patch 7.4.1766

Problem:    Building instructions for MS-Windows are outdated.
Solution:   Mention setting SDK_INCLUDE_DIR. (Ben Franklin, closes #771)  Move
            outdated instructions further down.

src/INSTALLpc.txt

@@ -11,9 +11,9 @@ The file "feature.h" can be edited to match your preferences. You can skip
 this, then you will get the default behavior as is documented, which should
 be fine for most people.
 
-With the exception of two sections (Windows 3.1 and MS-DOS), this document
+This document assumes that you are building Vim for Win32 or later (Windows
-assumes that you are building Vim for Win32 or later.
+XP/2003/Vista/7/8/10).  There are also instructions for pre-XP systems, but
-(Windows 95/98/Me/NT/2000/XP/2003/Vista/7/8/10)
+they might no longer work.
 
 
 Contents:
@@ -36,9 +36,7 @@ Contents:
 
 
 The currently preferred method is using the free Visual C++ Toolkit 2008
-|msvc-2008-express|, the produced binary runs on most MS-Windows systems.  If
+|msvc-2008-express|, the produced binary runs on most MS-Windows systems.
-you need the executable to run on Windows 98 or ME, use the 2003 one
-|msvc-2003-toolkit|.
 
 
 1. Microsoft Visual C++
@@ -87,6 +85,69 @@ These files have been supplied by George V. Reilly, Ben Singer, Ken Scott and
 Ron Aaron; they have been tested.
 
 
+Visual C++ 2008 Express Edition       *msvc-2008-express*
+-------------------------------
+
+Visual C++ 2008 Express Edition can be downloaded for free from:
+    http://www.microsoft.com/express/downloads/
+This includes the IDE and the debugger.
+
+To set the environment execute the msvc2008.bat script.  You can then build
+Vim with Make_mvc.mak.
+
+For building 64 bit binaries you also need to install the SDK:
+"Microsoft Windows SDK for Windows 7 and .NET Framework 3.5 SP1"
+You don't need the examples and documentation.
+
+If you get an error that Win32.mak can't be found, you have to set the
+variable SDK_INCLUDE_DIR.  For example, on Windows 10, installation of MSVC
+puts include files in the following directory:
+    set SDK_INCLUDE_DIR=C:\Program Files\Microsoft SDKs\Windows\v6.0A\Include
+
+
+Visual C++ 2010 Express Edition       *msvc-2010-express*
+-------------------------------
+
+Visual C++ 2010 Express Edition can be downloaded for free from:
+    http://www.microsoft.com/express/vc/Default.aspx
+This includes the IDE and the debugger.
+
+To set the environment execute the msvc2010.bat script.  You can then build
+Vim with Make_mvc.mak.
+
+
+Targeting Windows XP with new MSVC      *new-msvc-windows-xp*
+----------------------------------
+
+Beginning with Visual C++ 2012, Microsoft changed the behavior of LINK.EXE
+so that it targets Windows 6.0 (Vista) by default.  In order to override
+this, the target Windows version number needs to be passed to LINK like
+follows:
+    LINK ... /subsystem:console,5.01
+
+Make_mvc.mak now supports a macro SUBSYSTEM_VER to pass the Windows version.
+Use lines like follows to target Windows XP (assuming using Visual C++ 2012
+under 64-bit Windows):
+    set WinSdk71=%ProgramFiles(x86)%\Microsoft SDKs\Windows\v7.1A
+    set SDK_INCLUDE_DIR=%WinSdk71%\Include
+    set INCLUDE=%WinSdk71%\Include;%INCLUDE%
+    set LIB=%WinSdk71%\Lib;%LIB%
+    set PATH=%WinSdk71%\Bin;%PATH%
+    set CL=/D_USING_V110_SDK71_
+    nmake -f Make_mvc.mak ... WINVER=0x0501 SUBSYSTEM_VER=5.01
+
+The following Visual C++ team blog can serve as a reference page:
+    http://blogs.msdn.com/b/vcblog/archive/2012/10/08/windows-xp-targeting-with-c-in-visual-studio-2012.aspx
+
+
+OLDER VERSIONS
+
+The minimal supported version is Windows XP. Building with older compilers
+might still work, but these instructions might be outdated.
+
+If you need the executable to run on Windows 98 or ME, use the 2003 one
+|msvc-2003-toolkit|.
+
 Visual C++ Toolkit 2003				*msvc-2003-toolkit*
 -----------------------
 
@@ -172,55 +233,6 @@ Instructions for integrating the Platform SDK into VC Express:
     http://msdn.microsoft.com/vstudio/express/visualc/usingpsdk/default.aspx
 
