Problem: statusline may look different than expected
Solution: do not check for highlighting of stl and stlnc characters
statusline fillchar may be different than expected
If the highlighting group for the statusline for the current window
|hl-StatusLine| or the non-current window |hl-StatusLineNC| are cleared
(or do not differ from each other), than Vim will use the hard-coded
fallback values '^' (for the non-current windows) or '=' (for the
current window). I believe this was done, to make sure the statusline
will always be visible and be distinguishable from the rest of the
window.
However, this may be unexpected, if a user explicitly defined those
fillchar characters just to notice that those values are then not used
by Vim.
So, let's assume users know what they are doing and just always return
the configured stl and stlnc values. And if they want the statusline to
be non-distinguishable from the rest of the window space, so be it. It
is their responsibility and Vim shall not know better what to use.
fixes: #13366closes: #13488
Signed-off-by: Christian Brabandt <cb@256bit.org>
Do not rely on the fact, that the last line matches warning, error,
inappropriate or unrecognized to determine if an error occurred. It
could also be a file, contains such a keyword.
So make the error detection slightly more strict and only assume an
error occured, if in addition to those 4 keywords, also a space matches
(this assumes the error message contains a space), which luckily on Unix
not many files match by default.
The whole if condition seems however slightly dubious. In case an error
happened, this would probably already be caught in the previous if
statement, since this checks for the return code of the tar program.
There may however be tar implementations, that do not set the exit code
for some kind of error (but print an error message)? But let's keep this
check for now, not many people have noticed this behaviour until now, so
it seems to work reasonably well anyhow.
related: #6425fixes: #13489
Signed-off-by: Christian Brabandt <cb@256bit.org>
`:return` cannot be used outside of `:function` (or `:def`) in older Vims
lacking Vim9script support or in Neovim, even when evaluation is being skipped
in the dead `:else` branch.
Instead, use the pattern described in `:h vim9-mix`, which uses `:finish` to end
script processing before it reaches the vim9script stuff.
Signed-off-by: Sean Dewar <seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Also, enable the zip and gzip plugins by default, unless those variables
were not explicitly set by the user.
related: #13413
Signed-off-by: Christian Brabandt <cb@256bit.org>
Follow up to 816fbcc26 (patch 9.0.1833: [security] runtime file fixes,
2023-08-31) and f7ac0ef50 (runtime: don't execute external commands when
loading ftplugins, 2023-09-06).
This puts the logic for safe executable checks in a single place, by introducing
a central vim library, so all filetypes benefit from consistency.
Notable changes:
- dist#vim because the (autoload) namespace for a new runtime support
library. Supporting functions should get documentation. It might make
life easier for NeoVim devs to make the documentation a new file
rather than cram it into existing files, though we may want
cross-references to it somewhere…
- The gzip and zip plugins need to be opted into by enabling execution
of those programs (or the global plugin_exec). This needs
documentation or discussion.
- This fixes a bug in the zig plugin: code setting s:tmp_cwd was removed
in f7ac0ef50 (runtime: don't execute external commands when loading
ftplugins, 2023-09-06), but the variable was still referenced. Since
the new function takes care of that automatically, the variable is no
longer needed.
Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Add shDerefOffset to shDerefVarArray.
Example code:
```bash
declare -a a=({a..z})
echo "${a[@]:1:3}"
```
Signed-off-by: Christian Brabandt <cb@256bit.org>
Strace output, depending on parameters (-ttf this time), can dump both
times and pid:
1038 07:14:20.959262 execve("./e.py", ["./e.py"], 0x7ffca1422840 /* 51 vars */) = 0 <0.000150>
So loose the regexp matching this, so that the above is matched too.
Fixes#13481.
Co-authored-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Christian Brabandt <cb@256bit.org>
add shDblParen to shLoopList to correctly highlight
arithmetic expressions for Bash and Ksh
This should allow code such as:
```bash
declare -i i j
for i in foo bar
do ((j = 1 << j))
done
```
Signed-off-by: Lucien Grondin <grondilu@yahoo.fr>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Not all secure options document their status
Solution: Describe secure context :set restrictions in each help entry
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: several problems with type aliases
Solution: Check for more error conditions, add tests,
fix issues
Check for more error conditions and add additional tests
fixes #13434
fixes #13437
fixes #13438closes#13441
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: No support for type aliases
Solution: Implement :type command
A type definition is giving a name to a type specification. This also known
type alias.
