
./src/vim -u NONE -S src/testdir/viewdumps.vim \
/tmp/src/testdir/failed/*.dump
------------------------------------------------------------
5) Clean up:
------------------------------------------------------------
unlink /tmp/src/testdir/dumps
rm -rf /tmp/src
------------------------------------------------------------
============================================================
Reviewing SUBMITTED FOR PULL REQUEST screendump tests can be
arranged as follows (it can be further locally scripted):
1) List the fetched changeset and write the changed "dumps"
filenames to "/tmp/filelist":
------------------------------------------------------------
cd /path/to/fork
git switch prs/1234
git diff-index --relative=src/testdir/dumps/ \
--name-only prs/1234~1 > /tmp/filelist
------------------------------------------------------------
2) Reconcile relative filepaths, and copy next-to-be-updated
"dumps" files in the "failed" directory (note the missing
new screendumps, if any):
------------------------------------------------------------
git switch master
cd src/testdir/dumps
test -d ../failed || mkdir ../failed
cp -t ../failed $(cat /tmp/filelist)
------------------------------------------------------------
3) Remember about the introduced INVERTED relation between
"dumps" and "failed", i.e. the files to be committed are in
"dumps" already and their previous versions are in "failed";
therefore, copy the missing new screendumps from "dumps" to
"failed" (otherwise these won't be shown):
------------------------------------------------------------
git switch prs/1234
cp -t ../failed foo_10.dump foo_11.dump foo_12.dump
------------------------------------------------------------
4) Examine the screendumps from the "failed" directory (new
screendumps will be shown with no difference between their
versions):
------------------------------------------------------------
cd ..
../vim -u NONE -S viewdumps.vim
------------------------------------------------------------
closes: #15515
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Otherwise, if the executable to be verified does not exist,
this would cause a false-positive in the 'IsSafeExecutable()' check,
because 'exepath(executable)' returns an empty string and
'fnamemodify('', ':p:h')' returns the current directory and as a result
the 'IsSafeExecutable()' returns false (for the wrong reason).
Signed-off-by: Christian Brabandt <cb@256bit.org>
by removing the non-portable GNU variable and using $? instead
Note: this only works for rules with single dependencies.
closes: #15493
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- all: PMenuMatch and PMenuMatchSel for 8c/16c
- habamax:
- revert VertSplit to solid background color
- remove gitCommitSummary link to Title
- make TabLineFill same as StatuslineNC
closes: #15506
Signed-off-by: Maxim Kim <habamax@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The end marker must appear on line of its own without any trailing
whitespace.
Whitespace is incorrectly allowed before all end markers. Limiting this
only to heredocs where "trim" was specified, and with the correct
indent, is currently an intractable problem given that contained syntax
groups (in this case :let) cannot be limited to start patterns.
Highlight interpolated expressions when "eval" is specified.
cloess: #15511
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
It's a personal annoyance for me. I have to edit yaml files on a lot of
customer environments and whenever you type '#' at the start of the
line, the commented line will be indented by whatever indent the
previous line had.
I hate this seriously, because it makes un-commenting painful. So let's
fix this. But instead of messing with the indent function, let's just
remove the '0#' from cinkeys, so that Vim won't perform re-indenting
when commenting out such a yaml file.
closes: #15494
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: :keeppatterns does not retain the substitute pattern
for a :s command
Solution: preserve the last substitute pattern when used with the
:keeppatterns command modifier (Gregory Anders)
closes: #15497
Signed-off-by: Gregory Anders <greg@gpanders.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: g:netrw_use_errorwindow=2 does not work
without +balloon_eval.
Solution: Check for popup_atcursor().
related: #15501
Signed-off-by: Damien <141588647+xrandomname@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
by removing the non-portable GNU variable and using $? instead
Note: this only works for rules with single dependencies.
closes: #15502
related: #15493
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
by removing the non-portable GNU variable and using $? instead
Note: this only works for rules with single dependencies.
closes: #15503
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: style issues with man pages
Solution: update man pages and test_xxd.vim, since it uses
the xxd man page (RestorerZ)
closes: #15489
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Inside batch files, for-variables must be written as %%i, not %i.
closes: #15453
Signed-off-by: Ken Takata <kentkt@csc.jp>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Closing parentheses were often highlighted as errors.
Add a syntax sync command to reduce the error.
