Problem: Divide by zero with getmousepos() and 'smoothscroll'.
Solution: Don't compute skip_lines when width1 is zero.
(zeertzjq)
closes: #14747
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: protected class and funcrefs accessible outside the class
(Aliaksei Budavei)
Solution: Check if class and object funcrefs are protected
(Yegappan)
closes: #14407
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Not enough tests for the slice() function.
Solution: Test with multibyte chars, and in both Legacy and Vim9 script.
Update docs to be clearer about how it treats composing chars.
(zeertzjq)
closes: #14275
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot easily get the list of matches
Solution: Add the matchstrlist() and matchbufline() Vim script
functions (Yegappan Lakshmanan)
closes: #13766
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: No test for mode() when executing Ex commands
Solution: Add some test cases and simplify several other test cases.
Also add a few more test cases for ModeChanged.
closes: #13588
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Problem with initializing the length of range() lists
Solution: Set length explicitly when it shouldn't contain any items
range() may cause a wrong calculation of list length, which may later
then cause a segfault in list_find(). This is usually not a problem,
because range_list_materialize() calculates the length, when it
materializes the list.
In addition, in list_find() when the length of the range was wrongly
initialized, it may seem to be valid, so the check for list index
out-of-bounds will not be true, because it is called before the list is
actually materialized. And so we may eventually try to access a null
pointer, causing a segfault.
So this patch does 3 things:
- In f_range(), when we know that the list should be empty, explicitly
set the list->lv_len value to zero. This should happen, when
start is larger than end (in case the stride is positive) or
end is larger than start when the stride is negative.
This should fix the underlying issue properly. However,
- as a safety measure, let's check that the requested index is not
out of range one more time, after the list has been materialized
and return NULL in case it suddenly is.
- add a few more tests to verify the behaviour.
fixes: #13557closes: #13563
Co-authored-by: Tim Pope <tpope@github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: trim(): hard to use default mask (partly revert v9.0.2040)
Solution: use default mask when it is empty
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
Currently, an empty 'mask' will make 'trim()' call return 'text' value
that is passed in unmodified. It is unlikely that someone is using it,
so the chances of scripts being broken by this change are low.
Also, this reverts commit 9.0.2040 (which uses v:none for the default
and requires to use an empty string instead).
closes: #13358
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Illia Bobyr <illia.bobyr@gmail.com>
Problem: trim(): hard to use default mask
Solution: Use default 'mask' when it is v:none
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
'v:none' is already used to mean "use the default argument value" in
user defined functions. See |none-function_argument| in help.
closes: #13363
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Illia Bobyr <illia.bobyr@gmail.com>
Problem: Cannot accurately get mouse clicking position when clicking on
a TAB or with virtual text.
Solution: Add a "coladd" field to getmousepos() result.
closes: #13335
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: When clicking in the middle of a TAB, getmousepos() returns
the column of the next char instead of the TAB.
Solution: Break out of the loop when the vcol to find is inside current
char. Fix invalid memory access when calling virtcol2col() on
an empty line.
closes: #13321
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: win32: missing '**' expansion test (after v9.0.1947)
Solution: Add test for MS-Windows
win32: Add "**" test
Vim supports "**" on MS-Windows. However, it is not tested by
`Test_glob_extended_bash`.
Unlike Unix, it doesn't use 'shell' and doesn't support {,} expansion.
So, I added as a separate test.
related: #13205closes: #13250
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: Bash Expansion test fails on Windows/MacOS
Solution: Disable Test_glob_extended_bash for now
This test doesn't work on Windows even if bash can be executed, since
the globstar functionality has only been enabled in Unix builds of Vim
(Commit 9eb1ce5315, patch 9.0.1946).
closes: #13205
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: filename expansion using ** in bash may fail
Solution: Try to enable the globstar setting
Starting with bash 4.0 it supports extended globbing using the globstar
shell option. This makes matching recursively below a certain directory
using the ** pattern work as expected nowadays. However, we need to
explicitly enable this using the 'shopt -s globstar' bash command.
So let's check the bash environment variable $BASH_VERSINFO (which is
supported since bash 3.0 and conditionally enable the globstar option,
if the major version is at least 4. For older bashs, this at least
shouldn't cause errors (unless one is using really ancient bash 2.X or
something).
closes: #13002closes: #13144
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: mode() doesn't indicate command line for terminal
Solution: make it return 'ct' for command-line from Terminal mode
closes: #6265closes: #13017closes: #13018
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: h-east <h.east.727@gmail.com>
Problem: Need more state() tests
Solution: Add a few more tests for operater pending mode and register
yank command
closes: #12883
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: author
Problem: missing winid argument for virtcol()
Solution: Add a {winid} argument to virtcol()
Other functions col(), charcol() and virtcol2col() support a {winid}
argument, so it makes sense for virtcol() to also support than.
Also add test for virtcol2col() with 'showbreak' and {winid}.
closes: #12633
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: wrong error messages when passing wrong types to count()
Solution: fix it
This fixes two problems:
1. When passing wrong type to {ic} argument of count(), two error
messages are given, the second of which is misleading.
2. When passing wrong type to {comp} argument of count(), the error
message doesn't mention that {comp} may be a String.
closes: #12825
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: charidx() and utf16idx() result is not consistent with byteidx().
Solution: When the index is equal to the length of the text return the
lenght of the text instead of -1. (Yegappan Lakshmanan,
closes#12503)
Problem: screenchar(), screenchars() and screenstring() do not work
properly when 'encoding' is set to a double-byte encoding.
Solution: Fix the way the bytes of the characters are obtained.
(issue #12469)
Problem: no functions for converting from/to UTF-16 index.
Solution: Add UTF-16 flag to existing funtions and add strutf16len() and
utf16idx(). (Yegappan Lakshmanan, closes#12216)
Problem: col() and charcol() only work for the current window.
Solution: Add an optional winid argument. (Yegappan Lakshmanan,
closes#11466, closes#11461)
Problem: Wrong argument for append() gives two error messages.
Solution: When getting an error for a number argument don't try using it as
a string. (closes#11335)