:type ListOfStrings = list<string>
The type alias can be used wherever a built-in type can be used. The type
alias name must start with an upper case character.
closes: #13407
Signed-off-by: Christian Brabandt <cb@256bit.org>
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
* Update Debian runtime files
Add mantic as a supported Ubuntu release and move buster/kinetic to
unsupported.
Add syntax highlighting for deb822sources filetype.
Add debsources ftplugin to set relevant comment options.
Move common version information to shared/debversions.vim
Closes#11934
Co-authored-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Co-authored-by: James Addison <jay@jp-hosting.net>
Co-authored-by: Viktor Szépe <viktor@szepe.net>
Signed-off-by: James McCoy <jamessan@jamessan.com>
* Add myself as codeowner for Debian-related runtime files
Signed-off-by: James McCoy <jamessan@jamessan.com>
---------
Signed-off-by: James McCoy <jamessan@jamessan.com>
Co-authored-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Co-authored-by: James Addison <jay@jp-hosting.net>
Co-authored-by: Viktor Szépe <viktor@szepe.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: objdump files not recognized
Solution: detect *.objdump files, add a filetype plugin
Added the objdump file/text format
closes: #13425
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Colin Kennedy <colinvfx@gmail.com>
Problem: [security] disallow setting env in restricted mode
Solution: Setting environment variables in restricted mode could
potentially be used to execute shell commands. Disallow this.
restricted mode: disable allow setting of environment variables
Setting environment variables in restricted mode, may have some unwanted
consequences. So, for example by setting $GCONV_PATH in restricted mode
and then calling the iconv() function, one may be able to execute some
unwanted payload, because the `iconv_open()` function internally uses
the `$GCONV_PATH` variable to find its conversion data.
So let's disable setting environment variables, even so this is no
complete protection, since we are not clearing the existing environment.
I tried a few ways but wasn't successful :(
One could also argue to disable the iconv() function completely in
restricted mode, but who knows what other API functions can be
influenced by setting some other unrelated environment variables.
So let's leave it as it is currently.
closes: #13394
See: https://huntr.com/bounties/b0a2eda1-459c-4e36-98e6-0cc7d7faccfe/
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: cannot use buffer-number for errorformat
Solution: add support for parsing a buffer number using '%b' in
'errorformat'
closes: #13419
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: pacman hooks are detected as conf filetype
Solution: make it consistent to pacman.conf and detect those
hooks as confini
Because confini has much better syntax highlighting than conf.
For reference, I identified pacman.conf and pacman hooks as dosini in
https://github.com/vim/vim/pull/6335, then
https://github.com/vim/vim/pull/10213 changed them to conf, then
https://github.com/vim/vim/pull/10518 changed pacman.conf to confini but
forgot to change hooks.
closes: #13399
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Guido Cella <guido@guidocella.xyz>
Problem: Janet files are not recognised
Solution: Add filename and shebang detection (without
adding an extra filetype plugin)
Those are used by the Janet language:
http://www.janet-lang.orgcloses: #13400
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: not able to detect xkb filetypes
Solution: Detect files below /u/s/X11/xkb as xkb files (without adding
an extra filetype)
Those files are used from the X11 xkb extension
closes: #13401
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Guido Cella <guido@guidocella.xyz>
Problem: *.{gn,gni} files are not recognized
Solution: Detect some as gn filetype (without adding an extra filetype)
Those come from: https://gn.googlesource.com/gn/closes: #13405
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Amaan Qureshi <amaanq12@gmail.com>
- update and correct the documentation for varargs for Vim9 and make
sure to mention that a <list> type is required.
- mention that 3match is used the matchparen plugin before 9.0.2054
(actually this is not correct, but before that patch, Vim used the
hardcoded id 3)
closes: #13403closes: #13409
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
Fix the pattern used by comment-motion mappings to match the start of a
block comment.