Also fix that `defined` was not highlighted as an operator inside
parentheses. E.g.:
```
if defined foo (
if defined bar (
...
)
)
```
The first `defined` was highlighted but the second one was not.
related: #15453
Signed-off-by: Ken Takata <kentkt@csc.jp>
Signed-off-by: Christian Brabandt <cb@256bit.org>
It addresses the following issues:
- Fix highlight of let and var javascript keywords
According to runtime/doc/syntax.txt, Identifier is for variable names.
let/var are not variable names, they are keywords
- Add highlighting for "from" keyword in javascript
- Fix highlight of function keyword in javascript
According to docs, Function is for function names, so the function
keyword should just be Keyword.
- Fix highlight of static keyword in javascript
According to vim docs: StorageClass static, register, volatile, etc.
closes: #15480
Signed-off-by: Tobiasz Laskowski <tobil4sk@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
I added help tags for them in the syntax.txt file since this is the only
place they are mentioned.
closes: #15486
Signed-off-by: JJCUBER <34446698+JJCUBER@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
With the submitted "viewdumps.vim" script, a few manual
steps in typical workflows (see below) can be automated.
The updated "README.txt" contains additional information.
============================================================
Reviewing LOCAL failed syntax tests can be arranged as
follows:
1) Run tests and generate screendumps:
------------------------------------------------------------
cd /path/to/fork/runtime/syntax
make clean test
------------------------------------------------------------
2) Examine the screendumps from the "failed" directory:
------------------------------------------------------------
../../src/vim --clean -S testdir/viewdumps.vim
------------------------------------------------------------
============================================================
Reviewing UPLOADED failed syntax tests can be arranged as
follows (it can be further locally scripted):
1) Fetch an artifact with failed screendumps from
"github.com/vim/vim/actions/runs/A_ID/artifacts/B_ID".
2) Extract the archived files:
------------------------------------------------------------
unzip /tmp/failed-tests.zip -d /tmp
------------------------------------------------------------
3) Set up the "dumps" directory. Create a symlink to
"/path/to/fork/dirs/dumps" in the extracted directories so
that term_dumpdiff() can be used. (The lookup algorithm
resolves "dumps" for every loaded filename. So, with
"/tmp/runtime/syntax/testdir/failed/*.dump" files passed
as script arguments, the algorithm will make the files in
"/tmp/runtime/syntax/testdir/dumps" queried.)
------------------------------------------------------------
cd /path/to/fork
ln -s $(pwd)/runtime/syntax/testdir/dumps \
/tmp/runtime/syntax/testdir/dumps
------------------------------------------------------------
4) Examine the extracted screendumps:
------------------------------------------------------------
./src/vim --clean -S runtime/syntax/testdir/viewdumps.vim \
/tmp/runtime/syntax/testdir/failed/*.dump
------------------------------------------------------------
5) Clean up:
------------------------------------------------------------
unlink /tmp/runtime/syntax/testdir/dumps
rm -rf /tmp/runtime
------------------------------------------------------------
============================================================
Reviewing SUBMITTED FOR PULL REQUEST syntax tests can be
arranged as follows (it can be further locally scripted):
1) List the fetched changeset and write the changed "dumps"
filenames to "/tmp/filelist":
------------------------------------------------------------
cd /path/to/fork
git switch prs/1234
git diff-index --relative=runtime/syntax/testdir/dumps/ \
--name-only prs/1234~1 > /tmp/filelist
------------------------------------------------------------
2) Reconcile relative filepaths, and copy next-to-be-updated
"dumps" files in the "failed" directory (note the missing
new screendumps, if any):
------------------------------------------------------------
git switch master
cd runtime/syntax/testdir/dumps
cp -t ../failed $(cat /tmp/filelist)
------------------------------------------------------------
3) Remember about the introduced INVERTED relation between
"dumps" and "failed", i.e. the files to be committed are in
"dumps" already and their previous versions are in "failed";
therefore, copy the missing new screendumps from "dumps" to
"failed" (otherwise these won't be shown):
------------------------------------------------------------
git switch prs/1234
cp -t ../failed foo_10.dump foo_11.dump foo_12.dump
------------------------------------------------------------
4) Examine the screendumps from the "failed" directory (new
screendumps will be shown with no difference between their
versions):
------------------------------------------------------------
cd ..
../../../src/vim --clean -S viewdumps.vim
------------------------------------------------------------
closes: #15476
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