 
-Visual C++ 2008 Express Edition       *msvc-2008-express*
--------------------------------
-
-Visual C++ 2008 Express Edition can be downloaded for free from:
-    http://www.microsoft.com/express/downloads/
-This includes the IDE and the debugger.
-
-To set the environment execute the msvc2008.bat script.  You can then build
-Vim with Make_mvc.mak.
-
-For building 64 bit binaries you also need to install the SDK:
-"Microsoft Windows SDK for Windows 7 and .NET Framework 3.5 SP1"
-You don't need the examples and documentation.
-
-
-Visual C++ 2010 Express Edition       *msvc-2010-express*
--------------------------------
-
-Visual C++ 2010 Express Edition can be downloaded for free from:
-    http://www.microsoft.com/express/vc/Default.aspx
-This includes the IDE and the debugger.
-
-To set the environment execute the msvc2010.bat script.  You can then build
-Vim with Make_mvc.mak.
-
-
-Targeting Windows XP with new MSVC      *new-msvc-windows-xp*
-----------------------------------
-
-Beginning with Visual C++ 2012, Microsoft changed the behavior of LINK.EXE
-so that it targets Windows 6.0 (Vista) by default.  In order to override
-this, the target Windows version number needs to be passed to LINK like
-follows:
-    LINK ... /subsystem:console,5.01
-
-Make_mvc.mak now supports a macro SUBSYSTEM_VER to pass the Windows version.
-Use lines like follows to target Windows XP (assuming using Visual C++ 2012
-under 64-bit Windows):
-    set WinSdk71=%ProgramFiles(x86)%\Microsoft SDKs\Windows\v7.1A
-    set SDK_INCLUDE_DIR=%WinSdk71%\Include
-    set INCLUDE=%WinSdk71%\Include;%INCLUDE%
-    set LIB=%WinSdk71%\Lib;%LIB%
-    set PATH=%WinSdk71%\Bin;%PATH%
-    set CL=/D_USING_V110_SDK71_
-    nmake -f Make_mvc.mak ... WINVER=0x0501 SUBSYSTEM_VER=5.01
-
-The following Visual C++ team blog can serve as a reference page:
-    http://blogs.msdn.com/b/vcblog/archive/2012/10/08/windows-xp-targeting-with-c-in-visual-studio-2012.aspx
-
 
 2. MinGW
 ========
@@ -253,10 +265,14 @@ System, Advanced, and edit the environment from there. If you use msys2
 compilers, set your installed paths:
 
     C:\msys2\mingw32\bin
+or
+    C:\msys64\mingw32\bin
 
 for 32bit. And 64bit:
 
     C:\msys2\mingw64\bin
+or
+    C:\msys64\mingw64\bin
 
 Test if gcc is on your path.  From a CMD (or COMMAND on '95/98) window:
 
@@ -605,7 +621,7 @@ A) Using MSVC
 If you want to link with ruby, normally you must use the same compiler as
 which was used to build the ruby binary.  RubyInstaller is built with MinGW,
 so normally you cannot use MSVC for building Vim if you want to link with
-RubyInstaller.  If you use a different complier, there are mainly two problems:
+RubyInstaller.  If you use a different compiler, there are mainly two problems:
 config.h and Ruby's DLL name. Here are the steps for working around them:
 
   1) Download and Install RubyInstaller.
@@ -639,9 +655,10 @@ config.h and Ruby's DLL name. Here are the steps for working around them:
       nmake -f Make_mvc.mak
           RUBY=C:\Ruby22 DYNAMIC_RUBY=yes RUBY_VER=22 RUBY_VER_LONG=2.2.0
           RUBY_MSVCRT_NAME=msvcrt
-          WINVER=0x500
+          WINVER=0x501
 
-    WINVER must be set to >=0x500, when building with Ruby 2.1 or later.
+    If you set WINVER explicitly, it must be set to >=0x500, when building
+    with Ruby 2.1 or later.  (Default is 0x501.)
     When using this trick, you also need to set RUBY_MSVCRT_NAME to msvcrt
     which is used for the Ruby's DLL name.
 
@@ -652,9 +669,11 @@ After you install RubyInstaller, just type this (as one line):
 
     mingw32-make -f Make_ming.mak
         RUBY=C:/Ruby22 DYNAMIC_RUBY=yes RUBY_VER=22 RUBY_VER_LONG=2.2.0
-        WINVER=0x500
+        WINVER=0x501
+
+If you set WINVER explicitly, it must be set to >=0x500, when building with
+Ruby 2.1 or later.  (Default is 0x501.)
 
-WINVER must be set to >=0x500, when building with Ruby 2.1 or later.
 
 
 12. Building with Tcl support

src/version.c

@@ -748,6 +748,8 @@ static char *(features[]) =
 
 static int included_patches[] =
 {   /* Add new patch number below this line */
+/**/
+    1766,
 /**/
     1765,
 /**/