Block-comment start lines were being ignored if the previous line
contained a double-quote character anywhere in the line. Line comments
should only be ignored if the previous line is a full-line comment and,
therefore, part of the current block comment.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: outstanding exceptions may be skipped
Solution: When restoring exception state, process remaining outstanding
exceptions
closes: #13386
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: no strict type checks for funcrefs varargs
Solution: Perform strict type checking when declaring funcrefs
with vararg declaration, add tests
closes: #13397
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ernie Rael <errael@raelity.com>
* matchparen: do not use hard-coded match id
Instead of using the hard-coded match id 3, which may also be used by
other plugins, let the matchparen plugin use whatever ids are
automatically returned when calling matchaddpos().
For backwards-compatibility, keep the `:3match` call, which will still
use the hard-coded id 3 (as mentioned in :h :3match).
closes: #13381
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: no digraph for quadruple prime
Solution: add quadruple prime digraph using 4'
closes: #13380
Signed-off-by: Jonathan Wright <quaggy@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Jonathan Wright <quaggy@gmail.com>
Update runtime files from upstream (https://github.com/zig/zig.vim) at
commit 54c216e5306a5c3878a60596aacb94dca8652ab9.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Test_cq_zero_exmode fails without channel feature
Solution: Make the test check the channel feature
closes: #13365
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: trim(): hard to use default mask (partly revert v9.0.2040)
Solution: use default mask when it is empty
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
Currently, an empty 'mask' will make 'trim()' call return 'text' value
that is passed in unmodified. It is unlikely that someone is using it,
so the chances of scripts being broken by this change are low.
Also, this reverts commit 9.0.2040 (which uses v:none for the default
and requires to use an empty string instead).
closes: #13358
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Illia Bobyr <illia.bobyr@gmail.com>
Merging syntax file from gutenye/json5.vim, modified to include proper
vim header.
See: https://github.com/vim/vim/issues/8499
Signed-off-by: Mazunki Hoksaas <rolferen@gmail.com>
Co-authored-by: Guten Ye <ywzhaifei@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: trim(): hard to use default mask
Solution: Use default 'mask' when it is v:none
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
'v:none' is already used to mean "use the default argument value" in
user defined functions. See |none-function_argument| in help.
closes: #13363
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Illia Bobyr <illia.bobyr@gmail.com>
Problem: A few remaining cmdline completion issues with C-E/Y
Solution: Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not
used at the end
Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not used at the end
A few places in the cmdline completion code only works properly when the
user hits Tab (or 'wildchar') at the end of the cmdline, even though
it's supposed to work even in the middle of the line.
For fuzzy search, `:e ++ff`, and `:set hl=`, fix completion code to make
sure to use `xp_pattern_len` instead of assuming the entire `xp_pattern`
is the search pattern (since it contains texts after the cursor).
Fix Ctrl-E / Ctrl-Y to not jump to the end when canceling/accepting a
wildmenu completion. Also, make them work even when not using
`set wildoptions+=pum` as there is no drawback to doing so.
(Related issue where this was brought up: #13331)
closes: #13362
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: [security] use-after-free with wildmenu
Solution: properly clean up the wildmenu when exiting
Fix wildchar/wildmenu/pum memory corruption with special wildchar's
Currently, using `wildchar=<Esc>` or `wildchar=<C-\>` can lead to a
memory corruption if using wildmenu+pum, or wrong states if only using
wildmenu. This is due to the code only using one single place inside the
cmdline process loop to perform wild menu clean up (by checking
`end_wildmenu`) but there are other odd situations where the loop could
have exited and we need a post-loop clean up just to be sure. If the
clean up was not done you would have a stale popup menu referring to
invalid memory, or if not using popup menu, incorrect status line (if
`laststatus=0`).
For example, if you hit `<Esc>` two times when it's wildchar, there's a
hard-coded behavior to exit command-line as a failsafe for user, and if
you hit `<C-\><C-\><C-N>` it will also exit command-line, but the clean
up code would not have hit because of specialized `<C-\>` handling.
Fix Ctrl-E / Ctrl-Y to not cancel/accept wildmenu if they are also
used for 'wildchar'/'wildcharm'. Currently they don't behave properly,
and also have potentially memory unsafe behavior as the logic is
currently not accounting for this situation and try to do both.
(Previous patch that addressed this: #11677)
Also, correctly document Escape key behavior (double-hit it to escape)
in wildchar docs as it's previously undocumented.
In addition, block known invalid chars to be set in `wildchar` option,
such as Ctrl-C and `<CR>`. This is just to make it clear to the user
they shouldn't be set, and is not required for this bug fix.
closes: #13361
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
